These fittings seal out liquids when connecting liquid-tight flexible metal conduit to a knockout in an outlet box or enclosure.

Attach conduit to a knockout in an outlet box or enclosure.

Made of stainless steel, these grips have excellent corrosion resistance.

Made of stainless steel, these grips have excellent corrosion resistance.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys and the stainless steel wire rope withstands outdoor and washdown applications.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys and the stainless steel wire rope withstands outdoor and washdown applications.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys and the stainless steel wire rope withstands outdoor and washdown applications.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

This braided wire has a stiff construction for use as bracing and guy wires.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

This wire rope provides a good balance of abrasion resistance and flexibility.

More wires per strand than other wire rope gives this wire rope the flexibility required for repeat bending over drums and pulleys.

This wire rope provides a good balance of abrasion resistance and flexibility.

A thimble on the inside of the loop protects the wire rope from fraying.

A large opening combined with an easy to open latch allows for quick and easy attachment to links and rings.

Secure a ball with shank to a flat surface.

The swivel fork allows the lanyard to rotate freely.

These clamps have a forged fabrication and are reliable in critical applications. They are not for making slings. These must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end. They’re also known as wire rope clips.

These compression sleeves are designed to meet lifting specifications.

Also known as standard-pattern thimbles, these provide better protection against fraying than light duty thimbles.

Smooth rounded edges and an endless design prevent snags.

Install these clevis-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Add a mounting-plate to wire rope without having to fray the rope or use a compression tool.

Add an eye-end to wire rope without having to fray the rope or use a compression tool.

Also known as socket-end swage fittings, install these ball-with-shank-end fittings with a roller swage press for a strong, permanent hold.

Also known as socket-end swage fittings, install these eye-end fittings with a roller swage press for a strong, permanent hold.

Compress the thin shank wall with a hand tool to attach these light duty stud-end fittings. They are also known as hand swage fittings.

Compress the thin shank wall with a hand tool to attach these light duty eye-end fittings. They are also known as hand swage fittings.

For use in washdown environments, this wire rope has better corrosion resistance than the galvanized steel wire rope.

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

A lip on the shackle keeps the screw from falling out when loosened.

For use in low-vibration applications where the shackle remains stationary.

Indentations in the shackle body hold the head of the pin in place once fastened.

A lip on the shackle keeps the pin from falling out when loosened.

Attach a rope to the ring on the pin for remote release where access in limited. These shackes have a clevis end for making pivoting connections.

Limit rope and chain movement with the narrow end of these links and attach multiple connectors to the wide end.

Hammer the pin through the center to assemble these links. They’re also known as hammer locks and sling links.

The narrow end restricts the movement of rope and chain, and the wide end allows room to attach multiple connectors.

Flat sides allow webbing and strapping to lay flat, so they won't slide and bunch.

Strike the prongs with a ball peen hammer and they expand to hold the connecting link together.

Hang, pull, and secure loads. These rings are good for general non-lifting applications.

Lock by screwing the latch into the body.

A lock slides upward over the latch to lock. The latch opens outward to accept large diameters of rope.

Rotating for easy positioning before a load is applied, these have a latch to ensure that rope, chain, and fittings won't separate from the hook when the load slackens.

These swivel hooks have a latch that ensures rope, chain, and fittings won't separate from the hook when the load slackens.

Often used in binding and tie-down applications, these securely hold a single link of chain.

These kits fit most hooks with a drilled pinhole.

Use these kits with hooks that doin't have a pinhole.

Adjust the position of a fitting or an object under load and minimize twisting and knotting.

For easy positioning before a load is applied, these rotate to minimize twisting and knotting of rope and chain.

These rotate for easy positioning before a load is applied to minimize twisting and knotting of rope and chain.

Create fast connections with items, such as rope, chain, and straps.

For extra security, these have a latch that snaps back into place to secure your load.

One side is closed and the other is open.

Use these S-hooks for lifting applications.

The chain has flat links that fold back on themselves for maximum flexibility. Use the split ring on one end to hold tags and keys.

Bend this wire and it will stay put. It’s frequently used as tying wire and locking wire.

Bend this wire and it will stay in place. It's widely used as tying and locking wire.

Bend this wire and it will stay in place. It's commonly used as tying and locking wire.

Use the bore to mount these pulleys on a shaft. These pulleys are also known as sheaves.

Also known as sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.

Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.

Also known as snatch blocks, these open so it’s easier to feed the rope through the housing—a free rope end is not needed.

These versatile pullers are made of aluminum with stainless steel rope for corrosive environments. They give you the capacity of a winch in a portable tool. Wire rope is stronger than rope and webbing but not as bulky as chain.