Made of lightweight fiberglass these beams are also nonconductive and will not corrode.

These jacks include extensions for increasing lift height and accessories for prying.

Connect up to five rams to a single pump.

Connect a hose to a ram or pump.

Connect these pumps to a ram to create a hydraulic jack.

Thread one of these plates onto your ram and use the four mounting holes to secure it in place.

Control the flow of oil to adjust ram speed, or shut it off to temporarily hold a load.

These jacks have a short body to fit in low-clearance spaces. The handle pumps from side to side, requiring less vertical space than other bottle jacks.

Pump the handle by hand to raise the jack. Turn the release valve to lower the load.

With fewer moving parts than standard bottle jacks, these are made for frequent use.

Roll from job to job and under hard-to-reach places.

These jacks can be used to lift, spread, push, pull, and clamp.

The turning bar gives you leverage to lift heavier loads than wrench-adjustable screw jacks.

Mount these jacks to equipment to raise and level it.

Use these versatile jacks for lifting, spreading, bending, pushing, and straightening.

Turn the hand wheel to spread ice-melting products and other small particles.

Scrape, cut, and spread material in your food-processing facility with these putty knives—they’re FDA compliant for direct contact with food. Made from plastic, they won’t scratch metal surfaces or corrode from chemicals.

Add any standard threaded handle to extend the reach of these putty knives.

These corrosion-resistant putty knives spread, scrape, and clean paint rollers.

Spread, scrape, and clean paint rollers in hazardous locations with the nonsparking, nonmagnetic brass blade on this putty knife.

Use as a spreader, scraper, and paint-roller cleaner.

The plastic blades on these scrapers won't scratch delicate surfaces.

The large, flat jaws remain parallel when clamping to apply even pressure without denting or marring the workpiece. Pull the handle to lock or release the clamping arm.

Secure a workpiece from the inside, leaving the outside clear for machining.

Spread adhesives with these trowels.

Squeeze out bubbles with these rollers - thin ridges allow air to escape.

Like the claw end of a hammer around a nail, these wedges grip studs or rods from both sides to give you leverage for prying apart two joined components.

Made of ABS plastic, these wedges resist splitting and shattering, even in subzero temperatures.

These wedges won't damage materials such as wood and plastic.

These tools are often used for lifting and aligning machinery or to separate pipe flanges. Also known as banana wedges.

Insert into a tight space and then squeeze the pump to inflate and pry objects apart.

Insert the support rod into a flange bolt hole and turn the hex bolt to drive the spreader.

These flexible extensions add length and bend 180° to get into hard-to-reach areas.

The blades on these spatulas are flexible, self-sharpening, and won't absorb odors.

Use these spatulas once and then throw away to reduce the risk of cross contamination.

A thin, flexible blade makes easy work of smoothing and feathering drywall compound.

Smooth joint compound on both sides of an interior corner with these trowels.

Spread, scrape, and shape mortar.