Quickly position these sockets on square fasteners.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

These short sockets fit spaces where height clearance is limited.

Pivot the head to access fasteners from an angle.

These sockets fit the nuts found on water and gas valves.

The six lobes of the External Torx-Plus drive are flattened at the top to maximize their grip on fasteners, which keeps these sockets from slipping off during high-torque installations.

Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet ASTM F1505-01 and IEC 60900.

The short bit on these sockets fits in spaces where height clearance is limited.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

Extra-long bits allow access to hard-to-reach fasteners.

These sockets are also known as pin-in-hex or pin-in-socket bits.

Turn the knob to adjust the jaws and fit a range of fastener sizes.

Make maximum contact with all sides of a fastener to reduce slipping. These sockets are also known as torque adapters.

Pivot the head to access fasteners from an angle.

A magnet holds the fastener securely enough to drive self-tapping screws.

With a smaller OD than standard sockets, these fit between tightly spaced fasteners.

Tighten or loosen nuts and bolts without damaging the finish.

Quickly position these sockets on square fasteners.

The 12-point shape quickly positions on hex fasteners.

Pivot the head to access fasteners from an angle.

Designed to remove and install dual wheels on trucks and trailers, these sockets have a hex recess for accessing lug nuts and a square recess to turn the threaded shafts found on inner wheels.

A magnet holds the fastener securely enough to drive self-tapping screws.

Push the square drive through the adapter to change size.

Turn sockets with a bit screwdriver.

Attach one of these adapters to a socket to turn it with an open-end or box wrench.

Made of aluminum-bronze, these extensions satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Bend these extensions around obstructions to turn hard-to-reach fasteners.

The square drive has a rounded shape that allows the extension to pivot inside the socket opening and turn it from an angle.

Adapters are set to a specific torque and cannot be adjusted.

Fit these adapters between your wrench and socket to enable finger tightening.

Pivot the head to access fasteners from an angle.

Bend these extensions around obstructions to access hard-to-reach fasteners.

A magnet holds the socket, making changes quicker.

Lock your socket into the extension to prevent accidental disengagement.

Pull the collar to quickly attach and remove sockets.

Suitable for occasional maintenance work, these sets are imported.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

Suitable for occasional maintenance work, these sets are imported.

Grip the indentations around the outside of tri-groove fasteners.

The short bit on these sockets fits in spaces where height clearance is limited.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

Keep a convenient mix of hex, Torx, Phillips, and slotted bit sockets on hand.

These sockets are also known as pin-in-Torx bits.

These sockets are also known as pin-in-hex or pin-in-socket bits.

Make maximum contact on all sides of a fastener to reduce slipping. These sockets are also known as torque adapters.

The opening shape makes more contact with fasteners for a better grip than standard open-end sockets. Also known as flare-nut or line wrench sockets, they're often used with flared tube fittings and fuel and hydraulic lines.

Lock your socket into the extension to prevent accidental disengagement..

Convert from one square drive size to another.

Lock your socket into the extension to prevent accidental disengagement.

Pivot the head to access fasteners from an angle.

Attach to your socket for a longer reach.

Magnets hold sockets securely in place.

Bend or cut these organizers to fit your tool box or cabinet.

Move the sliding clips to any position along the rail to hold a variety of sockets.

The rail is smooth plastic so the clips move more easily than on steel-rail organizers.

No need to pull the socket off the tool—push a button to release.

Made of beryllium copper, these wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.