About Brushes
More
Brushes with Shank for Flat Surfaces
The broad face quickly cleans large, flat areas. Remove light-to-medium rust and stains and small burs with these flexible-bristle brushes.
Stainless steel bristles won't leave behind debris that could cause rust on your workpiece.
Shank | Bristle | Each | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Brush Dia. | Dia. | Lg. | Dia. | Lg. | Style | Flexibility | Max. Speed, rpm | 1-11 | 12-Up | |
For Use With Drills, Grinders for Bits and Burs | ||||||||||
Stainless Steel Bristles—For Use On Stainless Steel, Aluminum, Brass, Bronze, Copper, Plastic | ||||||||||
| 5/8" | 1/8" | 1 1/2" | 0.005" | 1/4" | Crimped | Flexible | 37,000 | 0000000 | 00000 | 00000 |
| 1 3/4" | 1/4" | 3/4" | 0.006" | 1/2" | Crimped | Flexible | 13,000 | 0000000 | 00000 | 00000 |
| 1 3/4" | 1/4" | 1" | 0.012" | 3/4" | Crimped | Flexible | 13,000 | 0000000 | 00000 | 00000 |
| 2" | 1/4" | 3/4" | 0.008" | 5/8" | Crimped | Flexible | 10,500 | 0000000 | 00000 | 00000 |
| 2" | 1/4" | 3/4" | 0.010" | 5/8" | Crimped | Flexible | 10,500 | 0000000 | 00000 | 00000 |
| 2 1/2" | 1/4" | 3/4" | 0.008" | 5/8" | Crimped | Flexible | 4,500 | 0000000 | 00000 | 00000 |
| 2 1/2" | 1/4" | 3/4" | 0.010" | 5/8" | Crimped | Flexible | 4,500 | 0000000 | 00000 | 00000 |
Low-Scratch Brushes with Shank for Flat Surfaces
Use these flexible-bristle brushes to remove light-to-medium rust and stains and small burs from delicate surfaces. The bristles won’t leave behind debris that could cause rust on your workpiece.
Goat hair and horsehair bristles are good for sweeping away dust or applying lubricants and polishing compounds.
Shank | Bristle | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Brush Dia. | Dia. | Lg. | Dia. | Lg. | Style | Flexibility | Max. Speed, rpm | Each | |
For Use With Drills, Grinders for Bits and Burs | |||||||||
Brass Bristles—For Use On Stainless Steel, Aluminum, Brass, Bronze, Copper, Plastic | |||||||||
| 5/8" | 1/8" | 1 1/2" | 0.005" | 1/4" | Crimped | Flexible | 37,000 | 0000000 | 00000 |
| 1 3/4" | 1/4" | 1" | 0.006" | 3/4" | Crimped | Flexible | 10,500 | 0000000 | 00000 |
| 1 3/4" | 1/4" | 1" | 0.010" | 3/4" | Crimped | Flexible | 10,500 | 0000000 | 00000 |
| 1 3/4" | 1/4" | 1" | 0.014" | 3/4" | Crimped | Flexible | 10,500 | 0000000 | 00000 |
| 2" | 1/4" | 1" | 0.006" | 3/4" | Crimped | Flexible | 10,500 | 0000000 | 00000 |
| 2" | 1/4" | 1" | 0.010" | 3/4" | Crimped | Flexible | 10,500 | 0000000 | 00000 |
| 2" | 1/4" | 1" | 0.014" | 3/4" | Crimped | Flexible | 10,500 | 0000000 | 00000 |
| 2 3/4" | 1/4" | 1" | 0.006" | 3/4" | Crimped | Flexible | 8,000 | 0000000 | 00000 |
| 2 3/4" | 1/4" | 1" | 0.010" | 3/4" | Crimped | Flexible | 8,000 | 0000000 | 00000 |
| 2 3/4" | 1/4" | 1" | 0.014" | 3/4" | Crimped | Flexible | 8,000 | 0000000 | 00000 |
Goat Hair Bristles—For Use On Steel, Stainless Steel, Titanium, Brass, Bronze, Copper, Plastic | |||||||||
| 1" | 1/8" | 1 1/2" | __ | 1/2" | Straight | Flexible | 25,000 | 0000000 | 0000 |
Horsehair Bristles—For Use On Steel, Stainless Steel, Titanium, Brass, Bronze, Copper, Plastic | |||||||||
| 9/16" | 1/8" | 1 1/2" | __ | 1/4" | Straight | Flexible | 37,000 | 0000000 | 0000 |
| 1" | 1/8" | 1 1/2" | __ | 1/2" | Straight | Flexible | 25,000 | 0000000 | 0000 |
Cup Sanding Brushes with Shank for Flat Surfaces
Abrasive grains are embedded in the entire length of the bristles so the sides act like flexible files. These brushes remove workpiece material as well as surface contamination in a single step. The nylon bristles won’t leave behind debris that could cause rust on your workpiece and are recommended for use around acids and alkalies.
Shank | Bristle | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Brush Dia. | Dia. | Lg. | Lg. | Style | Flexibility | Max. Speed, rpm | Abrasive Material | Choose a Grit | Each | |
For Use With Drills, Grinders for Bits and Burs | ||||||||||
Nylon Plastic Bristles—For Use On Steel, Stainless Steel, Titanium, Brass, Bronze, Copper | ||||||||||
| 2 3/4" | 1/4" | 7/8" | 1 1/4" | Crimped | Flexible | 6,000 | Silicon Carbide | 120 (For Smooth Finish) | 00000000 | 000000 |
Nylon Plastic Bristles—For Use On Steel, Stainless Steel, Titanium, Brass, Bronze, Copper, Plastic | ||||||||||
| 9/16" | 1/8" | 1 1/2" | 3/8" | Crimped | Flexible | 6,000 | Aluminum Oxide | 600 (For Polished Finish) | 00000000 | 0000 |
| 2" | 1/4" | 1 1/8" | 7/8" | Crimped | Flexible | 5,000 | Silicon Carbide | 00000000 | 00000 | |
| 3" | 1/4" | 1 1/8" | 7/8" | Crimped | Flexible | 5,000 | Silicon Carbide | 180 (For Smooth Finish) | 00000000 | 00000 |
Aggressive-Cleaning Brushes for Flat Surfaces
Rigid, partially twisted bristles handle tasks such as edge rounding and removing weld slag, heavy surface contamination, and large burs. Also known as knot-wire brushes.
Stainless steel bristles won't leave behind debris that could cause rust on your workpiece.
Bristle | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Brush Dia. | Arbor Hole Thread Size | Arbor Hole Thread Pitch | Dia. | Lg. | Style | Flexibility | Max. Speed, rpm | Each | |
For Use With Angle Grinders | |||||||||
Stainless Steel Bristles—For Use On Stainless Steel, Aluminum, Brass, Bronze, Copper, Plastic | |||||||||
| 2 3/4" | 3/8"-24 | __ | 0.020" | 1" | Twisted | Rigid | 14,000 | 0000000 | 000000 |
| 2 3/4" | 1/2"-13 | __ | 0.020" | 1" | Twisted | Rigid | 14,000 | 0000000 | 00000 |
| 2 3/4" | 5/8"-11 | __ | 0.020" | 1" | Twisted | Rigid | 14,000 | 0000000 | 00000 |
| 2 3/4" | M10 | 1.25 mm | 0.020" | 1" | Twisted | Rigid | 14,000 | 0000000 | 00000 |
| 3 1/2" | 3/8"-24 | __ | 0.023" | 7/8" | Twisted | Rigid | 13,000 | 0000000 | 00000 |
| 3 1/2" | 5/8"-11 | __ | 0.023" | 7/8" | Twisted | Rigid | 13,000 | 0000000 | 00000 |
| 4" | 5/8"-11 | __ | 0.014" | 1 1/4" | Twisted | Rigid | 10,200 | 0000000 | 000000 |
| 4" | 5/8"-11 | __ | 0.023" | 1 1/4" | Twisted | Rigid | 10,200 | 0000000 | 000000 |
| 6" | 5/8"-11 | __ | 0.014" | 1 3/8" | Twisted | Rigid | 6,600 | 0000000 | 000000 |
| 6" | 5/8"-11 | __ | 0.023" | 1 3/8" | Twisted | Rigid | 6,600 | 0000000 | 000000 |
Long-Lasting Aggressive-Cleaning Brushes for Flat Surfaces
The rigid bristles are partially twisted in alternating directions, which prevents them from separating. Use these brushes for tasks such as edge rounding and removing weld slag, heavy surface contamination, and large burs. Also known as knot-wire brushes.
Stainless steel bristles won't leave behind debris that could cause rust on your workpiece.
Bristle | ||||||||
|---|---|---|---|---|---|---|---|---|
| Brush Dia. | Arbor Hole Thread Size | Dia. | Lg. | Style | Flexibility | Max. Speed, rpm | Each | |
For Use With Angle Grinders | ||||||||
Stainless Steel Bristles—For Use On Stainless Steel, Aluminum, Brass, Bronze, Copper, Plastic | ||||||||
| 2 3/4" | 5/8"-11 | 0.020" | 7/8" | Twisted | Rigid | 14,000 | 0000000 | 000000 |
| 4" | 5/8"-11 | 0.023" | 1 1/4" | Twisted | Rigid | 9,000 | 0000000 | 000000 |
Nonsparking Aggressive-Cleaning Brushes for Flat Surfaces
Made of phosphorus bronze that is Factory Mutual approved, the bristles on these brushes inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Use for tasks such as edge rounding and removing weld slag, heavy surface contamination, and large burs. Also known as knot-wire brushes.
Warning: Do not use in direct contact with acetylene.
Bristle | ||||||||
|---|---|---|---|---|---|---|---|---|
| Brush Dia. | Arbor Hole Thread Size | Dia. | Lg. | Style | Flexibility | Max. Speed, rpm | Each | |
For Use With Angle Grinders | ||||||||
Phosphorus Bronze Bristles—For Use On Steel, Stainless Steel, Titanium, Aluminum, Brass, Bronze, Copper | ||||||||
| 3" | 5/8"-11 | 0.020" | 1 1/8" | Twisted | Rigid | 12,500 | 000000 | 0000000 |
High-Coverage Aggressive-Cleaning Brushes for Flat Surfaces
Two rows of rigid bristles cover more surface area. These brushes have partially twisted bristles that handle tasks such as edge rounding and removing weld slag, heavy surface contamination, and large burs. Also known as knot-wire brushes.
Stainless steel bristles won't leave behind debris that could cause rust on your workpiece.
Bristle | ||||||||
|---|---|---|---|---|---|---|---|---|
| Brush Dia. | Arbor Hole Thread Size | Dia. | Lg. | Style | Flexibility | Max. Speed, rpm | Each | |
For Use With Angle Grinders | ||||||||
Stainless Steel Bristles—For Use On Stainless Steel, Aluminum, Brass, Bronze, Copper, Plastic | ||||||||
| 4" | 5/8"-11 | 0.020" | 1 1/4" | Twisted | Rigid | 9,000 | 0000000 | 0000000 |
| 6" | 5/8"-11 | 0.023" | 1 3/8" | Twisted | Rigid | 6,600 | 0000000 | 000000 |
Brushes for Flat Surfaces
Remove light-to-medium rust and stains and small burs with these flexible-bristle brushes.
Stainless steel bristles won't leave behind debris that could cause rust on your workpiece.
Bristle | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Brush Dia. | Arbor Hole Thread Size | Arbor Hole Thread Pitch | Dia. | Lg. | Style | Flexibility | Max. Speed, rpm | Each | |
For Use With Angle Grinders | |||||||||
Stainless Steel Bristles—For Use On Stainless Steel, Aluminum, Brass, Bronze, Copper, Plastic | |||||||||
| 3 1/2" | 5/8"-11 | __ | 0.010" | 1 1/8" | Crimped | Flexible | 9,000 | 0000000 | 000000 |
| 3 1/2" | 5/8"-11 | __ | 0.014" | 7/8" | Crimped | Flexible | 12,000 | 0000000 | 00000 |
| 3 1/2" | M10 | 1.25 mm | 0.014" | 7/8" | Crimped | Flexible | 12,000 | 0000000 | 00000 |
| 4" | 5/8"-11 | __ | 0.014" | 1 1/4" | Crimped | Flexible | 9,000 | 0000000 | 00000 |
| 4" | 5/8"-11 | __ | 0.020" | 1 3/8" | Crimped | Flexible | 10,200 | 0000000 | 00000 |
| 5" | 5/8"-11 | __ | 0.014" | 1 1/4" | Crimped | Flexible | 9,000 | 0000000 | 00000 |
| 6" | 5/8"-11 | __ | 0.020" | 1 1/2" | Crimped | Flexible | 7,000 | 0000000 | 00000 |
Nonsparking Brushes for Flat Surfaces
Made of phosphorus bronze that is Factory Mutual approved, the bristles on these brushes inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Use to remove light-to-medium rust and stains and small burs.
Warning: Do not use in direct contact with acetylene.
Bristle | ||||||||
|---|---|---|---|---|---|---|---|---|
| Brush Dia. | Arbor Hole Thread Size | Dia. | Lg. | Style | Flexibility | Max. Speed, rpm | Each | |
For Use With Angle Grinders | ||||||||
Phosphorus Bronze Bristles—For Use On Steel, Stainless Steel, Titanium, Aluminum, Brass, Bronze, Copper | ||||||||
| 3" | 5/8"-11 | 0.014" | 1" | Crimped | Flexible | 12,500 | 000000 | 0000000 |
Cup Sanding Brushes for Flat Surfaces
Abrasive grains are embedded in the entire length of the bristles so the sides act like flexible files. These brushes remove workpiece material as well as surface contamination in a single step. The nylon bristles won’t leave behind debris that could cause rust on your workpiece and are recommended for use around acids and alkalies.
Bristle | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Brush Dia. | Arbor Hole Thread Size | Lg. | Style | Flexibility | Max. Speed, rpm | Abrasive Material | Choose a Grit | Each | |
Nylon Plastic Bristles—For Use On Steel, Stainless Steel, Titanium, Brass, Bronze, Copper, Plastic | |||||||||
| 4" | 5/8"-11 | 1 1/2" | Crimped | Flexible | 6,000 | Silicon Carbide | 0000000 | 000000 | |
| 6" | 5/8"-11 | 1 1/2" | Crimped | Flexible | 6,000 | Silicon Carbide | 0000000 | 000000 | |
Low-Scratch Brushes for Flat Surfaces
Use these flexible-bristle brushes to remove light-to-medium rust and stains and small burs from delicate surfaces. The bristles won’t leave behind debris that could cause rust on your workpiece.
Bristle | ||||||||
|---|---|---|---|---|---|---|---|---|
| Brush Dia. | Arbor Hole Thread Size | Dia. | Lg. | Style | Flexibility | Max. Speed, rpm | Each | |
For Use With Angle Grinders | ||||||||
Brass Bristles—For Use On Stainless Steel, Aluminum, Brass, Bronze, Copper, Plastic | ||||||||
| 2 3/4" | 5/8"-11 | 0.014" | 3/4" | Crimped | Flexible | 12,500 | 0000000 | 000000 |
| 2 3/4" | 5/8"-11 | 0.014" | 7/8" | Twisted | Rigid | 12,500 | 00000000 | 00000 |
| 2 3/4" | 5/8"-11 | 0.020" | 3/4" | Crimped | Flexible | 12,500 | 0000000 | 00000 |
| 2 3/4" | 5/8"-11 | 0.020" | 7/8" | Twisted | Rigid | 12,500 | 00000000 | 00000 |
| 4" | 5/8"-11 | 0.010" | 1 1/4" | Crimped | Flexible | 9,000 | 0000000 | 00000 |
| 4" | 5/8"-11 | 0.014" | 1 1/4" | Crimped | Flexible | 9,000 | 0000000 | 00000 |
| 4" | 5/8"-11 | 0.020" | 1 1/4" | Crimped | Flexible | 9,000 | 0000000 | 00000 |
| 4" | 5/8"-11 | 0.020" | 1 1/4" | Twisted | Rigid | 7,000 | 00000000 | 000000 |
| 6" | 5/8"-11 | 0.014" | 1 5/8" | Crimped | Flexible | 6,000 | 0000000 | 000000 |
Brushes for Angles and Corners
Clean around edges, corners, and contours with these dish-shaped brushes. They have twisted bristles that handle tasks such as edge rounding and removing weld slag, heavy surface contamination, and large burs.
Stainless steel bristles won't leave behind debris that could cause rust on your workpiece.
Bristle | ||||||||
|---|---|---|---|---|---|---|---|---|
| Brush Dia. | Arbor Hole Thread Size | Dia. | Lg. | Style | Flexibility | Max. Speed, rpm | Each | |
For Use With Angle Grinders | ||||||||
Stainless Steel Bristles—For Use On Stainless Steel, Aluminum, Brass, Bronze, Copper, Plastic | ||||||||
| 4" | 3/8"-24 | 0.020" | 3/4" | Twisted | Rigid | 12,500 | 00000000 | 000000 |
| 4" | 1/2"-13 | 0.020" | 3/4" | Twisted | Rigid | 12,500 | 00000000 | 00000 |
| 4" | 5/8"-11 | 0.014" | 3/4" | Twisted | Rigid | 12,500 | 00000000 | 00000 |
| 4" | 5/8"-11 | 0.020" | 3/4" | Twisted | Rigid | 12,500 | 00000000 | 00000 |
| 4 1/2" | 5/8"-11 | 0.014" | 1" | Twisted | Rigid | 12,500 | 00000000 | 00000 |
| 4 1/2" | 5/8"-11 | 0.020" | 1" | Twisted | Rigid | 12,500 | 00000000 | 00000 |