Mount these adapters in a panel cutout.

Connect two DisplayPort cords of the same gender and connection type.

Connect two fiber-optic cords that have the same gender and connection type. These adapters mount to panels of any thickness, as long as you drill a mounting hole first.

Connect two stereo cords through a panel with these adapters.

Unlike traditional RJ45 connectors found in data centers, these connectors stand up to rugged industrial environments since they tightly thread to devices with M12 connections, sealing out contaminants and resisting shaking loose from vibration. Use them to transfer high-speed data between sensors, switches, computers, IO modules, programmable logic controllers (PLCs), and other equipment.

Protect connections in washdown environments while maintaining access—these RJ45 plugs and adapters latch together securely, yet quickly detach.

Create D-sub connection points in panels, cases, and enclosure walls.

A threaded M8 end on these connectors keeps contaminants out and withstands vibration better than RJ45 ends on traditional Ethernet cords.

These connectors are designed for use in audio equipment.

Switch your device on and off without needing a separate switch. These connectors work with industry standard cords often found on power supplies, appliances, and other electronic devices.

With a built-in switch, these connectors run power to appliances, power supplies, and other electronic devices while also filtering damaging EMI (electromagnetic interference).

Bring power into electronic devices while protecting them from harmful electromagnetic interference (EMI).

Send power to your device using the inlet, then route power to another device through the outlet—all with standard IEC power cords.

Snap these receptacles into a cutout on an electrical panel—no screws or clips needed.

Use these connectors in general purpose residential and commercial applications.

Also known as twist-lock devices, these connectors withstand tough, repetitive use, and are more durable than standard turn-lock connectors. They turn to lock together when mated to prevent accidental disconnection.

Because they tightly thread to M12 connections, these connectors won’t let contaminants in or come loose from vibration in rugged industrial environments and automated systems as they send power and signal or just power to your equipment.

Block signal interference from nearby devices, such as motors and transmitters, while maintaining a strong, stable connection for M12 threads.

Protect harsh environment M12 connectors when not in use.

Also known as pico connectors, these connectors are often used with 8 mm and smaller proximity switches and photoelectric switches.

Screw these micro M16 connectors together to securely connect equipment.

Often used to send power and signal to automated systems, motors, and pumps, these mini connectors carry higher currents than M5, M8, and M12 connectors.

Some of the smallest signal/power connectors we offer, these connectors fit in tight spaces and are often used in electronics.

Rated to MIL-DTL-5015 specifications, these connectors are compatible with other products that meet the same standard. They screw together for a secure connection.

These connectors meet MIL-DTL-26482, so they're compatible with other products that meet the same standard. Quickly mate by pushing them together.

A current rating up to 400 amps makes these connectors suitable for use in industrial machinery and floodlights.

These connectors meet international standards IEC 309-1 and 309-2. They prevent an electrical arc when separating mated connectors, so you can safely connect and disconnect with the power on.

With thick threads similar to a light bulb, these connectors take only a few turns to lock into place for a secure connection in washdown and high-vibration areas. Detach them just as quickly for frequent maintenance.

Power robotic arms and other high-amperage machines in motor controls, conveyors, and sorting and packaging systems from your main M35 power line.

Mount these receptacles to control cabinets and equipment in order to quickly connect and disconnect M29 power cords.

Attach these caps to the socket end of washdown USB cords to maintain an IP67 rating when cords are not in use.

Connect devices such as computers, printers, and mobile devices.

Often used in labs, storage facilities, and offices, the shielding blocks low to moderate signal interference from nearby equipment and devices. These cords have a flange on the socket end to mount them in a panel cutout.

Blocks mount in a cutout and have terminals on both sides.

A single row of terminals fits in narrow spaces.

Best for equipment requiring regular servicing, these blocks disconnect without having to remove any wiring thanks to their plug-and-socket design. Their recessed screws prevent shorts by reducing the risk you’ll connect two circuits with a screwdriver or other tool.

Made of ceramic, these blocks withstand high-temperature applications that reach up to 1110° F such as ovens and furnaces. They have recessed screws to reduce the chance you’ll cause a short by accidentally connecting two circuits with a screwdriver or other tool.

Save time when wiring connections in a junction box; these blocks come already installed in an enclosure.

Solder the pins on these blocks directly to your circuit board.

Protect connections against corrosion.These bars are tin-plated copper and have stainless steel terminals.

Stack multiple ring or spade terminals on the stud terminal; the current flows through the stacked terminals.

The built-in contact block in these switches extends behind the panel half the depth of most other 22 mm switches, saving valuable space.

A single-piece construction prevents the contact block from separating from the actuator in high-vibration applications.

Clearly mark your emergency push-button switches.

Use these switches where ignitable gas and dust may be present. Their contact blocks are UL listed for Class I, Division 2, Groups B, C, and D hazardous locations.

The face of these switches mounts flush against a panel, so they're easy to clean and hard to damage.

Use these switches where ignitable gas and dust may be present. Their contact blocks are UL listed for Class I, Division 2, Groups B, C, and D hazardous locations.

Because these switches mount flush against a panel, they're easy to clean and hard to damage.

Install in 16 mm dia. cutouts.

Install in 14 mm dia. cutouts.

Also known as tactile switches, these are small enough to fit inside a computer keyboard.

Operate low-voltage devices that require less than 48 volts, such as doorbells and buzzers.

Also known as high-inrush current switches, these switches can handle starting currents up to 10 times greater than their rating, such as when a motor starts.

Maximize space in a panel—these switches are smaller than most standard rocker switches.

Choose from a variety of messages and colored lenses to combine a rocker with a base and wiring socket for a complete switch.

These switches meet MIL-S-3950.

A rubber seal protects these switches from splashing water.

Maximize the space in a panel—these switches are half the size of most toggle switches.

Rated NEMA 4, 13, and IP66, these metal switches are protected from washdowns and oil/coolant spraying. Install them in 30 mm dia. cutouts.

Switches are rated NEMA 4, 13, and IP66.

Maximize space in a panel with these miniature switches.

Install these key switches in 3/4" dia. panel cutouts. They require a key to turn circuits on or off, limiting access to sensitive equipment.

These 16 mm switches require a key to turn circuits on or off, limiting access to sensitive equipment.

Choose an actuator and contact block to make your own 30 mm switch.

Choose an actuator and contact block to make your own 16 mm switch.

Use fingerprints to confirm the identity of personnel before granting access to secure areas or equipment.

Turn these switches by hand.

Push and release the button to activate—no electricity required.

Install these switches in a panel cutout.

Rated IP69K, these switches are protected from high-pressure and high-temperature washdowns.

Mount these switches inside your enclosure to prevent it from opening when power is on—actuating the switch disconnects power and releases the door.

More precise than analog potentiometers, these have a three-digit display that is easy to read.

Made of brass, these fittings have good corrosion resistance.

A built-in shut-off valve stops airflow when the fittings are disconnected from tubing.

Made of nickel-plated brass, these fittings have better corrosion resistance than unplated brass fittings.

An all-metal body and built-in tube support or dual seals allow these fittings to handle the highest pressure ratings of all our push-to-connect tube fittings.

Use at pressures up to 250 psi.

Fittings have good corrosion resistance.

You don't need a clamp to secure these fittings to tubing. They have a nut on the barbed end that tightens to holds the tubing in place.

Made of brass, these couplings are more durable than plastic couplings.

With no latch, these couplings have a compact design to fit in small spaces. They can handle pressures up to 700 psi.

A single sleeve (ferrule) compresses the tubing as you tighten the nut on these fittings, creating a strong seal. They are brass for good corrosion resistance.

Quick-disconnect couplings consist of a plug and a socket that join with a latch so you can easily connect and disconnect your line. Use in applications up to 120 psi.

Fittings have a sleeve that bites into tubing as you tighten the nut to form a seal in applications up to 120 psi. Also known as flareless fittings.

These fittings keep their strength in moist environments and meet NSF/ANSI 61 for drinking water. Also known as instant fittings.

Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. Use in applications up to 150 psi.

Quick-disconnect couplings consist of a plug and a socket that join with a latch so you can easily connect and disconnect your line. Use in applications up to 150 psi.