More durable than plastic caps, these provide the most protection from abrasion and impact.

The large domed head extends beyond the diameter of your pipe, rod, or tubing for added protection.

Slide these caps over a tool handle or other round object and use the eye to hang it.

The tethered design allows frequent access to the ends of pipe, tubing, and other round objects without ever misplacing the cap.

These caps have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing.

With a surface resistivity of less than 10⁵ ohms, these caps not only dissipate electrical charges, but can be used as an electrical shield.

These flexible plastic caps are tapered to fit a variety of unthreaded and threaded objects.

Guard the corners of fragile materials such as glass and mirrors.

A vibrant yellow color makes these caps stand out. They are made of flexible rubber that conforms for a snug fit. Pull the tab for easy removal.

Designed for propane tanks such as those on forklifts and grills, these caps protect tank valves during storage and transit. Push the caps onto the valves, then tear their tab to break the seal for easy removal.

Squeeze the dome top to remove these caps. They're commonly used as thread protectors.

Snap these caps into flange bolt holes to safeguard pipe flanges during shipping, storing, and finishing applications. They all have a thick center pad to protect the flange opening and pipe threads from damage.

Protect SAE hydraulic flanges during shipping, storing, and finishing applications.

Sized to fit hex nuts, these caps snap on for a tight hold and provide protection from corrosion.

A one-piece hinged design allows frequent access to screw heads without misplacing the top. To conceal and protect the entire screw head, insert your screw through the hole in the base and flip the hinged top over.

Good for electroplating, paint baking, and powder-coating applications, these plugs withstand temperatures up to 570° F. All are tapered to fit a range of hole diameters.

Sized to fit small openings, these tiny plugs fit snugly but can be removed easily using the flange. Their tapered design fits a range of hole diameters.

Place a plug into an opening and tighten the wing nut—the sides expand to create a seal in holes of varying diameters.

With a compressible flanged top, these plugs are designed to seal the ends of copper tubing often used in water supply lines, refrigerant lines, and HVAC compressors. All are sized to fit standard copper tube dimensions.

Also known as mouse tails, these tiny plugs fit through-hole IDs as small as 0.022”, 0.025", or 0.03”.

Flexible ridges securely hold these plugs in place and allow them to fit a range of hole sizes.

Tapered prongs or a snap-in ring securely hold these plugs in place.

The wings on these plugs expand against the sides of a hole to lock them in place.

These fiberglass bellows withstand temperatures up to 450° F—about twice as much as standard breathable round bellows with flange ends. They also protect against flames and sparks.

Thinner than other round bellows with cuff ends, these flexible bellows are meant for light duty applications.

Add cuff inserts to these flexible bellows for a custom fit.

Suitable for tight spaces, these highly compressible bellows have sealed seams to keep contaminants out.

Attach the cuff end with a hose clamp and screw mount the flange end.

Attach the cuff end with a hose clamp, and screw mount the flange end.

Secure the cuff ends with hose clamps.

Slide these bellows over flat moving surfaces on machinery, such as guideways.

These bellows withstand temperatures up to 500° F—more than twice as much as standard flat bellows.

Slip these bellows over hydraulic cylinder rods to keep them free from debris for a long service life.

Guard 9" and 12" travel Bridgeport milling machines by covering their rear knee/upper column and front knee.

Install these bellows over gas springs to protect their piston rods.

Extend the life of your rigid shaft couplings by blocking out dirt, water, lubricants, and other contaminants. These two-piece covers twist together to form a shell around the coupling.

These sleeves contain a corrosion inhibitor to shield metal parts from corrosion.

These tubes are easier to label and stack than round tubes. To adjust the length, push the ends of the tube together or pull them apart.

Close these tubes with a cap on each end.

Snaps keep this sleeving securely closed, yet permit quick access to contents and allow you to route wires in between the snaps. Use it to easily wrap around wire, cable, and hose without disconnecting them.

Coated with PVC, this polyester sleeving resists chemicals and solvents. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

Unlike traditional sleeving that bunches wire and cable into a circle, this sleeving holds them flat, so it’s good for tight spaces such as vehicle interiors. It has a slit along the entire length so it easily wraps around wire and cable without disconnecting them.

The tightly braided construction makes this polyester sleeving abrasion resistant. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

Rated UL 94 V-2, this sleeving resists combustion and minimizes the spread of flames. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them. It has impact and abrasion resistance similar to conduit, with more flexibility.

This sleeving reflects heat away from contents and withstands temperatures up to 300°F. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them. The corrugated construction gives it impact and abrasion resistance similar to conduit, with more flexibility.

The two halves of this sleeving nest into each other, fully enclosing contents. It has interlocking ridges that overlap to keep out dust and dirt. The corrugated construction gives it the impact and abrasion resistance of conduit, with more flexibility.