With a threaded connection on both ends, these mufflers can be installed anywhere in your line.

A small hex size makes these high-flow mufflers a great fit for cramped spaces.

Adjust the flow by turning the screw. Use these mufflers with air-powered tools and cylinders to reduce noise and filter exhaust fumes.

Replace your muffler less often—these have a filter design that stays clean longer than porous mufflers.

Also known as reclassifiers, these mufflers have a clear reservoir with a drain plug to remove and store oil mist for reuse.

Install these mufflers in air-powered drills and other loud equipment. They filter exhaust fumes and reduce noise by 30-35 dB, a reduction that's equivalent to putting in earplugs.

Suitable for use with welding equipment, these mufflers are made of flame-resistant materials. They reduce noise by 35-42 dB.

Clean the air going into small blowers and air-powered equipment in tight spaces.

Made of polypropylene, these filters can be used in damp environments where corrosion is a concern.

Made of 100% wool, this is the hardest felt we offer, yet it can still be used for polishing. It is more abrasion resistant and better at damping vibration than other felt. Includes S2-32, S2-24, and S2-20 felt grades.

The most conformable foam tape we offer, use this tape for mounting, gasketing, and damping sound and vibration. It has adhesive on both sides.

Add a slippery surface to difficult-to-bond surfaces, such as plastic, foam, and powder-coated metal.

Reduce noise and vibration in chutes, bins, and similar delivery systems with this UHMW-faced foam tape.

Quiet squeaky floor joists and reduce vibration with this foam tape.

Control the unwanted noise that comes from vibrating panels and support structures. This aluminum foil tape reduces vibration by converting it into a small amount of heat.

These washable plugs are made of soft plastic.

Good for food preparation areas, these earplugs have an enclosed ball bearing that can be sensed by metal detectors.

Earmuffs should be worn with the specified fit to offer proper protection and noise reduction.

Fold these earmuffs for compact storage that's less likely to damage them. Earmuffs should be worn over the head to offer proper protection and noise reduction.

These hard hats give all-in-one head, face, and ear protection. Lift the face shield and earmuffs when not in use.

Distribute these disposable glasses to protect visitors. They fit over prescription eyeglasses.

Grommets along one side make it easy to install these sheets around your facility and quiet noisy areas. Made of vinyl-coated fiberglass, they resist abrasion, oil, dirt, moisture, and most solvents.

The foil facing reflects heat. Use these sheets to quiet noisy areas and line machine enclosures. They’re made of humidity-resistant polyurethane foam.

A urethane coating protects these humidity-resistant polyurethane foam sheets from oil exposure. Use them to quiet noisy areas and line machine enclosures.

These polypropylene foam sheets will not degrade if exposed to moisture and occasional salt water spray. Use them to quiet noisy areas and line machine enclosures.

Furnished with two hangers for easy mounting around your facility, these sheets quiet noisy areas. Made of melamine foam, they are peaked on both sides for good sound absorption in large open spaces.

Suspend these thin sheets to reflect sound and block noise from traveling to other parts of your facility.

Install these adhesive-back sheets to reduce noise from vibrating surfaces, such as duct and equipment housings.

Control the flow of exhaust air while also regulating the exhaust air speed. These valves dump exhaust air to the atmosphere without routing it back through a directional control valve. The 90° elbow shape allows you to install them in tight spaces. Also known as quick exhaust valves.

Choose the pressure range you need. When these valves receive an air signal, they quickly dump exhaust air to the atmosphere without routing it back through a directional control valve to speed up the movement of equipment. They're often used with air compressors that require continuous operation. Also known as quick exhaust valves.

For extremely loud environments, these headsets have noise-canceling ear muffs and an adjustable-volume microphone.

These headphones have an extra-wide headband and padded ear cushions for all-day comfort.