Polished to either a brushed or mirror-like finish, this material is often used to fabricate decorative enclosures and industrial workstations.

Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.

Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.

This welded, one-piece strut channel combines two strut channels back-to-back.

Designed to wrap around the sides of strut channel, these brackets provide a stronger hold than other strut channel brackets.

Create a four-sided raceway for cable, or give a more finished look to strut channel structures.

Also known as insert nuts, these convert slotted holes to threaded round holes and keep them centered in the channel.

There's no need for additional fasteners with these nuts—they combine a strut channel nut with a spring and a threaded stud.

Add hardware to strut channel without having to hold the washer in place or reach inside the channel.

Notches on these washers grip the channel to keep them in place.

Cover rough ends of strut channel.

Position two strut channels at a 30° to 90° angle, then tighten the bolt to secure.