Jaw Style Jaw Style |
---|
![]() | External/Internal |
![]() | Internal |
Thread Size Thread Size |
---|
Overall Length Overall Length |
---|
|
|
|
Number of Jaws Number of Jaws |
---|
|
More
More
Tackle a wide variety of pulling jobs—use pullers in these sets to grip objects from the outside or the inside. To grip objects on the outside, attach puller jaws with tips facing in. To grip objects from inside, attach the puller jaws with tips facing out.
Puller Material | Includes | Each | |
Steel | Crossbar Oil-Seal Puller Hook 2-Jaw Jaw Bar 2/3 Reversible-Jaw External/Internal Grip Puller (For 1 1/2"-4 1/4" ID; For 1 1/2"-4 1/2" OD; 3 1/2" Reach) with Slide Hammer Three Sets of Jaws (2 3/8", 4 1/8", and 6 1/2" Reaches) | 0000000 | 0000000 |
Steel | 2-Jaw Bridge-Style Internal Grip Puller (For 7/8"-2" ID; 1" Reach) 2-Jaw External Grip Puller—5-ton Capacity (For Up To 6" OD; 5 1/2" Reach) 2-Jaw External Grip Puller—7-ton Capacity (For Up To 9" OD; 5" Reach) 2-Jaw Internal Grip Puller (For 7/8"-2 1/8" ID; 1" Reach) with 1 3/4-lb. Slide Hammer 2-Jaw Jaw Bar for 2/3 Reversible-Jaw External/Internal Grip Puller 2/3 Reversible-Jaw External/Internal Grip Puller (For 1 1/2"-4 1/4" ID; For 1 1/2"-4 1/2" OD; 3 1/2" Reach) with Slide Hammer 2/3-Jaw External Grip Puller—7-ton Capacity (For Up To 11" OD; 8 3/4" Reach) Adjustable Face-Grip Puller (For Up To 4 5/8" OD; 4 3/4" Reach) with 5 5/8” Long Forcing Screw Bearing Separator (For 1/2"-4 1/4" OD) Bearing Separator (For 1/8"-1 7/8" OD) Face-Grip Puller (For 1 1/2"-4 1/4" OD) with 5 1/2” Long Forcing Screw Face-Grip Puller (For 2"-7 3/4" OD) with 11 5/8” Long Forcing Screw Six Cap Screws (3 of each: 3/8"-24 × 3" Lg.; 3/8"-16 × 3" Lg.) for Adjustable Face-Grip Puller | 0000000 | 000000 |
Replacement Adjusting Cone for 6317K34 | 00000000 | Each | 000000 |
Grip objects on the outside or inside to tackle both types of pulling jobs. To grip objects on the outside, attach puller jaws with tips facing in. To grip objects from inside, attach the puller jaws with tips facing out.
Puller has combination 2/3 jaws—it comes with a jaw bar so you can change between 2-jaw and 3-jaw configurations to suit your application. Use the slide hammer to extract hard-to-remove objects.
Optional crossbar allows you to pull objects that have tapped holes. Thread the center hole onto the slide hammer; requires two 3/8" dia. cap screws (not included).
Replacement jaw bar converts the 3-jaw puller to a 2-jaw puller.
For ID | For OD | Reach | Puller Material | T-Handle Material | Each | |
1 1/4"-4 1/4" | 1"-4 1/2" | 1 1/4", 3" | Steel | Steel | 000000 | 0000000 |
Optional Internal Jaws (For 3/4"-2 1/2" ID; 2 3/8" Reach) | 0000000 | Each | 000000 |
Optional External/Internal Jaws (For 1 1/4"-3 1/2" ID; For 1"-4 1/2" OD; 3 3/4" Reach) | 0000000 | Each | 00000 |
Optional External/Internal Jaws (For 1 1/2"-4 1/2" ID; For 3/4"-5" OD; 4 1/8" Reach) | 0000000 | Each | 00000 |
Optional External/Internal Jaws (For 2 3/4"-5 1/2" ID; For 3/4"-7 1/2" OD; 6 1/2" Reach) | 0000000 | Each | 00000 |
Optional 5-lb. Slide Hammer (5/8"-18 Thread Size) | 000000 | Each | 00000 |
Replacement Jaw Bar (5/8"-18 Thread Size) | 000000 | Each | 00000 |
Optional Puller Hook (For 5/8" Minimum ID) | 000000 | Each | 00000 |
Optional Crossbar (For 1 7/8"-5 5/8" ID; For 1 7/8"-5 5/8" OD; For 0.375" Dia. Cap Screw; Fasteners Included: No) | 000000 | Each | 00000 |
Replacement 2 1/2-lb. Slide Hammer (5/8"-18 Thread Size) | 000000 | Each | 00000 |
Replacement Adjusting Cone | 00000000 | Each | 00000 |
Complete with a locking storage box, use the pullers in this set to tackle a wide variety of pulling jobs—use pullers to grip objects from the outside or the inside. To grip objects on the outside, attach puller jaws with tips facing in. To grip objects from inside, attach the puller jaws with tips facing out.
Puller Material | Includes | Each | |
Steel | 2-Jaw Internal Grip Puller (For 1/2"-1 1/2" ID; 3/4" Reach) with 1 3/4-lb. Slide Hammer 2-Jaw Jaw Bar for 2/3 Reversible-Jaw External/Internal Grip Puller 2/3 Reversible-Jaw External/Internal Grip Puller (For 1 1/2"-4 1/4" ID; For 1 1/2"-4 1/2" OD; 3 1/2" Reach) with Slide Hammer 2/3-Jaw External Grip Puller—5-ton Capacity (For Up To 7" OD; 3 1/4" Reach) 2/3-Jaw External Grip Puller—7-ton Capacity (For Up To 10 1/2" OD; 5" Reach) Adjustable Face-Grip Puller (For Up To 4 5/8" OD; 4 3/4" Reach) with 5 5/8” Long Forcing Screw Bearing Separator (For 1/2"-4 1/4" OD) Bearing Separator (For 1/8"-1 7/8" OD) Face-Grip Puller (For 1 1/2"-4 1/2" OD) with 13” Long Forcing Screw Six Cap Screws (3 of each: 3/8"-24 × 3" Lg.; 3/8"-16 × 3" Lg.) for Adjustable Face-Grip Puller Two Sets of Long-Reach Jaws (Three Jaws for 5-ton Capacity Puller and Three Jaws for 7-ton Capacity Puller) Steel Locking Storage Box (25 3/4" Height; 29 1/2" Width; 10" Depth) | 00000000 | 000000000 |
Use adapters on the ends of forcing screws and face-grip puller legs when pulling shafts, bearing caps, and pinions.
Thread Size | Gender | Each | |
1/4"-20 × 5/8"-18 | Male × Female | 000000 | 000000 |
5/16"-18 × 5/8"-18 | Male × Female | 000000 | 00000 |
3/8"-16 × 5/8"-18 | Male × Female | 000000 | 00000 |
3/8"-24 × 5/8"-18 | Male × Female | 000000 | 00000 |
7/16"-14 × 5/8"-18 | Male × Female | 000000 | 00000 |
7/16"-20 × 5/8"-18 | Male × Female | 000000 | 00000 |
1/2"-13 × 5/8"-18 | Male × Female | 000000 | 00000 |
1/2"-20 × 5/8"-18 | Male × Female | 000000 | 00000 |
5/8"-18 × 1"-14 | Male × Female | 000000 | 00000 |
Make your old puller work like new by replacing worn forcing screws.
Thread Size | Lg. | Material | Head Style | Each | |
5/16"-24 | 4 1/8" | Steel | T-Handle | 000000 | 000000 |
5/16"-24 | 5 1/2" | Steel | T-Handle | 00000000 | 00000 |
3/8"-24 | 4 7/8" | Steel | Hex | 000000 | 0000 |
3/8"-24 | 7" | Steel | T-Handle | 00000000 | 00000 |
1/2"-20 | 9" | Steel | Hex | 00000000 | 0000 |
9/16"-16 | 10 1/8" | Steel | Hex | 00000000 | 00000 |
9/16"-20 | 6 7/8" | Steel | Hex | 0000000 | 00000 |
5/8"-14 | 12 3/4" | Steel | Hex | 00000000 | 00000 |
5/8"-18 | 5 1/2" | Steel | Hex | 0000000 | 00000 |
5/8"-18 | 13" | Steel | Hex | 0000000 | 00000 |
11/16"-18 | 9" | Steel | Hex | 0000000 | 00000 |
3/4"-14 | 16 1/4" | Steel | Hex | 00000000 | 00000 |
3/4"-14 | 19 1/4" | Steel | Hex | 00000000 | 00000 |
7/8"-9 | 8" | Steel | Hex | 0000000 | 000000 |
1"-14 | 13 3/4" | Steel | Hex | 0000000 | 000000 |
1 1/8"-14 | 26" | Steel | Hex | 00000000 | 000000 |
1 1/4"-12 | 16" | Steel | Hex | 0000000 | 000000 |
1 1/4"-14 | 31 1/2" | Steel | Hex | 00000000 | 000000 |
1 1/2"-6 | 14" | Steel | Hex | 0000000 | 000000 |
Pull bearings, gears, and other parts from hollow shafts and housings. Place one of these adapters in the end of your hollow shaft to provide a surface for the forcing screw to push against.
Get a grip on objects with blind holes—this puller set has a variety of expanding collets that secure bearings and bushings from inside.
Use the pin and pin adapter to expand the collet inside the object you’re pulling. When the collet is secure, use the bridge with the forcing screw and nut to apply force to the object you’re removing. When you need additional force to extract hard-to-remove objects, use the bridge with the slide hammer. Forcefully slide the weight to the top of the slide bar to yank hard on the object you’re pulling.
For Shaft Dia. | Pin Dia. | Puller Material | Includes | Each | |
5/16"-1 1/4" | 5/32", 3/16", 9/32", 13/32", 1/2" | Steel | Five Pullers Slide Hammer Rod (17" Long) Five Pins Pin Adapter 2 1/2-lb. Slide Hammer (5/8"-18 Thread Size) Bridge (6 3/4" Reach; 6" Width) Forcing Screw Nut (3/4"-16 Thread Size) Forcing Screws (5/8"-18 and 3/4"-16 Thread Sizes; 12 11/32" Long) Plastic Case | 0000000 | 0000000 |
Get a grip on objects with blind holes—these pullers have an expanding collet that secures bearings and bushings from inside.
Pin and pin adapter are required to expand the collet inside the object you’re pulling. When the collet is secure, use a bridge with a forcing screw and forcing screw nut to apply force to the object you’re removing (all sold separately). When you need additional force, use the bridge with the slide hammer (sold separately).
Pullers | Pins | Pin Adapter | ||||||
---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Puller Material | For Pin Dia. | Each | Each | Each | |||
5/16"-11/32" | Steel | 5/32" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
11/32"-7/16" | Steel | 3/16" | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
7/16"-9/16" | Steel | 9/32" | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
9/16"-7/8" | Steel | 13/32" | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
7/8"-1 1/4" | Steel | 1/2" | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
Attach your locking pliers to a slide hammer to pull stubborn objects. Replace the pliers’ adjusting screw with one of these adapters and thread the other end onto your slide hammer.
Pull dents out of sheet metal panels.
Overall Lg. | Shaft Thread Size | Includes | Each | |
22" | 1/2"-20 | Nosepiece, L-Shaped Puller with Two Screws, Door Edge Tool with Two Nuts | 0000000 | 000000 |
![]() | ![]() Shown with Optional 7/8" Dia. Face |
![]() |
Strike work in tight spaces where standard hammers don't have room to swing. The steel face on these hammers is hard enough to demolish material and drive pins, punches, and masonry drills. To use, pull back the slide bar and forcefully push the bar forward into the hammer's steel chamber. This drives the face into the workpiece for a powerful strike. All have a ribbed grip for slip resistance.
Optional 7/8" diameter faces allow for more precise strikes than the included 2" face and are good for driving small pins.
Head Wt., lbs. | Face Dia. | Overall Lg. | Face Mount Type | Face Material | Handle Material | Grip Style | Handle Replaceable | Includes | Each | |
14 | 2" | 30" | Press Fit | Steel | Steel | Ribbed | Nonreplaceable | Carrying Bag | 0000000 | 0000000 |
21 | 2" | 46" | Press Fit | Steel | Steel | Ribbed | Nonreplaceable | Carrying Bag | 0000000 | 000000 |
Optional 7/8" Dia. Push-On Steel Face | 0000000 | Each | 000000 |