Component Component |
|---|
|
Blade Material Blade Material |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Manufacturer Model Number Manufacturer Model Number |
|---|
Combination Squares
Replace your try square, miter square, depth gauge, marking gauge, 90° level, ruler, and scriber with one tool. Blades labeled with numeric increments that are less than 1" are quick-reading. All have wear-resistant etched markings.
Square head checks 90° angles.
Center head identifies the center on pipes, rods, and shafts.
Protractor head measures angles.
Angle finder measures any angle from 0° to 90° and has a chart to convert angle to pitch.
Blade with Square Head with Built-in Level
Inch/Metric
Blade | Graduation | Plastic Head | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Blade Lg. | Front Graduation Marks (Numeric Increments) | Back Graduation Marks (Numeric Increments) | Wd. | Thick. | Material | Color | Color | Mark Style | Head Lg. | Each | |
Inch/Metric | |||||||||||
| 12"/304mm | 32nds (8/32"), Millimeters (10 mm) | Millimeters (10 mm), 16ths (1") | 1" | 3/32" | Stainless Steel | Silver | Black | Etched | 4 9/16" | 000000 | 00000 |
Blade with Square Head with Built-in Level and Scriber
Inch
Inch/Metric
Metric
Blade | Graduation | Zinc Head | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Blade Lg. | Front Graduation Marks (Numeric Increments) | Back Graduation Marks (Numeric Increments) | Wd. | Thick. | Material | Color | Color | Mark Style | Head Lg. | Each | |
Inch | |||||||||||
| 6" | 16ths (1"), 32nds (1") | 8ths (1"), 16ths (1") | 13/16" | 5/64" | Stainless Steel | Silver | Black | Etched | 3 11/16" | 000000 | 000000 |
| 12" | 16ths (1"), 32nds (1") | 8ths (1"), 16ths (1") | 1" | 3/32" | Stainless Steel | Silver | Black | Etched | 4 5/8" | 000000 | 00000 |
| 16" | 16ths (1"), 32nds (1") | 8ths (1"), 16ths (1") | 1" | 3/32" | Stainless Steel | Silver | Black | Etched | 4 5/8" | 000000 | 00000 |
Inch/Metric | |||||||||||
| 6", 150mm | 32nds (8/32"), Millimeters (10 mm) | Millimeters (10 mm), 16ths (1") | 13/16" | 5/64" | Stainless Steel | Silver | Black | Etched | 3 11/16" | 00000000 | 00000 |
| 12", 300mm | 32nds (8/32"), Millimeters (10 mm) | Millimeters (10 mm), 16ths (1") | 1" | 3/32" | Stainless Steel | Silver | Black | Etched | 4 5/8" | 00000000 | 00000 |
| 16", 400mm | 32nds (8/32"), Millimeters (10 mm) | Millimeters (10 mm), 16ths (1") | 1" | 3/32" | Stainless Steel | Silver | Black | Etched | 4 5/8" | 00000000 | 00000 |
Metric | |||||||||||
| 150mm | Millimeters (10 mm), Millimeters (10 mm) | Millimeters (10 mm), Millimeters (10 mm) | 13/16" | 5/64" | Stainless Steel | Silver | Black | Etched | 3 11/16" | 0000000 | 00000 |
| 300mm | Millimeters (10 mm), Millimeters (10 mm) | Millimeters (10 mm), Millimeters (10 mm) | 1" | 3/32" | Stainless Steel | Silver | Black | Etched | 4 5/8" | 0000000 | 00000 |
| 400mm | Millimeters (10 mm), Millimeters (10 mm) | Millimeters (10 mm), Millimeters (10 mm) | 1" | 3/32" | Stainless Steel | Silver | Black | Etched | 4 5/8" | 0000000 | 00000 |
Blade with Square Head, Angle Finder, and Scriber
Inch/Metric
Blade | Graduation | Zinc Head | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blade Lg. | Angle Finder Angle Measuring Range | Front Graduation Marks (Numeric Increments) | Back Graduation Marks (Numeric Increments) | Wd. | Thick. | Material | Color | Color | Mark Style | Head Lg. | Each | |
Inch/Metric | ||||||||||||
| 12"/300mm | 0°-90° | Millimeters (10 mm), 32nds (4/32") | Millimeters (10 mm), 16ths (1") | 1" | 5/64" | Steel | Silver | Black | Etched | 4" | 0000000 | 000000 |
Blade with Square Head with Built-in Level, Center Head, Reversible Protractor Head with Built-in Level, and Scriber
Inch/Metric
Blade | Graduation | Aluminum Heads | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Blade Lg. | Front Graduation Marks (Numeric Increments) | Back Graduation Marks (Numeric Increments) | Wd. | Thick. | Material | Color | Color | Mark Style | Head Lg. | Each | |
Inch/Metric | |||||||||||
| 12"/300mm | Millimeters (10 mm), 32nds (4/32") | Millimeters (10 mm), 16ths (1") | 1" | 3/32" | Steel | Silver | Black | Etched | 4 1/4" | 000000 | 000000 |
Starrett High-Accuracy Combination Squares
Replace your try square, miter square, depth gauge, height gauge, center-point finder, and level. The blade on these squares meets Fed. Spec. GGG-R-791H, which establishes uniform standards for accuracy, graduations, and size. Blades are labeled with numeric increments that are less than 1" for quick reading. All have wear-resistant etched markings.
Square head checks 90° angles. Center head identifies the center on pipes, rods, and shafts. Protractor head measures angles.
Satin-chrome blade finish is corrosion resistant and reduces glare. Hardened-steel heads are more durable and last longer than cast iron heads.
Blade with Square Head
Inch
Blade | Graduation | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blade Lg. | Front Grad. Marks (Increments) | Back Grad. Marks (Increments) | Accuracy | Wd. | Thick. | Material | Color | Color | Mark Style | Head Lg. | Each | |
Cast Iron Head | ||||||||||||
Inch | ||||||||||||
| 4" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.002" to +0.004" | 5/8" | 1/16" | Satin-Chrome Steel | Silver | Black | Etched | 2 1/4" | 0000000 | 000000 |
Hardened Steel Head | ||||||||||||
Inch | ||||||||||||
| 4" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.002" to +0.004" | 5/8" | 1/16" | Satin-Chrome Steel | Silver | Black | Etched | 2 1/4" | 0000000 | 000000 |
| Replacement Lockbolt for Square and Center Heads | 0000000 | Each | 000000 |
Blade with Square Head and Center Head
Inch
Blade | Graduation | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blade Lg. | Front Grad. Marks (Increments) | Back Grad. Marks (Increments) | Accuracy | Wd. | Thick. | Material | Color | Color | Mark Style | Head Lg. | Each | |
Cast Iron Heads | ||||||||||||
Inch | ||||||||||||
| 4" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.002" to +0.004" | 5/8" | 1/16" | Satin-Chrome Steel | Silver | Black | Etched | 2 1/4" | 0000000 | 0000000 |
Hardened Steel Heads | ||||||||||||
Inch | ||||||||||||
| 4" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.002" to +0.004" | 5/8" | 1/16" | Satin-Chrome Steel | Silver | Black | Etched | 2 1/4" | 0000000 | 000000 |
| Replacement Lockbolt for Square and Center Heads | 0000000 | Each | 000000 |
Blade with Square Head with Built-in Level and Scriber
Inch
Inch/Metric
Blade | Graduation | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blade Lg. | Front Grad. Marks (Increments) | Back Grad. Marks (Increments) | Accuracy | Wd. | Thick. | Material | Color | Color | Mark Style | Head Lg. | Each | |
Cast Iron Head | ||||||||||||
Inch | ||||||||||||
| 6" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.002" to +0.004" | 3/4" | 5/64" | Steel | Silver | Black | Etched | 2 13/32" | 0000000 | 000000 |
| 6" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.002" to +0.004" | 3/4" | 5/64" | Satin-Chrome Steel | Silver | Black | Etched | 2 13/32" | 0000000 | 000000 |
| 6" | 32nds (4/32"), 64ths (8/64") | 50ths (1/10"), 100ths (1/10") | -0.002" to +0.004" | 3/4" | 5/64" | Satin-Chrome Steel | Silver | Black | Etched | 2 13/32" | 0000000 | 000000 |
| 12" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.0035" to +0.005" | 1" | 3/32" | Steel | Silver | Black | Etched | 4 1/2" | 0000000 | 00000 |
| 12" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.0035" to +0.005" | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 4 1/2" | 0000000 | 000000 |
| 12" | 32nds (4/32"), 64ths (8/64") | 50ths (1/10"), 100ths (1/10") | -0.0035" to +0.005" | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 4 1/2" | 0000000 | 000000 |
| 18" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.0035" to +0.006" | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 4 1/2" | 0000000 | 000000 |
| 24" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.0035" to +0.007" | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 4 1/2" | 0000000 | 000000 |
Inch/Metric | ||||||||||||
| 11 3/4"/300mm | 1/2 mm (10 mm), 32nds (4/32") | Millimeters (10 mm), 64ths (8/64") | -0.0035" to +0.005"/ -0.09 mm to +0.15 mm | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 4 1/2" | 0000000 | 000000 |
| 23 1/2"/600mm | 1/2 mm (10 mm), 32nds (4/32") | Millimeters (10 mm), 64ths (8/64") | -0.0035" to +0.007"/ -0.11 mm to +0.25 mm | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 4 1/2" | 0000000 | 000000 |
Hardened Steel Head | ||||||||||||
Inch | ||||||||||||
| 6" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.002" to +0.004" | 3/4" | 5/64" | Satin-Chrome Steel | Silver | Black | Etched | 2 13/32" | 0000000 | 000000 |
| 6" | 32nds (4/32"), 64ths (8/64") | 50ths (1/10"), 100ths (1/10") | -0.002" to +0.004" | 3/4" | 5/64" | Satin-Chrome Steel | Silver | Black | Etched | 2 13/32" | 0000000 | 000000 |
| 12" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.0035" to +0.005" | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 3 5/8" | 0000000 | 000000 |
| 12" | 32nds (4/32"), 64ths (8/64") | 50ths (1/10"), 100ths (1/10") | -0.0035" to +0.005" | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 3 5/8" | 0000000 | 000000 |
| 18" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.0035" to +0.006" | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 3 5/8" | 0000000 | 000000 |
| 24" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.0035" to +0.007" | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 3 5/8" | 0000000 | 000000 |
| 24" | 32nds (4/32"), 64ths (8/64") | 50ths (1/10"), 100ths (1/10") | -0.0035" to +0.007" | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 3 5/8" | 0000000 | 000000 |
Inch/Metric | ||||||||||||
| 11 3/4"/300mm | 1/2 mm (10 mm), 32nds (4/32") | Millimeters (10 mm), 64ths (8/64") | -0.0035" to +0.005"/ -0.09 mm to +0.15 mm | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 3 5/8" | 0000000 | 000000 |
| 23 1/2"/600mm | 1/2 mm (10 mm), 32nds (4/32") | Millimeters (10 mm), 64ths (8/64") | -0.0035" to +0.007"/ -0.11 mm to +0.25 mm | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 3 5/8" | 0000000 | 000000 |
Blade with Square Head with Built-in Level, Center Head, and Scriber
Inch
Blade | Graduation | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blade Lg. | Front Grad. Marks (Increments) | Back Grad. Marks (Increments) | Accuracy | Wd. | Thick. | Material | Color | Color | Mark Style | Head Lg. | Each | |
Cast Iron Heads | ||||||||||||
Inch | ||||||||||||
| 6" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.002" to +0.004" | 3/4" | 5/64" | Satin-Chrome Steel | Silver | Black | Etched | 2 13/32" | 0000000 | 0000000 |
| 12" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.0035" to +0.005" | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 4 1/2" | 0000000 | 000000 |
| 12" | 32nds (4/32"), 64ths (8/64") | 50ths (1/10"), 100ths (1/10") | -0.0035" to +0.005" | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 4 1/2" | 0000000 | 000000 |
| 18" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.0035" to +0.006" | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 4 1/2" | 0000000 | 000000 |
| 24" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.0035" to +0.007" | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 4 1/2" | 0000000 | 000000 |
Hardened Steel Heads | ||||||||||||
Inch | ||||||||||||
| 6" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.002" to +0.004" | 3/4" | 5/64" | Satin-Chrome Steel | Silver | Black | Etched | 2 13/32" | 0000000 | 000000 |
| 12" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.0035" to +0.005" | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 3 5/8" | 0000000 | 000000 |
| 12" | 32nds (4/32"), 64ths (8/64") | 50ths (1/10"), 100ths (1/10") | -0.0035" to +0.005" | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 3 5/8" | 0000000 | 000000 |
| 18" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.0035" to +0.006" | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 3 5/8" | 0000000 | 000000 |
| 24" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.0035" to +0.007" | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 3 5/8" | 0000000 | 000000 |
Blade with Square Head with Built-in Level, Center Head, Protractor Head, and Scriber
Inch
Blade | Graduation | Cast Iron Heads | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blade Lg. | Front Grad. Marks (Increments) | Back Grad. Marks (Increments) | Accuracy | Wd. | Thick. | Material | Color | Color | Mark Style | Head Lg. | Each | |
Inch | ||||||||||||
| 12" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.0035" to +0.005" | 1" | 3/32" | Steel | Silver | Black | Etched | 4 1/2" | 0000000 | 0000000 |
| 18" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.0035" to +0.006" | 1" | 3/32" | Steel | Silver | Black | Etched | 4 1/2" | 0000000 | 000000 |
| 24" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.0035" to +0.007" | 1" | 3/32" | Steel | Silver | Black | Etched | 4 1/2" | 0000000 | 000000 |
| Replacement Lockbolt for Square, Center, and Protractor Heads | 0000000 | Each | 00000 |
Blade with Square Head with Built-in Level, Center Head, Reversible Protractor Head, and Scriber
| Inch |
Inch/Metric |
Blade | Graduation | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blade Lg. | Front Grad. Marks (Increments) | Back Grad. Marks (Increments) | Accuracy | Wd. | Thick. | Material | Color | Color | Mark Style | Head Lg. | Each | |
Cast Iron Heads | ||||||||||||
Inch | ||||||||||||
| 12" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.0035" to +0.005" | 1" | 3/32" | Steel | Silver | Black | Etched | 4 1/2" | 0000000 | 0000000 |
| 12" | 32nds (4/32"), 64ths (8/64") | 50ths (1/10"), 100ths (1/10") | -0.0035" to +0.005" | 1" | 3/32" | Steel | Silver | Black | Etched | 4 1/2" | 0000000 | 000000 |
| 18" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.0035" to +0.006" | 1" | 3/32" | Steel | Silver | Black | Etched | 4 1/2" | 0000000 | 000000 |
| 24" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.0035" to +0.007" | 1" | 3/32" | Steel | Silver | Black | Etched | 4 1/2" | 0000000 | 000000 |
Inch/Metric | ||||||||||||
| 11 3/4"/300mm | 1/2 mm (10 mm), 32nds (4/32") | Millimeters (10 mm), 64ths (8/64") | -0.0035" to +0.005"/-0.09 mm to +0.15 mm | 1" | 3/32" | Steel | Silver | Black | Etched | 4 1/2" | 0000000 | 000000 |
| 23 1/2"/600mm | 1/2 mm (10 mm), 32nds (4/32") | Millimeters (10 mm), 64ths (8/64") | -0.0035" to +0.007"/-0.11 mm to +0.25 mm | 1" | 3/32" | Steel | Silver | Black | Etched | 4 1/2" | 0000000 | 000000 |
Hardened Steel Heads | ||||||||||||
Inch | ||||||||||||
| 12" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.0035" to +0.005" | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 3 5/8" | 0000000 | 000000 |
| 12" | 32nds (4/32"), 64ths (8/64") | 50ths (1/10"), 100ths (1/10") | -0.0035" to +0.005" | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 3 5/8" | 0000000 | 000000 |
| 18" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.0035" to +0.006" | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 3 5/8" | 0000000 | 000000 |
| 18" | 32nds (4/32"), 64ths (8/64") | 50ths (1/10"), 100ths (1/10") | -0.0035" to +0.006" | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 3 5/8" | 0000000 | 000000 |
| 24" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.0035" to +0.007" | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 3 5/8" | 0000000 | 000000 |
| 24" | 32nds (4/32"), 64ths (8/64") | 50ths (1/10"), 100ths (1/10") | -0.0035" to +0.007" | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 3 5/8" | 0000000 | 000000 |
Inch/Metric | ||||||||||||
| 11 3/4"/300mm | 1/2 mm (10 mm), 32nds (4/32") | Millimeters (10 mm), 64ths (8/64") | -0.0035" to +0.005"/-0.09 mm to +0.15 mm | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 3 5/8" | 0000000 | 000000 |
| 23 1/2"/600mm | 1/2 mm (10 mm), 32nds (4/32") | Millimeters (10 mm), 64ths (8/64") | -0.0035" to +0.007"/-0.11 mm to +0.25 mm | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 3 5/8" | 0000000 | 000000 |
| Replacement Lockbolt for Square, Center, and Protractor Heads | 0000000 | Each | 00000 |
High-Accuracy Combination Squares
Use these squares in place of your try square, miter square, depth gauge, height gauge, center-point finder, and level. Blades are labeled with numeric increments that are less than 1" for quick reading. All have a corrosion-resistant satin-chrome finish that reduces glare and wear-resistant etched markings.
Square head checks 90° angles. Center head identifies the center on pipes, rods, and shafts. Protractor head measures angles.
Hardened cast iron heads are more durable and last longer than cast iron heads.
Blade with Square Head with Built-in Level and Scriber
Inch
Blade | Graduation | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blade Lg. | Front Grad. Marks (Increments) | Back Grad. Marks (Increments) | Accuracy | Wd. | Thick. | Material | Color | Color | Mark Style | Head Lg. | Each | |
Cast Iron Head | ||||||||||||
Inch | ||||||||||||
| 12" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.0025" to +0.0025" | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 4 1/2" | 00000000 | 000000 |
Hardened Cast Iron Head | ||||||||||||
Inch | ||||||||||||
| 12" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.0025" to +0.0025" | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 4 1/2" | 00000000 | 000000 |
| Replacement Lockbolt | 00000000 | Each | 00000 |
Blade with Square Head with Built-in Level, Center Head, and Scriber
Inch
Blade | Graduation | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blade Lg. | Front Grad. Marks (Increments) | Back Grad. Marks (Increments) | Accuracy | Wd. | Thick. | Material | Color | Color | Mark Style | Head Lg. | Each | |
Cast Iron Heads | ||||||||||||
| 12" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.0025" to +0.0025" | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 4 1/2" | 00000000 | 0000000 |
Hardened Cast Iron Heads | ||||||||||||
| 12" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.0025" to +0.0025" | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 4 1/2" | 00000000 | 000000 |
| Replacement Lockbolt | 00000000 | Each | 00000 |
Blade with Square Head with Built-in Level, Center Head, Reversible Protractor Head, and Scriber
Inch
Blade | Graduation | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blade Lg. | Front Grad. Marks (Increments) | Back Grad. Marks (Increments) | Accuracy | Wd. | Thick. | Material | Color | Color | Mark Style | Head Lg. | Each | |
Cast Iron Heads | ||||||||||||
Inch | ||||||||||||
| 12" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.0025" to +0.0025" | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 4 1/2" | 00000000 | 0000000 |
Hardened Cast Iron Heads | ||||||||||||
Inch | ||||||||||||
| 12" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.0025" to +0.0025" | 1" | 3/32" | Satin-Chrome Steel | Silver | Black | Etched | 4 1/2" | 00000000 | 000000 |
| Replacement Lockbolt | 00000000 | Each | 00000 |
Scratch-Resistant High-Accuracy Combination Squares
A titanium coating protects the blade against scratches and wear. Use these squares to replace your try square, miter square, depth gauge, height gauge, center-point finder, and level. Blades are labeled with numeric increments that are less than 1" for quick reading. All have wear-resistant etched markings.
Square head checks 90° angles. Center head identifies the center on pipes, rods, and shafts. Protractor head measures angles.
Blade with Square Head with Built-in Level and Scriber
Inch
Blade | Graduation | Cast Iron Head | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blade Lg. | Front Graduation Marks (Numeric Increments) | Back Graduation Marks (Numeric Increments) | Accuracy | Wd. | Thick. | Material | Color | Color | Mark Style | Head Lg. | Each | |
Inch | ||||||||||||
| 12" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.002" to +0.002" | 1" | 3/32" | Titanium-Coated Steel | Gold | Black | Etched | 4 1/2" | 00000000 | 0000000 |
Blade with Square Head with Built-in Level, Center Head, Protractor Head, and Scriber
Inch
Blade | Graduation | Cast Iron Heads | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blade Lg. | Front Graduation Marks (Numeric Increments) | Back Graduation Marks (Numeric Increments) | Accuracy | Wd. | Thick. | Material | Color | Color | Mark Style | Head Lg. | Each | |
Inch | ||||||||||||
| 12" | 32nds (4/32"), 64ths (8/64") | 8ths (1"), 16ths (1") | -0.002" to +0.002" | 1" | 3/32" | Titanium-Coated Steel | Gold | Black | Etched | 4 1/2" | 00000000 | 0000000 |