How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Low-Pressure Stainless Steel Unthreaded Pipe Flanges
Bolt two flat-surface flanges or two raised-surface flanges of the same size together with a
Stub-end flanges are also known as lap-joint flanges; use them with a stub-end straight adapter (not included). The stub-end straight adapter slides into the flange and welds to pipe (not the flange). Since the flange isn’t welded to the pipe, it can be disconnected easily for frequent cleaning and inspecting. Forged flanges have better strength than cast flanges. 304 stainless steel flanges offer very good corrosion resistance, and 316 stainless steel flanges have excellent corrosion resistance.
- For Use With: Air, Water, Oil, Natural Gas
- Pressure Class: 150
- Specifications Met: ASTM A182, ASME B16.5
- Certification: Material Certificate with Traceable Lot Number and Test Report
- Fittings: Use schedule 40 stainless steel
- Pipe Nipples and Pipe: Use Schedule 40 stainless steel
Flanges | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bolt Hole | Thin-Wall Straight Adapters | Standard-Wall Straight Adapters | ||||||||||
| Pipe Size  | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Each | Each | Each | |||
304/304L Stainless Steel | ||||||||||||
| 1/2 | 3 1/2" | 1/2" | 5/8" | 4 | 2 3/8" | 230 psi @ 72° F | 000000000 | 000000 | 000000000 | 000000 | 000000000 | 000000 |
| 3/4 | 3 7/8" | 1/2" | 5/8" | 4 | 2 3/4" | 230 psi @ 72° F | 000000000 | 00000 | 000000000 | 00000 | 000000000 | 00000 |
| 1 | 4 1/4" | 1/2" | 5/8" | 4 | 3 1/8" | 230 psi @ 72° F | 000000000 | 00000 | 000000000 | 00000 | 000000000 | 00000 |
| 1 1/4 | 4 5/8" | 1/2" | 5/8" | 4 | 3 1/2" | 230 psi @ 72° F | 000000000 | 00000 | 000000000 | 00000 | 000000000 | 00000 |
| 1 1/2 | 5" | 1/2" | 5/8" | 4 | 3 7/8" | 230 psi @ 72° F | 000000000 | 00000 | 000000000 | 00000 | 000000000 | 00000 |
| 2 | 6" | 5/8" | 3/4" | 4 | 4 3/4" | 230 psi @ 72° F | 000000000 | 00000 | 000000000 | 00000 | 000000000 | 00000 |
| 2 1/2 | 7" | 5/8" | 3/4" | 4 | 5 1/2" | 230 psi @ 72° F | 000000000 | 000000 | 000000000 | 00000 | 000000000 | 00000 |
| 3 | 7 1/2" | 5/8" | 3/4" | 4 | 6" | 230 psi @ 72° F | 000000000 | 000000 | 000000000 | 00000 | 000000000 | 00000 |
| 4 | 9" | 5/8" | 3/4" | 8 | 7 1/2" | 230 psi @ 72° F | 000000000 | 000000 | 000000000 | 00000 | 000000000 | 00000 |
| 6 | 11" | 3/4" | 7/8" | 8 | 9 1/2" | 230 psi @ 72° F | 000000000 | 000000 | 000000000 | 000000 | 000000000 | 000000 |
| 8 | 13 1/2" | 3/4" | 7/8" | 8 | 11 3/4" | 230 psi @ 72° F | 000000000 | 000000 | 000000000 | 000000 | 000000000 | 000000 |
| 10 | 16" | 7/8" | 1" | 12 | 14 1/4" | 230 psi @ 72° F | 000000000 | 000000 | 000000000 | 000000 | 000000 | 00 |
| 12 | 19" | 7/8" | 1" | 12 | 17" | 230 psi @ 72° F | 000000000 | 000000 | 000000000 | 000000 | 000000 | 00 |
316/316L Stainless Steel | ||||||||||||
| 1/2 | 3 1/2" | 1/2" | 5/8" | 4 | 2 3/8" | 230 psi @ 72° F | 000000000 | 00000 | 000000000 | 00000 | 000000000 | 00000 |
| 3/4 | 3 7/8" | 1/2" | 5/8" | 4 | 2 3/4" | 230 psi @ 72° F | 000000000 | 00000 | 000000000 | 00000 | 000000000 | 00000 |
| 1 | 4 1/4" | 1/2" | 5/8" | 4 | 3 1/8" | 230 psi @ 72° F | 000000000 | 00000 | 000000000 | 00000 | 000000000 | 00000 |
| 1 1/4 | 4 5/8" | 1/2" | 5/8" | 4 | 3 1/2" | 230 psi @ 72° F | 000000000 | 00000 | 000000000 | 00000 | 000000000 | 00000 |
| 1 1/2 | 5" | 1/2" | 5/8" | 4 | 3 7/8" | 230 psi @ 72° F | 000000000 | 00000 | 000000000 | 00000 | 000000000 | 00000 |
| 2 | 6" | 5/8" | 3/4" | 4 | 4 3/4" | 230 psi @ 72° F | 000000000 | 00000 | 000000000 | 00000 | 000000000 | 00000 |
| 2 1/2 | 7" | 5/8" | 3/4" | 4 | 5 1/2" | 230 psi @ 72° F | 000000000 | 000000 | 000000000 | 000000 | 000000000 | 000000 |
| 3 | 7 1/2" | 5/8" | 3/4" | 4 | 6" | 230 psi @ 72° F | 000000000 | 000000 | 000000000 | 00000 | 000000000 | 00000 |
| 4 | 9" | 5/8" | 3/4" | 8 | 7 1/2" | 230 psi @ 72° F | 000000000 | 000000 | 000000000 | 00000 | 000000000 | 000000 |
| 6 | 11" | 3/4" | 7/8" | 8 | 9 1/2" | 230 psi @ 72° F | 000000000 | 000000 | 000000000 | 000000 | 000000000 | 000000 |
| 8 | 13 1/2" | 3/4" | 7/8" | 8 | 11 3/4" | 230 psi @ 72° F | 000000000 | 000000 | 000000000 | 000000 | 000000000 | 000000 |
| 12 | 19" | 7/8" | 1" | 12 | 17" | 230 psi @ 72° F | 000000000 | 000000 | 000000000 | 000000 | 000000 | 00 |
Standard-Wall Butt-Weld Stainless Steel Unthreaded Pipe Fittings
Also known as Schedule 40 fittings, these have thicker walls than our thin-wall stainless steel unthreaded butt-weld fittings. They have beveled ends that, when flush to pipe, create a trough for a strong weld that permits maximum flow.
304 stainless steel fittings have very good corrosion resistance. 316 stainless steel fittings have excellent corrosion resistance.
Stub-end straight adapters are used with flanges. Slide a flange onto the stub end and weld the stub end to pipe (not the flange). Since the flange isn’t welded to the pipe, it can be disconnected easily, which creates an access point for frequent cleaning and inspecting.
- For Use With: Air, Natural Gas, Oil, Water
- Specifications Met: ASME B16.9, ASTM A403, MSS SP-43
- Pipe Nipples and Pipe: Use Schedule 40 stainless steel
- Flanges: Use Class 150 stainless steel
Fittings | Flanges | |||||
|---|---|---|---|---|---|---|
| Pipe Size | Wall Thick. | Construction | Each | Each | ||
304/304L Stainless Steel | ||||||
| 1/2 | 0.109" | Welded | 000000000 | 000000 | 000000000 | 000000 |
| 3/4 | 0.113" | Welded | 000000000 | 00000 | 000000000 | 00000 |
| 1 | 0.133" | Welded | 000000000 | 00000 | 000000000 | 00000 |
| 1 1/4 | 0.14" | Welded | 000000000 | 00000 | 000000000 | 00000 |
| 1 1/2 | 0.145" | Welded | 000000000 | 00000 | 000000000 | 00000 |
| 2 | 0.154" | Welded | 000000000 | 00000 | 000000000 | 00000 |
| 2 1/2 | 0.203" | Welded | 000000000 | 00000 | 000000000 | 000000 |
| 3 | 0.216" | Welded | 000000000 | 00000 | 000000000 | 000000 |
| 4 | 0.237" | Welded | 000000000 | 00000 | 000000000 | 000000 |
| 6 | 0.28" | Welded | 000000000 | 000000 | 000000000 | 000000 |
| 8 | 0.322" | Welded | 000000000 | 000000 | 000000000 | 000000 |
316/316L Stainless Steel | ||||||
| 1/2 | 0.109" | Welded | 000000000 | 00000 | 000000000 | 00000 |
| 3/4 | 0.113" | Welded | 000000000 | 00000 | 000000000 | 00000 |
| 1 | 0.133" | Welded | 000000000 | 00000 | 000000000 | 00000 |
| 1 1/4 | 0.14" | Welded | 000000000 | 00000 | 000000000 | 00000 |
| 1 1/2 | 0.145" | Welded | 000000000 | 00000 | 000000000 | 00000 |
| 2 | 0.154" | Welded | 000000000 | 00000 | 000000000 | 00000 |
| 2 1/2 | 0.203" | Welded | 000000000 | 000000 | 000000000 | 000000 |
| 3 | 0.216" | Welded | 000000000 | 00000 | 000000000 | 000000 |
| 4 | 0.237" | Welded | 000000000 | 000000 | 000000000 | 000000 |
| 6 | 0.28" | Welded | 000000000 | 000000 | 000000000 | 000000 |
| 8 | 0.322" | Welded | 000000000 | 000000 | 000000000 | 000000 |
High-Pressure Stainless Steel Unthreaded Pipe Flanges
Use these heavy duty forged flanges for high-pressure applications. Bolt two flat-surface flanges or two raised-surface flanges of same size together with a gasket (sold separately) to create an access point in a pipe line.
304 stainless steel flanges offer very good corrosion resistance. 316 stainless steel flanges have excellent corrosion resistance.
Stub-end flanges are also known as lap-joint flanges; use them with a stub-end straight adapter (not included). The stub-end straight adapter slides into the flange and welds to pipe (not the flange). Since the flange isn’t welded to the pipe, it can be disconnected easily for frequent cleaning and inspecting.
- For Use With: Air, Hydraulic Fluid, Natural Gas, Oil, Steam, Water
- Pressure Class: See table
- Specifications Met:
Pressure Class 300: ASME B16.5, ASTM A182, MSS SP-25, MSS SP-6
Pressure Class 600: ASME B16.5, ASTM A182 - Certification:: Material Certificate with Traceable Lot Number and Test Report
- Pipe Nipples and Pipe: Use Schedule 40 stainless steel
- Fittings: Use Schedule 40 stainless steel
Flanges | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bolt Hole | Straight Adapters | |||||||||||
| Pipe Size | Dash Size | Max. Pressure | Max. Steam Pressure | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Each | Each | ||
304/304L Stainless Steel | ||||||||||||
Pressure Class 300 | ||||||||||||
| 3/4 | 12 | 600 psi @ 72° F | 300 psi @ 360° F | 4 5/8" | 5/8" | 0.75" | 4 | 3 1/4" | 00000000 | 000000 | 000000000 | 000000 |
| 1 | 16 | 600 psi @ 72° F | 300 psi @ 360° F | 4 7/8" | 5/8" | 0.75" | 4 | 3 1/2" | 00000000 | 00000 | 000000000 | 00000 |
| 1 1/2 | 24 | 600 psi @ 72° F | 300 psi @ 360° F | 6 1/8" | 3/4" | 0.875" | 4 | 4 1/2" | 00000000 | 000000 | 000000000 | 00000 |
| 2 | 32 | 600 psi @ 72° F | 300 psi @ 360° F | 6 1/2" | 5/8" | 0.75" | 8 | 5" | 00000000 | 000000 | 000000000 | 00000 |
| 2 1/2 | 40 | 600 psi @ 72° F | 300 psi @ 360° F | 7 1/2" | 3/4" | 0.875" | 8 | 5 7/8" | 00000000 | 000000 | 000000000 | 00000 |
| 3 | 48 | 600 psi @ 72° F | 300 psi @ 360° F | 8 1/4" | 3/4" | 0.875" | 8 | 6 5/8" | 00000000 | 000000 | 000000000 | 00000 |
| 4 | 64 | 600 psi @ 72° F | 300 psi @ 360° F | 10" | 3/4" | 0.875" | 8 | 7 7/8" | 00000000 | 000000 | 000000000 | 00000 |
| 6 | 96 | 600 psi @ 72° F | 300 psi @ 360° F | 12 1/2" | 3/4" | 0.875" | 12 | 10 5/8" | 00000000 | 000000 | 000000000 | 000000 |
Pressure Class 600 | ||||||||||||
| 1 | 16 | 1,200 psi @ 72° F | 840 psi @ 400° F | 4 7/8" | 5/8" | 0.75" | 4 | 3 1/2" | 0000000 | 00000 | 000000000 | 00000 |
| 4 | 64 | 1,200 psi @ 72° F | 840 psi @ 400° F | 10 3/4" | 7/8" | 1" | 8 | 8 1/2" | 0000000 | 000000 | 000000000 | 00000 |
316/316L Stainless Steel | ||||||||||||
Pressure Class 300 | ||||||||||||
| 1 | 16 | 600 psi @ 72° F | 300 psi @ 360° F | 4 7/8" | 5/8" | 0.75" | 4 | 3 1/2" | 00000000 | 00000 | 000000000 | 00000 |
| 1 1/2 | 24 | 600 psi @ 72° F | 300 psi @ 360° F | 6 1/8" | 3/4" | 0.875" | 4 | 4 1/2" | 00000000 | 000000 | 000000000 | 00000 |
| 2 | 32 | 600 psi @ 72° F | 300 psi @ 360° F | 6 1/2" | 5/8" | 0.75" | 8 | 5" | 00000000 | 000000 | 000000000 | 00000 |
| 2 1/2 | 40 | 600 psi @ 72° F | 300 psi @ 360° F | 7 1/2" | 3/4" | 0.875" | 8 | 5 7/8" | 00000000 | 000000 | 000000000 | 000000 |
| 3 | 48 | 600 psi @ 72° F | 300 psi @ 360° F | 8 1/4" | 3/4" | 0.875" | 8 | 6 5/8" | 00000000 | 000000 | 000000000 | 00000 |
Thin-Wall Butt-Weld Stainless Steel Unthreaded Pipe Fittings
Also known as Schedule 10 fittings, these are thin and lightweight. They have beveled ends that, when flush to pipe, create a trough for a strong weld that permits maximum flow.
304 stainless steel fittings have very good corrosion resistance. 316 stainless steel fittings have excellent corrosion resistance.
Stub-end straight adapters are used with flanges. Slide a flange onto the stub end and weld the stub end to pipe (not the flange). Since the flange isn’t welded to the pipe, it can be disconnected easily, which creates an access point for frequent cleaning and inspecting.
- For Use With: Air, Natural Gas, Oil, Water
- Specifications Met: ASME B16.9, ASTM A403, MSS SP-43
- Pipe: Use Schedule 10 stainless steel
Straight Adapters | Flanges | ||||||
|---|---|---|---|---|---|---|---|
| Pipe Size | Wall Thick. | Flange OD | Construction | Each | Each | ||
304/304L Stainless Steel | |||||||
| 1/2 | 0.083" | 1 3/8" | Welded | 000000000 | 000000 | 000000000 | 000000 |
| 3/4 | 0.083" | 1 11/16" | Welded | 000000000 | 00000 | 000000000 | 00000 |
| 1 | 0.109" | 2" | Welded | 000000000 | 00000 | 000000000 | 00000 |
| 1 1/4 | 0.109" | 2 1/2" | Welded | 000000000 | 00000 | 000000000 | 00000 |
| 1 1/2 | 0.109" | 2 7/8" | Welded | 000000000 | 00000 | 000000000 | 00000 |
| 2 | 0.109" | 3 5/8" | Welded | 000000000 | 00000 | 000000000 | 00000 |
| 2 1/2 | 0.12" | 4 1/8" | Welded | 000000000 | 00000 | 000000000 | 000000 |
| 3 | 0.12" | 5" | Welded | 000000000 | 00000 | 000000000 | 000000 |
| 4 | 0.12" | 6 3/16" | Welded | 000000000 | 00000 | 000000000 | 000000 |
| 6 | 0.134" | 8 1/2" | Welded | 000000000 | 000000 | 000000000 | 000000 |
| 8 | 0.148" | 10 5/8" | Welded | 000000000 | 000000 | 000000000 | 000000 |
| 10 | 0.134" | 12 3/4" | Welded | 000000000 | 000000 | 000000000 | 000000 |
| 12 | 0.156" | 15" | Welded | 000000000 | 000000 | 000000000 | 000000 |
316/316L Stainless Steel | |||||||
| 1/2 | 0.083" | 1 3/8" | Welded | 000000000 | 00000 | 000000000 | 00000 |
| 3/4 | 0.083" | 1 11/16" | Welded | 000000000 | 00000 | 000000000 | 00000 |
| 1 | 0.109" | 2" | Welded | 000000000 | 00000 | 000000000 | 00000 |
| 1 1/4 | 0.109" | 2 1/2" | Welded | 000000000 | 00000 | 000000000 | 00000 |
| 1 1/2 | 0.109" | 2 7/8" | Welded | 000000000 | 00000 | 000000000 | 00000 |
| 2 | 0.109" | 3 5/8" | Welded | 000000000 | 00000 | 000000000 | 00000 |
| 2 1/2 | 0.12" | 4 1/8" | Welded | 000000000 | 000000 | 000000000 | 000000 |
| 3 | 0.12" | 5" | Welded | 000000000 | 00000 | 000000000 | 000000 |
| 4 | 0.12" | 6 3/16" | Welded | 000000000 | 00000 | 000000000 | 000000 |
| 6 | 0.134" | 8 1/2" | Welded | 000000000 | 000000 | 000000000 | 000000 |
| 8 | 0.148" | 10 5/8" | Welded | 000000000 | 000000 | 000000000 | 000000 |
| 12 | 0.18" | 15" | Welded | 000000000 | 000000 | 000000000 | 000000 |