Hardwired Smoke Detectors
Link multiple detectors in tandem to warn occupants outside the vicinity about potential fire hazards; if one unit is activated, they're all activated. These detectors produce their own signal when visible smoke particles are detected. A backup battery provides protection in case of power failure. Detectors cannot be sold to Canada due to import regulations.
Volume | Wd. | Dp. | Max. Number of Tandem Detectors | Electrical Connection | Number of Wire Leads | Voltage | Specifications Met | Cannot Be Sold To | Each | |
| 85 dBA @ 10 ft. | 5 1/2" | 1 3/4" | 12 | Wire Leads | 3 | 120V AC | UL Listed | Canada | 0000000 | 000000 |
| Volume | Dia. | Dp. | Max. Number of Tandem Detectors | Electrical Connection | Number of Wire Leads | Voltage | Specifications Met | Cannot Be Sold To | Each | |
| 85 dBA @ 10 ft. | 5 1/4" | 2 5/16" | 12 | Wire Leads | 3 | 120V AC | ETL Listed, UL 1638, UL 217 | Canada | 0000000 | 0000000 |
Battery-Powered Smoke Detectors
Warn about the presence of smoke with these stand-alone detectors. They sound an audible alarm when invisible smoke particles are detected. They run on a nonreplaceable battery with a 10-year life. Detectors cannot be sold to Canada due to product labeling requirements.
| Volume | Dia. | Dp. | Tandem Signaling Capable | Batteries Included | Cannot Be Sold To | Each | |
| 85 dBA @ 10 ft. | 5" | 2" | No | Yes | Canada | 0000000 | 000000 |
Smoke and Carbon Monoxide Detectors
When visible smoke particles or carbon monoxide is detected, this stand-alone detector alerts you with an audible alarm. It cannot be sold to Canada due to import regulations.
| Volume | Dia. | Dp. | Tandem Signaling Capable | Batteries Included | Specifications Met | Cannot Be Sold To | Each | |
| 85 dBA @ 10 ft. | 5 1/4" | 1 1/2" | No | Yes | UL 217, UL 2034 | Canada | 0000000 | 000000 |
Smoke Detectors for HVAC Systems
Detect the presence of smoke in ducts and shut down HVAC units to avoid circulation. These sensors and controllers have standard RJ45 connections, so they work with most alarm systems and quickly snap in without needing to connect individual wires to terminals. UL and C-UL listed as well as FM and MEA approved, they meet strict safety standards. Choose from a sensor, controller, or sensor and controller unit.
Sensors measure rapid changes in air flow from smoke and fire but won’t register dust and debris, so they won’t cause a false alarm.
Controllers send signals from your sensor to a fire alarm control panel, which closes HVAC dampers when smoke is detected. Controllers can be installed up to 15 ft. away from your sensors and connected with cable. Connect up to two sensors per controller to monitor two sections of ductwork.
Sensor and controller units come with one controller and one sensor. Connect another sensor to cover another spot in your HVAC system.
Sensors require sampling tubes (sold separately) to bring in air from the duct. Mount the sampling tube inside the duct and connect it to the sensor on the outside of the duct by drilling a hole with the included template. For duct up to 36" wide, the sampling tube’s length should be 2/3 the width of the duct.
If your smoke detectors are hard to access, use remote test stations (sold separately) to check that they’re working properly from a convenient location.
| Lg. | Wd. | Dp. | Max. Number of Tandem Sensors | Wire Connection Type | Output Voltage | Input Voltage | Temp. Range, °F | Mounting Hardware Included | Specifications Met | Each | |
| 8 3/4" | 5 1/2" | 1 7/8" | 30 | Screw Terminals | 18V DC | 24V AC, 24V DC, 120V AC, 230V AC | 0° to 155° | Yes | C-UL Listed, FM Approved, UL Listed | 0000000 | 0000000 |
| Lg. | Wd. | Dp. | For Max. Number of Sensors | Max. Number of Tandem Controllers | Wire Connection Type | Output Voltage | Input Voltage | Temp. Range, °F | Mounting Hardware Included | Specifications Met | Each | |
| 6 3/4" | 5 1/2" | 1 7/8" | 2 | 15 | Screw Terminals | 18V DC | 24V AC, 24V DC, 120V AC, 230V AC | 0° to 155° | Yes | C-UL Listed, FM Approved, UL Listed | 0000000 | 0000000 |
| Lg. | Wd. | Dp. | Max. Number of Tandem Controllers | Max. Number of Tandem Sensors | Wire Connection Type | Output Voltage | Input Voltage | Temp. Range, °F | Mounting Hardware Included | Specifications Met | Each | |
| 14 1/2" | 5 1/2" | 1 7/8" | 15 | 30 | Screw Terminals | 18V DC | 24V AC, 24V DC, 120V AC, 230V AC | 0° to 155° | Yes | C-UL Listed, FM Approved, UL Listed | 0000000 | 0000000 |
Check that your HVAC smoke detector is working properly. Wire these test stations to your smoke detector controller to test difficult to access smoke detectors from a convenient location. Indicator lights show if your smoke detector is powered on, if it senses smoke, and if its sensors are too dirty to detect smoke and need cleaning. These test stations activate with the turn of a key so you don’t turn them on by accident.
| Actuator Style | Switch Starting Position | No. of Terminals | Industry Designation | Voltage | Temp. Range, °F | Wire Connection Type | Wd. | Ht. | Mounting Hardware Included | Specifications Met | Each | |
| Key | 1 Off (Normally Open) | 5 | SPST-NO | 24V AC, 24V DC, 120V AC, 230V AC | 32° to 130° | Screw Terminals | 3" | 4 3/4" | Yes | C-UL Listed, FM Approved, UL Listed | 0000000 | 000000 |
Remote Test Stations for Smoke Detectors for HVAC Systems
Check that your HVAC smoke detector is working properly. Wire these test stations to your smoke detector controller to test difficult to access smoke detectors from a convenient location. Indicator lights show if your smoke detector is powered on, if it senses smoke, and if its sensors are too dirty to detect smoke and need cleaning. These test stations activate with the turn of a key so you don’t turn them on by accident.
| Actuator Style | Switch Starting Position | No. of Terminals | Industry Designation | Voltage | Temp. Range, °F | Wire Connection Type | Wd. | Ht. | Mounting Hardware Included | Specifications Met | Each | |
| Key | 1 Off (Normally Open) | 5 | SPST-NO | 24V AC, 24V DC, 120V AC, 230V AC | 32° to 130° | Screw Terminals | 3" | 4 3/4" | Yes | C-UL Listed, FM Approved, UL Listed | 0000000 | 000000 |
Heat Detectors for Fire Alarm Systems
When the temperature climbs above the temperature rating, the detector sends a signal to your control panel.
| Temperature Rating, °F | Dia. | Dp. | Tandem Signaling Capable | Electrical Connection | Number of Wire Leads | Voltage | Current | Specifications Met | Each | |
For Indoor Use | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 135° | 4 9/16" | 1 11/16" | No | Screw Terminals | __ | 12V DC 24V DC 120V AC | 1 A @ 12 V DC 1 A @ 24 V DC 3 A @ 120 V AC | FM Approved, UL Listed | 0000000 | 000000 |
| 194° | 4 9/16" | 1 11/16" | No | Screw Terminals | __ | 12V DC 24V DC 120V AC | 1 A @ 12 V DC 1 A @ 24 V DC 3 A @ 120 V AC | FM Approved, UL Listed | 0000000 | 00000 |
For Outdoor Use | ||||||||||
| 135° | 2" | 4 1/8" | No | Wire Leads | 4 | 12V DC 24V DC 120V AC | 1 A @ 12 V DC 1 A @ 24 V DC 5 A @ 120 V AC | FM Approved, UL Listed | 0000000 | 00000 |
| 194° | 2" | 4 1/8" | No | Wire Leads | 4 | 12V DC 24V DC 120V AC | 1 A @ 12 V DC 1 A @ 24 V DC 5 A @ 120 V AC | FM Approved, UL Listed | 0000000 | 00000 |
Smoke Detector Guards
Protect your detectors from damage and tampering.
| Dia. | Dp. | Material | Color | Mount Type | Fasteners Included | Specifications Met | Each | |
| 8 1/4" | 2 3/4" | Polyester Coated Steel | White | Surface | Yes | UL Listed | 0000000 | 000000 |
Smoke Detector Testers
This spray smoke simulates fire conditions to make sure your detectors are working.
Extension arm and add-ons let you test out-of-reach smoke detectors. Up to five add-ons can be connected to the extension arm.
Fire Alarm Control Panels
Connect and monitor your fire alarm system. Control panel comes with all the circuitry needed to power and monitor devices for up to five zones. These devices can include up to 30 smoke or carbon monoxide detectors as well as an unlimited number of heat detectors and fire alarm stations. Indicators show the status of each zone. The control panel has one relay for connecting alarms such as buzzers, bells, and lights.
The control panel requires two 12-volt batteries (not included) for operation; in case of power failure, it will use the batteries as a backup power source.
| For Max. Number of Zones | For Max. Number of Detectors | Ht. | Wd. | Dp. | Material | Color | Electrical Connection | Voltage | Batteries Included | Number of Batteries Required | Battery Size | Specifications Met | Each | |
| 5 | 30 | 19 1/2" | 14 1/4" | 3 3/4" | Steel | Red | Screw Terminals | 120V AC | No | 2 | 12V | UL Listed | 0000000 | 0000000 |
Heat Alarms
When temperatures get too high, these alarms sound off. Use them in garages, boiler rooms, and other areas where dust, debris, or light smoke can set off false smoke alarms. Wire them directly into your building’s electrical system. You can also link multiple alarms in tandem, so if one detects heat, they all go off. A backup battery keeps them working during power outages.
Mounting Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Activation Temp., °F | Volume | Wire Connection Type | Number of Wire Leads | Voltage | Dia. | Dp. | Max. Number of Tandem Detectors | Batteries Included | Mounting Fasteners Included | Number of | Hole Dia. | Specifications Met | Includes | Each | |
| 135° | 85 dBA @ 10 ft. | Wire Leads | 3 | 120V AC | 5" | 2" | 18 | Yes | No | 6 | 1/4" | California Fire Marshal Approved, UL 539 | Mounting Plate, Wire Connector | 0000000 | 000000 |