Material Material | Show |
---|
|
Mounting Style Mounting Style |
---|
![]() | ![]() |
Surface | Through Hole |
Width Width |
---|
|
|
|
Slide-Bolt Type Slide-Bolt Type |
---|
|
Gate Latch Type Gate Latch Type |
---|
|
Finish Finish |
---|
|
Bolt Adjustability Bolt Adjustability |
---|
|
Mounting Orientation Mounting Orientation |
---|
|
Pull Cord Hole Diameter Pull Cord Hole Diameter |
---|
|
Mounting Hole Style Mounting Hole Style |
---|
|
Push to close and pull up on the latch arm to open these padlockable latches. They are self-latching, meaning that a catch grabs and holds the strike plate to keep doors shut. All of these latches are reversible for left or right-hand mounting. The arm has a hole to add a pull cord or chain.
Fasten surface-mounted latches to the front of the gate and post, so the two pieces are parallel. Latches with 90° bolt are for gates that overlap the post when closed. Latches with straight bolt are for gates that close flush with the post.
Mount latches with a fixed bolt directly to the gate. These latches are quick to install and require less mounting space than adjustable-bolt latches, but are difficult to adjust once installed. Latches with an adjustable bolt have multiple mounting holes for the bolt, so you can change its alignment without moving the whole latch. Adjustable latches with a button are the easiest to adjust—depress a button to move the bolt instead of unscrewing it from the mounting plate.
The smooth finish on powder-coated steel latches protects the underlying steel from rust in wet environments. If the coating is chipped or scratched, the steel will rust.
Stainless steel latches are the most corrosion-resistant, and will hold up to water and chemicals.
Attach pull cords to a hole on the arm to open an unlocked gate from either side of the fence.
For technical drawings and 3-D models, click on a part number.
Strike Plate | Mounting | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Material | Appearance | Ht. | Wd. | Projection | Ht. | Wd. | Pull Cord Hole Dia. | For Max. Padlock Shackle Dia. | Fasteners Included | Screw Size | Adjustable Bolt Type | Each | |
Fixed 90° Bolt | |||||||||||||
304 Stainless Steel | Dull | 1/2" | 4" | 2 3/4" | 1 3/4" | 1 1/2" | 3/16" | 5/16" | No | No. 8 | __ | 0000000 | 000000 |
Fixed Straight Bolt | |||||||||||||
Black Powder-Coated 302 Stainless Steel | __ | 9/16" | 4 1/2" | 2 3/16" | 1 11/16" | 1 3/8" | 3/16" | 5/16" | __ | __ | __ | 0000000 | 00000 |
304 Stainless Steel | Dull | 1/2" | 4 3/4" | 2 3/4" | 1 3/4" | 1 1/2" | 3/16" | 5/16" | No | No. 8 | __ | 0000000 | 00000 |
Adjustable Straight Bolt | |||||||||||||
302 Stainless Steel | Dull | 1 13/16" | 4 1/8" | 2 1/8" | 1 13/16" | 1 3/8" | 3/16" | 5/16" | __ | __ | Button | 0000000 | 00000 |
Lg. | Mounting Fasteners Included | Each | |
40" | Yes | 0000000 | 000000 |
In addition to sliding gates, this lock is for use on cantilever and fixed-roller gates. With a key-locking mechanism, it provides more security than other gate locks. Choose this lock if you need locks that each open with a different key.
For technical drawings and 3-D models, click on a part number.
Strike Plate | |||||||||
---|---|---|---|---|---|---|---|---|---|
Material | For Through Hole Dia. | Ht. | Wd. | Ht. | Wd. | Mounting Fasteners Included | No. of Keys Included | Each | |
Through-Hole Mount | |||||||||
Gray Powder-Coated 300 Series Stainless Steel | 7/8" | 6 5/16" | 3 3/4" | 7 11/16" | 2 3/4" | Yes | 3 | 0000000 | 0000000 |
Slide the bolt and drop the knob into the notch to secure. All latches are reversible for right- and left-hand mounting.
For technical drawings and 3-D models, click on a part number.
Surface-Mount Strike Plate | Mortise-Mount Strike Plate | Mounting | Mounting Hole | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Projection | Bolt Dia. | Ht. | Wd. | Ht. | Wd. | Orientation | Fasteners Included | Screw Size | Dia. | Style | Each | ||
304 Stainless Steel—Dull (Nickel-Plated Brass Bolt) | |||||||||||||||
B | 1" | 2 3/8" | 9/16" | 1/4" | 1" | 13/16" | 1 5/16" | 9/16" | Horizontal | Yes | No. 4 | 1/8" | Countersunk | 0000000 | 000000 |
C | 1 1/16" | 3 9/16" | 11/16" | 5/16" | 1 1/16" | 1 7/16" | 1 7/16" | 5/8" | Horizontal | Yes | No. 4 | 1/8" | Countersunk | 0000000 | 00000 |
C | 1 1/16" | 5 15/16" | 11/16" | 5/16" | 1 1/16" | 1 7/16" | 1 7/16" | 5/8" | Horizontal | Yes | No. 4 | 1/8" | Countersunk | 0000000 | 00000 |
C | 1 1/16" | 9 1/2" | 11/16" | 5/16" | 1 1/16" | 1 7/16" | 1 7/16" | 5/8" | Horizontal | Yes | No. 4 | 1/8" | Countersunk | 0000000 | 00000 |
316 Stainless Steel—Polished | |||||||||||||||
D | 1 1/2" | 2 1/4" | 5/8" | 3/8" | 1 1/2" | 1 7/16" | __ | __ | Horizontal | No | No. 6 | 3/16" | Countersunk | 0000000 | 00000 |
D | 1 1/2" | 2 7/8" | 5/8" | 3/8" | 1 1/2" | 1 7/16" | __ | __ | Horizontal | No | No. 6 | 3/16" | Countersunk | 0000000 | 00000 |
The strike has angled ends, so these latches can accept their bolt even when doors become misaligned. All latches are reversible for right- and left-hand mounting.
304 stainless steel latches will hold up in humid, damp, and washdown environments, but will corrode if exposed to salt water or chemicals.
For technical drawings and 3-D models, click on a part number.
Surface-Mount Strike Plate | Mounting | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Projection | Bolt Dia. | Ht. | Wd. | Orientation | Fasteners Included | Slide-Bolt Type | Each | |
304 Stainless Steel—Dull | ||||||||||
1 1/2" | 1 5/16" | 1" | 5/16" | 1 1/2" | 1 1/4" | Horizontal, Vertical | Yes | Nonlocking | 0000000 | 00000 |
1 1/2" | 1 13/16" | 1" | 5/16" | 1 1/2" | 1 1/4" | Horizontal, Vertical | Yes | Nonlocking | 0000000 | 0000 |
1 1/2" | 2 3/16" | 1" | 5/16" | 1 1/2" | 1 1/4" | Horizontal, Vertical | Yes | Nonlocking | 0000000 | 0000 |
1 1/2" | 3" | 1" | 5/16" | 1 1/2" | 1 1/4" | Horizontal, Vertical | Yes | Nonlocking | 0000000 | 0000 |
1 1/2" | 4" | 1" | 5/16" | 1 1/2" | 1 1/4" | Horizontal, Vertical | Yes | Nonlocking | 0000000 | 00000 |
1 7/8" | 4 5/8" | 1 1/8" | 7/16" | 1 7/8" | 1 1/2" | Horizontal, Vertical | Yes | Padlockable | 0000000 | 00000 |
2 5/8" | 4 1/8" | 2 5/8" | 5/16" | 1 7/8" | 1 1/2" | Horizontal, Vertical | Yes | Padlockable | 0000000 | 00000 |
2 13/16" | 6" | 1 3/4" | 9/16" | 2 13/16" | 2 1/8" | Horizontal, Vertical | Yes | Padlockable | 0000000 | 00000 |
A large handle makes gripping these latches easier than other lift-and-drop barrel padlockable slide-bolt latches. Slide the bolt and drop the handle to secure. The handle stays out of the way when not in use. All latches are reversible for right- and left-hand mounting.
For technical drawings and 3-D models, click on a part number.
Surface-Mount Strike Plate | Mortise-Mount Strike Plate | Mounting | Mounting Hole | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Proj. | Bolt Dia. | For Max. Padlock Shackle Dia. | Ht. | Wd. | Ht. | Wd. | Orientation | Fasteners Included | Screw Size | Screw Lg. | Dia. | Style | Each | ||
304 Stainless Steel—Dull | |||||||||||||||||
B | 1 1/8" | 1 13/16" | 7/8" | 1/4" | 1/4" | 9/16" | 7/8" | 1 1/4" | 5/8" | Horizontal | Yes | No. 6 | 5/8" | 3/16" | Countersunk | 00000000 | 00000 |
B | 1 5/8" | 2 9/16" | 1 3/16" | 3/8" | 3/8" | 13/16" | 1 3/16" | 1 5/8" | 3/4" | Horizontal | Yes | No. 8 | 3/4" | 1/4" | Countersunk | 00000000 | 00000 |
B | 1 13/16" | 3 3/8" | 1 3/8" | 1/2" | 3/8" | 1" | 1 3/8" | 1 7/8" | 7/8" | Horizontal | Yes | No. 8 | 1" | 1/4" | Countersunk | 00000000 | 00000 |