Type Type |
|---|
|
For Use On For Use On |
|---|
|
Container Type Container Type |
|---|
 |  |
| Single-Use Packet | Can |
 |  |
| Pen | Jar |
Thermal Conductivity Thermal Conductivity |
|---|
|
|
Consistency Consistency |
|---|
|
Surface Resistivity Surface Resistivity |
|---|
|
Viscosity Viscosity |
|---|
|
Volume Resistivity Volume Resistivity |
|---|
|
About Structural Adhesives
More
Conductive Adhesives for Electronics
An alternative to solder, these flexible, silver-filled adhesives accommodate joint movement. Use them to bond electrical components and repair circuits. The size listed is the combined total of the two parts.
Container | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size, oz. | Type | Begins to Harden | Reaches Full Strength | Thermal Conductivity, W/m-K | Surface Resistivity, ohms-cm | Mix Ratio | Consistency | Temp. Range, °F | Color | For Joining | Each | |
| 0.09 | One-Time-Use Packet | 3 hrs. | 24 hrs. | 1.55 | 0.05 | 1:1.15 | Paste | -75° to 230° | Silver | Ceramic, Glass, Metal | 0000000 | 000000 |
| 0.35 | One-Time-Use Packet | 3 hrs. | 24 hrs. | 1.55 | 0.05 | 1:1.15 | Paste | -75° to 230° | Silver | Ceramic, Glass, Metal | 0000000 | 00000 |
| 0.5 | Can | 4 hrs. | 5 days | 7.93 | 0.0004 | 1:1 | Paste | 80° to 265° | Silver | Metal | 0000000 | 000000 |
| 1 | Can | 4 hrs. | 5 days | 7.93 | 0.0004 | 1:1 | Paste | 80° to 265° | Silver | Metal | 0000000 | 000000 |
Conductive Surface Fillers for Electronics
A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components.
Surface fillers in one-time-use packets and jars come as two parts. The size listed is the combined total of the two parts.
Surface filler in a pen dispenses as a thin, ready-to-use liquid that fills in pitting and small gaps. It’s often used on circuit boards to fix components or to prototype new systems.
Volume resistivity and surface resistivity measure how well a material opposes the flow of electricity. The lower the rating, the more electricity it conducts.
Thermal conductivity measures a material’s ability to transfer heat. The higher the rating, the more heat it transfers.
Container | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Thermal Conductivity, W/m-K | Volume Resistivity, ohms-cm | Surface Resistivity, ohms/sq. | Consistency | Mix Ratio | Temp. Range, °F | Color | For Use On | Each | |
Loctite® Surface Fillers | ||||||||||||||
| 3888 | 0.1 | One-Time-Use Packet | 90 min. | 24 hrs. | 1.44 | 0.001 | __ | Paste | 100:6 | -40° to 170° | Silver | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Polycarbonate Plastic | 0000000 | 000000 |
Surface Fillers | ||||||||||||||
| __ | 0.1 | One-Time-Use Packet | 90 min. | 24 hrs. | 6.05 | 0.009 | __ | Paste | 100:6 | -75° to 250° | Silver | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Ceramic, Glass | 0000000 | 00000 |
| __ | 0.2 | Pen | 3 min. | 60 min. | Not Rated | __ | 0.050 | Thin Liquid | __ | -65° to 300° | Silver | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium | 0000000 | 00000 |
| __ | 0.4 | One-Time-Use Packet | 90 min. | 24 hrs. | 6.05 | 0.009 | __ | Paste | 100:6 | -75° to 250° | Silver | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Ceramic, Glass | 0000000 | 000000 |
| __ | 0.5 | Jar | 4 hrs. | 5 days | 5.77 | 0.0004 | __ | Paste | 1:1 | Not Rated to 300° | Silver | Aluminum, Brass, Copper, Steel, Stainless Steel | 0000000 | 000000 |
| __ | 1 | Jar | 4 hrs. | 5 days | 5.77 | 0.0004 | __ | Paste | 1:1 | Not Rated to 300° | Silver | Aluminum, Brass, Copper, Steel, Stainless Steel | 0000000 | 000000 |