Polished to either a brushed or mirror-like finish, this material is often used to fabricate decorative enclosures and industrial workstations.

Harder than our other 304 stainless steel, these thin sheets offer better wear resistance for use as a wrap, liner, or cover.

The textured surface hides fingerprints and dents. This material is widely used in decorative applications, such as partitions and handrails.

Able to withstand repeated stress and wear, 301 stainless steel has the strength required for applications such as springs and fasteners.

Widely used for fabricating fittings and fasteners, 303 stainless steel machines quickly without sticking to cutting tools.

One side of these sheets has a brushed finish with grain lines running in one direction to mask fingerprints.

This material is precision ground to offer tighter tolerances than standard 316 stainless steel.

These selector packs contain one 1-3/4"×3"×1/16" thick piece of 316 stainless steel in the following finishes: brushed #4, mirror-like #8, and unpolished.

Because these thin sheets are harder than our other 316 stainless steel, they offer better wear resistance. Use them as a wrap, liner, or cover.

Each piece is precision ground to offer tighter tolerances than standard 17-4 PH stainless steel.

As the most formable of all the PH-grade materials, 17-7 PH stainless steel is widely used in the aerospace industry for intricate parts. When hardened, this material strengthens to make it resist distortion.

13-8 PH stainless steel can be hardened at lower temperatures than other heat-treatable types of stainless steel. It is widely used for fittings, pins, and lock washers.

Precision ground on the top and bottom to a tight tolerance.

The addition of vanadium and carbon gives 420V stainless steel excellent wear resistance. It can replace tool steel in highly abrasive applications.

The width and thickness are oversized for finishing to your exact requirements.

440A stainless steel resists damage from impact and abrasion. It's often used for cutlery and valve components.

One of the most machinable types of stainless steel available, 416 contains sulfur for fast machining without clogging cutting tools. It's used for gears, screws, and shafts.

309/310 stainless steel has high levels of chromium and nickel to provide good corrosion resistance at elevated temperatures. It's often used in heat exchangers and furnaces.

Known for being one of the easiest types of aluminum to weld, 5052 is also recognized for its ability to resist salt water. It's widely used for the bodies of boats, buses, trucks, and trailers, as well as for chemical drums.

Made of 1000 series aluminum which is 99% pure, this aluminum offers superior formability, corrosion resistance, and electrical conductivity. It's frequently fabricated into raceways, decorative trim, and other parts where strength and hardness are not required.

Use this foil as a blanket to disperse heat evenly in high-vacuum systems, as well as in clean rooms and other controlled environments where dust and oil could jeopardize a system.

Containing 3% silicon, this electrical steel forms the laminated cores of electromagnetic devices to improve performance. It’s extremely thin, reducing energy loss for better overall efficiency.

Keep shim stock in a variety of thicknesses on hand with these sets. Cut into custom shapes to fit your application.

Level dies, plates, presses, and other machine tools—this shim tape conforms to curves and uneven surfaces.

Create a custom shim to fit your application.

Trap small particles in low-flow applications—these sheets have tiny holes and small open area.

Also known as bolting grade, this wire cloth has a large percentage of open area and ultra-thin wire to maintain flow. Use to sift and sort large quantities of dense nonabrasive materials.

Maximize flow when straining your liquid process lines—material passes more quickly through this wire cloth's rectangular openings than through other wire cloth.

Designed for use in food, pharmaceutical, and other sanitary environments, this precision wire cloth is sintered (fused together) to create a strong, smooth surface that’s free of crevices where contaminants can collect.

Also known as Dutch weave, this wire cloth has a tight weave that traps tiny particles and provides strength for use in high-pressure and high-flow applications.

Compare mesh size, rigidity, or construction with sample packs.