With a diameter that’s held to a close tolerance, this material is hardened for increased wear and abrasion resistance.

This material has tighter tolerances than standard 304 stainless steel.

Also known as chrome steel, 52100 is an extremely hard and wear-resistant material. These balls are often used in bearings.

Also known as mild steel, use these low-carbon steel balls in parts that don't require high strength.

Hollow construction reduces weight and allows these balls to float.

The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.

Grade 5 is the strongest of all the titanium alloys thanks to its higher aluminum and vanadium content. It offers a versatile mix of good corrosion resistance, weldability, and formability.

Fill forming bags for shaping metal or use as a counterweight.

Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

Practically nonabsorbent, HDPE won't swell when exposed to moisture. It is denser and more rigid than LDPE, plus it's more chemical resistant.

Among the strongest plastic materials we offer, Torlon PAI has a slippery surface that resists wear. Use it to make high-friction compressor parts, bearings, and seals.

At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

Install tooling balls in a workpiece or fixture to create a precise measurement reference point. Push the shank further into the hole to adjust the height of the ball.

Absorbing impact without cracking or breaking, these plastic pellets are molded into parts that endure bumps, scrapes, and falls.

These pellets resist swelling when exposed to water, making them suitable for use in wet environments. Melt and mold them into desired shapes.

These floats are untethered by a float rod so they can float freely in your tank.

Made of polyethylene, these floats can be used with chemicals, salts, and caustic fluids.

Often used to create bearings, silicon-nitride ceramic is harder than many types of bearing steel but is lightweight and can be easily polished. It also withstands high temperatures.

Often used instead of metal in bearings and rollers, these balls are ideal for applications where strength under heavy loads and wear resistance is needed.

Also called Pyrex and Schott glass, these glass balls resist clouding and pitting and are highly chemical and heat resistant.

FDA compliant for direct contact with food, these balls are often used to clean screens in vibrating sifters in food, beverage, and other sanitary environments. You can also use them as seals in pumps and check valves.

Use these balls as seals in pumps and check valves or let them bounce inside of vibrating sifters for an effective screen cleaner.

Loosen fine particles from the grip of vibrating-sifter screens with the bounce of rubber balls. Also use them as seals in pumps and check valves. They’re made from FDA-listed materials for use with food and beverage.

Use these balls as seals in pumps and check valves, or let them bounce inside of vibrating sifters as an effective screen cleaner.

Ball transfers have a double-sealed ball to keep out dirt and debris. Side vents expel contaminants.

Unlike most ball transfers, which have metal balls, these have a plastic outer ball that rolls on stainless steel inner balls, so there's no metal-on-metal contact that could create and release particles into your clean room. They've also been ultrasonically cleaned and then individually bagged to prevent dust contamination.

These heavy duty ball transfers recess into the mounting surface for a low profile.

The ball in these transfers is spring-loaded to absorb impact.

These ball transfers have capacities up to 2,200 lbs.

These ball transfers have capacities up to 2,400 lbs.

The flange has mounting holes for fastening.

A large-diameter rubber ball handles delicate or polished surfaces. The stem spins and the ball rotates around the stem.

Place stands on a work surface to position pipe while machining.

Add these tiny glass spacers to structural and instant-bond adhesives to keep adhesive from squeezing out during clamping.

Use these inserts in hitch-ball connections.

These rings mount to a trailer and connect to the drawbar coupler or tow hook on a vehicle.

These pins secure inserts to a receiver.

Also known as pintle hitches, drawbar couplers are used with drawbar rings to connect a trailer to your vehicle for towing.