Pull the chain-grip to unlatch hard-to-reach doors and panels.

Designed with compression springs to withstand vibration better than standard draw latches, these offer a more secure hold.

To prevent accidental opening, these latches have a safety catch.

With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment.

Secure surfaces together with these padlockable latches; built-in springs withstand vibration better than other latches.

Secure cases, toolboxes, and other containers—these locks reach around outside corners to draw two surfaces together.

Close and open these roller latches with a push—there's no need for a handle.

Also known as bullet catches, these latches have a spring-loaded ball that grabs and holds the strike plate to keep doors shut.

Their spring-loaded design withstands vibration, rattling, and shaking better than other push-to-close grab latches for a more secure hold.

Close and open these grab latches with a push—there's no need for a handle.

Their spring-loaded design withstands vibration, rattling, and shaking better than other face-mount push-to-close latches for a more secure hold.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

Also known as rotary latches, these compensate for door misalignment when closing and then firmly grip the strike bolt for a secure hold.

Lock the nose into the retracted position by pulling the handle and rotating it 90°.

Lock the nose into the retracted position by pulling the ring and rotating it 90°.

Retract the nose by pulling the knob.

Quickly align, join, or hold machine components in place in food, pharmaceutical, and other sanitary environments. Pulling the plunger knob and twisting it 90° will lock the nose into its retracted position.

Thread onto machinery or attach a knob or handle to the threaded spindle.

A T-handle makes these spring plungers easy to grip.

An L-handle takes up less space than a T-handle.

A quarter turn of the handle locks these plungers in the retracted position. The smooth ball handle is easy to grip and won't catch on other parts.

Two holes in the plate allow these plungers to be mounted to a flat surface.

Use an arbor press or similar pressure tool to install these spring plungers into a panel.

Lock the nose in the retracted position by pulling the knob and rotating it 90°.

Press these catches into a hole.

Noses are up to four times longer than standard long-nose press-fit spring plungers.

Fasten from the nose end with a wrench for more torque than slotted long-nose spring plungers.

Slotted on both ends for installation with a screwdriver.

The flangeless design allows these spring plungers to mount flush with a surface.

Install these spring plungers with a screwdriver—they're slotted on one or both ends.

These hinges without holes are spring loaded—pull the handle to retract the pin and disconnect a door; release the handle and the pin snaps back.