A plastic cover on the barrel provides electrical insulation.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated.

These terminals withstand temperatures up to 900° F.

Easy to install, connect, and disconnect, yet difficult to shake loose. These terminals interlock with each other to make a secure connection.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated.

These terminals withstand temperatures up to 900° F.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated.

These terminals are connected to a single-conductor wire lead.

Loosen your mounting screw to install—the open end eliminates the need to completely remove it.

When heat is applied, the enclosed solder melts and the insulation shrinks, creating the most secure, electrically conductive, and environmentally sealed connection we offer.

Connect wire to a screw or stud at a right angle to fit connections into tight spaces.

Connect two female quick-disconnects.

Use the included crimping tool to install a variety of terminals and butt splices.

Tap a main wire or add a finished terminal to the end of a wire.