These splices can withstand higher temperatures than insulated splices.

Visually confirm your connection through the inspection window in the insulation of these splices.

The most secure, electrically conductive, and environmentally sealed connection we offer, these splices have enclosed solder that melts when heat is applied.

Able to withstand temperatures up to 900°F, these splices are suitable for use in high-heat applications such as ovens, motors, and light fixtures.

Filled with grease, these splices resist moisture and corrosion.

These splices can withstand higher temperatures than insulated splices.

A plastic cover fully insulates these splices.

A plastic cover fully insulates these splices and it's clear so you can visually confirm the connection.

Join wires and cables in some of the dirtiest and wettest locations—from paper mills to marine environments—without special tools.

With a ring of solder on the inside, these heat-shrink splices create secure, water-resistant connections between wires without the need for a crimping tool.

Sealed threads make these splices weather resistant.

Compress the barrel twice on each end for an extra-tight grip in high-vibration applications.

Connect wire without stripping—these splices pierce insulation.

Tap and splice multiple wires in temporarily wet environments and up to six feet underground.

Use a single splice to connect more than two wires.

A plastic cover fully insulates these splices and is clear so you can visually confirm the connection.

No wire stripping is required—these connectors will pierce the insulation.

Filled with silicone, these connectors seal out moisture and prevent corrosion.

Rated to 300° F, these connectors are an excellent choice for use in high-temperature applications such as HID lighting and electric heat.

Grip the wings on these connectors to increase leverage when tightening.

Large enough to be used with a wide range of wire sizes, these connectors can still fit into cramped outlet boxes.

Push stripped wires into connectors for a reliable connection that's faster to install than twisting or crimping.

Filled with gel, these wire taps seal out moisture.

Tap a main wire or add a finished terminal to the end of a wire.

No crimping or wire stripping needed—this assortment includes twist-on wire connectors and insulation-piercing wire taps.

Made of polypropylene, these fittings are lighter in weight than metal barbed hose fittings.

Made of nylon, these fittings are lighter in weight than metal barbed hose fittings.They have sharper barbs than standard barbed hose fittings to grip push-on hose without the need for clamps or ferrules. The more you pull on the fittings, the tighter the hose will grip.

Commonly used in low-pressure welding applications, these fittings connect downstream of your pressure regulator. Slide the barbed end into hose and secure with a crimp-on hose ferrule.

These metal hose fittings have better durability than plastic barbed hose fittings. They are 316 stainless steel for excellent corrosion and chemical resistance. Slide the barbed end into hose and secure with a clamp.

Attach these fittings to garden hose for a variety of water supply applications. They are metal for better durability than plastic garden hose fittings.

Made of nylon, these fittings are lighter in weight than metal garden hose fittings. Attach them to garden hose for a variety of water supply applications.

Insert a pin into the lacing and lock it in place by bending the ends at a 90° angle.

Also known as alligator lacing, this strong, impact-resistant lacing uses a staple driver and installation guide to secure staples. Use on 0.0625" to 0.25" thick belts.

This low-profile lacing requires only a hammer to install so it's good for repairs and tight spaces. Also known as alligator lacing, the lacing teeth bite into the belt to hold. Use on belts up to 0.31" thick.

Templates, bolt breakers, wrench bits, and adapters for installing bolt-on lacing.

Join solid-core round belting by trimming belting ends to a point and twisting them into the threaded ends of these connectors.

More elastic than polyurethane, this leather belting resists permanent stretch for a long service life.

Everything you need to join various belts made of urethane.

Screw one of these connectors into the holes on each end of your Screw-Connect Adjustable-Length V-Belting to connect.