McMaster-Carr logo
    Filter by
    Attachment Type
    Safety Factor
    Industrial Info Snippet
    Applied Load Direction
    For Use With
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    For Web Width
    Clevis Inside Width
    Usable Length
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    147 Products

    Anchor Shackles for Lifting

    Your go-to choice for connecting hooks, slings, and other rigging and lifting equipment. The rounded body on these shackles supports vertical or side loads without fatiguing or warping the shape. They meet ASME specifications for rigging and lifting, so they can hoist everything from steel beams to bulldozers. Look for the manufacturer's stamp to confirm the size and weight capacity. Also known as bow shackles.
    Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.
    Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.
    Safety Cotter Pin—Both a threaded nut and cotter pin hold these shackles in place. Also known as bolt-type shackles, the pin won’t slide out with movement. This means you can use these shackles with vibrating equipment and for long-term rigging setups.
    Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant shackles stand up to moisture, salt water, and chemicals.
    Thk.
    Opening
    Wd.
    Pin
    Dia.
    Inside
    Lg.
    Inside
    Wd.
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    Screw Pin
    Image of Product. Front orientation. Shackles. Anchor Shackles for Lifting, Screw Pin.
     
    Highly Corrosion-Resistant 316 Stainless Steel
    3/16"13/32"1/4"27/32"19/32"650ASME B30.26, Fed. Spec. RR-C-271000000000000
    1/4"15/32"5/16"1 1/8"3/4"1,000ASME B30.26, Fed. Spec. RR-C-271000000000000
    5/16"17/32"3/8"1 7/32"13/16"1,300ASME B30.26, Fed. Spec. RR-C-271000000000000
    3/8"21/32"7/16"1 7/16"31/32"1,500ASME B30.26, Fed. Spec. RR-C-271000000000000
    7/16"23/32"1/2"1 25/32"1 1/16"2,000ASME B30.26, Fed. Spec. RR-C-271000000000000
    1/2"13/16"5/8"1 27/32"1 7/32"3,000ASME B30.26, Fed. Spec. RR-C-271000000000000
    5/8"1 1/32"3/4"2 7/16"1 1/2"4,000ASME B30.26, Fed. Spec. RR-C-271000000000000
    3/4"1 1/4"7/8"2 27/32"1 29/32"6,000ASME B30.26, Fed. Spec. RR-C-271000000000000
    7/8"1 15/32"1"3 5/16"2 7/32"8,000ASME B30.26, Fed. Spec. RR-C-271000000000000
    1"1 11/16"1 1/8"3 13/16"2 5/16"10,000ASME B30.26, Fed. Spec. RR-C-2710000000000000
    1 1/4"2 1/32"1 3/8"4 11/16"3 5/16"14,000ASME B30.26, Fed. Spec. RR-C-2710000000000000
     
    Safety Cotter Pin
    Image of Product. Front orientation. Shackles. Anchor Shackles for Lifting, Safety Cotter Pin.
     
    Highly Corrosion-Resistant 316 Stainless Steel
    1/4"1/2"5/16"1 1/8"3/4"1,000ASME B30.26, Fed. Spec. RR-C-271000000000000
    5/16"17/32"3/8"1 7/32"13/16"1,300ASME B30.26, Fed. Spec. RR-C-271000000000000
    3/8"11/16"7/16"1 7/16"31/32"1,500ASME B30.26, Fed. Spec. RR-C-271000000000000
    7/16"3/4"1/2"1 25/32"1 1/16"2,000ASME B30.26, Fed. Spec. RR-C-271000000000000
    1/2"27/32"5/8"1 27/32"1 7/32"3,000ASME B30.26, Fed. Spec. RR-C-271000000000000
    5/8"1 1/32"3/4"2 7/16"1 1/2"4,000ASME B30.26, Fed. Spec. RR-C-271000000000000
    3/4"1 1/4"7/8"2 27/32"1 3/4"6,000ASME B30.26, Fed. Spec. RR-C-2710000000000000
    7/8"1 1/2"1"3 5/16"2"8,000ASME B30.26, Fed. Spec. RR-C-2710000000000000
    1"1 23/32"1 1/8"3 13/16"2 5/16"10,000ASME B30.26, Fed. Spec. RR-C-2710000000000000
    1 1/4"2 1/32"1 3/8"4 11/16"3 5/16"14,000ASME B30.26, Fed. Spec. RR-C-2710000000000000
     

    Anchor Shackles

    Image of Product. Front orientation. Shackles. Anchor Shackles, Screw Pin.

    Screw Pin

    Image of Product. Front orientation. Shackles. Anchor Shackles, Flush Screw Pin.

    Flush Screw Pin

    Image of Product. Front orientation. Shackles. Anchor Shackles, Captive-Locking-Screw Pin.

    Captive-Locking-Screw

    Pin

    Image of Product. Front orientation. Shackles. Anchor Shackles, Safety Cotter Pin.

    Safety Cotter Pin

    The most common choice for connecting slings, hooks, and more. The bow on these shackles is wider than the pin to support loads from multiple directions and accommodate multiple connectors. They’re often used to tie down or secure loads for transport or storage. Also known as bow shackles.
    Warning: Not for overhead lifting.
    Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.
    Flush Screw Pin—The ends of the pin sit flush with the shackle, so they won’t snag or catch on anything that might loosen the shackle.
    Captive-Locking-Screw Pin—The pin on these shackles won’t fall out or get lost. Even when unscrewed, an inner lip on the shackle ear keeps the pin from sliding all the way out. Indentations in the shackle body hold the head of the pin in place once fastened to secure it from vibration and movement.
    Safety Cotter Pin—Both a threaded nut and cotter pin hold these shackles in place. Also known as bolt-type shackles, the pin won’t slide out with movement. This means you can use these shackles with vibrating equipment and for long-term rigging setups.
    Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant shackles stand up to moisture, salt water, and chemicals.
    Thk.
    Opening
    Wd.
    Pin
    Dia.
    Inside
    Lg.
    Inside
    Wd.
    Wt. Cap.,
    lb.
    Each
    Screw Pin
     
    Highly Corrosion-Resistant 316 Stainless Steel
    5/32"11/32"5/32"3/4"9/16"2000000000000000
    3/16"7/16"7/32"31/32"23/32"500000000000000
    1/4"1/2"1/4"1 3/32"27/32"700000000000000
    5/16"11/16"5/16"1 15/32"1 1/8"1,000000000000000
    3/8"13/16"13/32"1 25/32"1 3/8"1,200000000000000
    15/32"15/16"15/32"2 5/32"1 21/32"1,5000000000000000
    1/2"1 1/16"17/32"2 11/32"1 7/8"2,5000000000000000
    5/8"1 1/4"5/8"3"2 3/16"3,0000000000000000
    3/4"1 1/2"3/4"3 11/32"2 11/16"4,0000000000000000
    7/8"1 23/32"7/8"3 27/32"2 31/32"5,0000000000000000
    1"1 31/32"31/32"4 7/16"3 3/8"6,00000000000000000
    1 1/4"2 1/2"1 1/4"5 7/16"4 15/32"9,00000000000000000
     
    Flush Screw Pin
     
    Highly Corrosion-Resistant 316 Stainless Steel
    1/4"15/32"1/4"1 1/32"25/32"75000000000000
    5/16"21/32"5/16"1 7/16"1 1/32"1,00000000000000
    3/8"25/32"13/32"1 3/4"1 1/4"1,200000000000000
    15/32"15/16"1/2"2 5/32"1 19/32"1,500000000000000
    1/2"1 1/32"17/32"2 5/16"1 27/32"2,500000000000000
    5/8"1 1/4"21/32"3"2 3/32"3,000000000000000
    3/4"1 1/2"3/4"3 5/16"2 17/32"4,000000000000000
    7/8"1 23/32"7/8"3 27/32"2 7/8"5,000000000000000
    1"1 15/16"31/32"4 13/32"3 1/4"6,000000000000000
     
    Captive-Locking-Screw Pin
     
    Highly Corrosion-Resistant 316 Stainless Steel
    5/32"5/16"3/16"23/32"1/2"400000000000000
    3/16"13/32"1/4"29/32"5/8"600000000000000
    1/4"15/32"9/32"1 3/32"3/4"900000000000000
    5/16"5/8"11/32"1 15/32"1 1/32"1,600000000000000
    3/8"25/32"13/32"1 3/4"1 11/32"1,2000000000000000
    13/32"25/32"7/16"1 13/16"1 3/8"2,200000000000000
    15/32"15/16"15/32"2 5/32"1 21/32"1,5000000000000000
     
    Safety Cotter Pin
     
    Highly Corrosion-Resistant 316 Stainless Steel
    1/4"1/2"1/4"29/32"13/16"75000000000000
    5/16"21/32"5/16"1 1/4"1 3/32"1,20000000000000
    3/8"13/16"13/32"1 9/16"1 1/4"2,000000000000000
    15/32"31/32"1/2"1 15/16"1 1/2"3,000000000000000
    5/8"1 9/32"5/8"2 15/32"2 3/16"4,000000000000000
    3/4"1 19/32"25/32"3 3/32"2 17/32"5,500000000000000
     

    D-Type Shackles

    Image of Product. Front orientation. Shackles. D-Type Shackles, Screw Pin.

    Screw Pin

    Image of Product. Front orientation. Shackles. D-Type Shackles, Flush Screw Pin.

    Flush Screw Pin

    Image of Product. Front orientation. Shackles. D-Type Shackles, Locking-Screw Pin.

    Locking-Screw Pin

    Image of Product. Front orientation. Shackles. D-Type Shackles, Captive-Locking-Screw Pin.

    Captive-Locking-Screw

    Pin

    Image of Product. Front orientation. Shackles. D-Type Shackles, Safety Cotter Pin.

    Safety Cotter Pin

    Pair these shackles with chain to pull and tow loads. The narrow bow prevents chain links from sliding or moving, but they're rated for inline tension only—they can’t handle pulling or tension to the side. Also known as chain shackles.
    Warning: Not for overhead lifting.
    Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.
    Flush Screw Pin—The ends of the pin sit flush with the shackle, so they won’t snag or catch on anything that might loosen the shackle.
    Locking-Screw Pin—Indentations in the shackle body hold the head of the pin in place once fastened, so the pin won’t loosen from vibration or movement as easily as other screw pins.
    Captive-Locking-Screw Pin—The pin on these shackles won’t fall out or get lost. Even when unscrewed, an inner lip on the shackle ear keeps the pin from sliding all the way out. Indentations in the shackle body hold the head of the pin in place once fastened to secure it from vibration and movement.
    Safety Cotter Pin—Both a threaded nut and cotter pin hold these shackles in place. Also known as bolt-type shackles, the pin won’t slide out with movement. This means you can use these shackles with vibrating equipment and for long-term rigging setups.
    Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant shackles stand up to moisture, salt water, and chemicals.
    Thk.
    Opening
    Wd.
    Pin
    Dia.
    Inside
    Lg.
    Inside
    Wd.
    Wt. Cap.,
    lb.
    Each
    Screw Pin
     
    Highly Corrosion-Resistant 316 Stainless Steel
    3/16"13/32"7/32"21/32"13/32"500000000000000
    1/4"1/2"1/4"13/16"1/2"75000000000000
    5/16"21/32"5/16"1 3/32"21/32"1,00000000000000
    3/8"13/16"13/32"1 11/32"13/16"2,000000000000000
    15/32"31/32"1/2"1 5/8"31/32"3,000000000000000
    5/8"1 9/32"5/8"2 3/16"1 9/32"4,000000000000000
    3/4"1 19/32"25/32"2 3/4"1 19/32"5,500000000000000
     
    Flush Screw Pin
     
    Highly Corrosion-Resistant 316 Stainless Steel
    1/4"15/32"1/4"27/32"15/32"75000000000000
    5/16"21/32"5/16"1 3/32"21/32"1,00000000000000
    3/8"25/32"13/32"1 3/8"25/32"1,20000000000000
    15/32"29/32"1/2"1 5/8"29/32"1,500000000000000
    1/2"1 1/16"9/16"1 13/16"1 1/16"2,500000000000000
    5/8"1 1/4"21/32"2 3/16"1 1/4"3,000000000000000
    3/4"1 1/2"3/4"2 19/32"1 1/2"4,000000000000000
    7/8"1 23/32"7/8"3"1 23/32"5,000000000000000
    1"1 15/16"1"3 13/32"1 15/16"6,000000000000000
     
    Locking-Screw Pin
     
    Highly Corrosion-Resistant 316 Stainless Steel
    5/32"11/32"5/32"17/32"11/32"300000000000000
    3/16"13/32"3/16"21/32"13/32"400000000000000
    1/4"1/2"1/4"13/16"1/2"700000000000000
    5/16"21/32"5/16"1 1/32"21/32"1,100000000000000
    13/32"13/16"13/32"1 5/16"13/16"1,800000000000000
    15/32"31/32"15/32"1 9/16"31/32"2,600000000000000
     
    Captive-Locking-Screw Pin
     
    Highly Corrosion-Resistant 316 Stainless Steel
    5/32"11/32"3/16"17/32"11/32"400000000000000
    3/16"13/32"7/32"21/32"13/32"600000000000000
    1/4"1/2"1/4"13/16"1/2"900000000000000
    5/16"21/32"11/32"1 1/32"21/32"1,500000000000000
    13/32"13/16"13/32"1 5/16"13/16"2,200000000000000
    15/32"31/32"1/2"1 9/16"31/32"3,0000000000000000
     
    Safety Cotter Pin
     
    Highly Corrosion-Resistant 316 Stainless Steel
    1/4"1/2"1/4"13/16"1/2"75000000000000
    5/16"21/32"5/16"1 3/32"21/32"1,00000000000000
    3/8"13/16"13/32"1 11/32"13/16"2,000000000000000
    15/32"31/32"1/2"1 5/8"31/32"3,000000000000000
    5/8"1 9/32"5/8"2 3/16"1 9/32"4,000000000000000
    3/4"1 1/2"25/32"2 3/4"1 1/2"5,500000000000000
     

    Long-Reach D-Type Shackles

    Image of Product. Front orientation. Shackles. Long-Reach D-Type Shackles, Screw Pin.

    Screw Pin

    Image of Product. Front orientation. Shackles. Long-Reach D-Type Shackles, Locking-Screw Pin.

    Locking-Screw

    Pin

    Image of Product. Front orientation. Shackles. Long-Reach D-Type Shackles, Captive-Locking-Screw Pin.

    Captive-Locking-Screw

    Pin

    Gain extra reach with these shackles. With an elongated body, they can connect loads to an anchor point too far for a standard shackle. They're best paired with chain, since their narrow bow prevents chain links from sliding or moving. These shackles are rated for inline tension only—they can’t handle pulling or tension to the side.
    Warning: Not for overhead lifting.
    Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.
    Locking-Screw Pin—Indentations in the shackle body hold the head of the pin in place once fastened, so the pin won’t loosen from vibration or movement as easily as other screw pins.
    Captive-Locking-Screw Pin—The pin on these shackles won’t fall out or get lost. Even when unscrewed, an inner lip on the shackle ear keeps the pin from sliding all the way out. Indentations in the shackle body hold the head of the pin in place once fastened to secure it from vibration and movement.
    Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant shackles stand up to moisture, salt water, and chemicals.
    Thk.
    Opening
    Wd.
    Pin
    Dia.
    Inside
    Lg.
    Inside
    Wd.
    Wt. Cap.,
    lb.
    Each
    Screw Pin
     
    Highly Corrosion-Resistant 316 Stainless Steel
    5/32"11/32"5/32"1 3/16"11/32"2000000000000000
    3/16"7/16"3/16"1 1/2"7/16"500000000000000
    1/4"1/2"1/4"1 3/4"1/2"700000000000000
    5/16"11/16"5/16"2 5/16"11/16"1,000000000000000
    3/8"25/32"3/8"2 7/8"25/32"1,2000000000000000
    1/2"15/16"15/32"3 1/2"15/16"1,5000000000000000
     
    Locking-Screw Pin
     
    Highly Corrosion-Resistant 316 Stainless Steel
    5/32"11/32"3/16"7/8"5/16"300000000000000
    3/16"13/32"7/32"1 5/32"3/8"400000000000000
    1/4"1/2"1/4"1 5/16"15/32"700000000000000
    5/16"21/32"11/32"1 3/4"5/8"1,100000000000000
     
    Captive-Locking-Screw Pin
     
    Highly Corrosion-Resistant 316 Stainless Steel
    5/32"11/32"3/16"1 1/4"5/16"400000000000000
    3/16"13/32"7/32"1 9/16"3/8"600000000000000
    1/4"1/2"1/4"1 13/16"15/32"900000000000000
    5/16"21/32"11/32"2 15/32"5/8"1,500000000000000
     

    D-Type Shackles for Lifting

    Image of Product. Front orientation. Shackles. D-Type Shackles for Lifting, Screw Pin.

    Screw Pin

    Image of Product. Front orientation. Shackles. D-Type Shackles for Lifting, Safety Cotter Pin.

    Safety Cotter Pin

    The best choice for lifting with chain. The bow and pin are equally wide to keep chain links from sliding or moving and support heavier vertical loads than anchor shackles. However, they're rated for vertical lifting only, as side loading might deform the bow. All meet ASME specifications for use with rigging and lifting equipment. Look for the manufacturer's stamp to confirm the size and weight capacity. Also known as chain shackles.
    Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.
    Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.
    Safety Cotter Pin—Both a threaded nut and cotter pin hold these shackles in place. Also known as bolt-type shackles, the pin won’t slide out with movement. This means you can use these shackles with vibrating equipment and for long-term rigging setups.
    Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant shackles stand up to moisture, salt water, and chemicals.
    Thk.
    Opening
    Wd.
    Pin
    Dia.
    Inside
    Lg.
    Inside
    Wd.
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    Screw Pin
     
    Highly Corrosion-Resistant 316 Stainless Steel
    1/4"15/32"5/16"7/8"15/32"1,000ASME B30.26, Fed. Spec. RR-C-27100000000000000
    5/16"17/32"13/32"1 1/32"17/32"1,300ASME B30.26, Fed. Spec. RR-C-2710000000000000
    3/8"21/32"15/32"1 1/4"21/32"1,500ASME B30.26, Fed. Spec. RR-C-27100000000000000
    7/16"3/4"1/2"1 7/16"3/4"2,000ASME B30.26, Fed. Spec. RR-C-27100000000000000
    1/2"13/16"21/32"1 19/32"13/16"3,000ASME B30.26, Fed. Spec. RR-C-27100000000000000
    5/8"1 1/16"3/4"1 31/32"1 1/16"4,000ASME B30.26, Fed. Spec. RR-C-27100000000000000
    3/4"1 7/32"29/32"2 13/32"1 7/32"6,000ASME B30.26, Fed. Spec. RR-C-27100000000000000
    7/8"1 15/32"1"2 29/32"1 15/32"8,000ASME B30.26, Fed. Spec. RR-C-271000000000000000
    1"1 11/16"1 5/32"3 7/32"1 11/16"10,000ASME B30.26, Fed. Spec. RR-C-271000000000000000
     
    Safety Cotter Pin
     
    Highly Corrosion-Resistant 316 Stainless Steel
    3/8"21/32"15/32"1 1/4"21/32"1,500ASME B30.26, Fed. Spec. RR-C-27100000000000000
    1/2"13/16"21/32"1 19/32"13/16"3,000ASME B30.26, Fed. Spec. RR-C-27100000000000000
    5/8"1 1/16"3/4"1 31/32"1 1/16"4,000ASME B30.26, Fed. Spec. RR-C-27100000000000000
    3/4"1 7/32"29/32"2 13/32"1 7/32"6,000ASME B30.26, Fed. Spec. RR-C-271000000000000000
    7/8"1 15/32"1"2 29/32"1 15/32"8,000ASME B30.26, Fed. Spec. RR-C-271000000000000000
    1"1 11/16"1 5/32"3 7/32"1 11/16"10,000ASME B30.26, Fed. Spec. RR-C-271000000000000000
     

    90° Twist Shackles

    Image of Product. Front orientation. Shackles. 90° Twist Shackles, Screw Pin.

    Screw Pin

    Image of Product. Front orientation. Shackles. 90° Twist Shackles, Flush Screw Pin.

    Flush Screw

    Pin

    Image of Product. Front orientation. Shackles. 90° Twist Shackles, Captive-Locking-Screw Pin.

    Captive-Locking-Screw

    Pin

    Connect loads perpendicular to your anchor point without any twisting or knotting. The bow on these shackles is twisted 90° from the orientation of the pin, so they keep chain, ropes, and slings connected to the load and lifting point properly aligned.
    Warning: Not for overhead lifting.
    Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.
    Flush Screw Pin—The ends of the pin sit flush with the shackle, so they won’t snag or catch on anything that might loosen the shackle.
    Captive-Locking-Screw Pin—The pin on these shackles won’t fall out or get lost. Even when unscrewed, an inner lip on the shackle ear keeps the pin from sliding all the way out. Indentations in the shackle body hold the head of the pin in place once fastened to secure it from vibration and movement.
    Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant shackles stand up to moisture, salt water, and chemicals.
    Thk.
    Opening
    Wd.
    Pin
    Dia.
    Inside
    Lg.
    Inside
    Wd.
    Wt. Cap.,
    lb.
    Each
    Screw Pin
     
    Highly Corrosion-Resistant 316 Stainless Steel
    5/32"5/16"5/32"5/8"5/16"2000000000000000
    3/16"3/8"3/16"13/16"3/8"500000000000000
    1/4"7/16"1/4"1"7/16"700000000000000
    5/16"9/16"5/16"1 5/16"9/16"1,0000000000000000
    3/8"23/32"3/8"1 13/16"23/32"1,2000000000000000
    1/2"31/32"1/2"2 13/16"31/32"1,5000000000000000
     
    Flush Screw Pin
     
    Highly Corrosion-Resistant 316 Stainless Steel
    1/4"13/32"1/4"1"15/32"75000000000000
    5/16"5/8"5/16"1 9/32"21/32"1,00000000000000
    3/8"11/16"13/32"1 25/32"3/4"1,200000000000000
    1/2"15/16"1/2"2 3/16"27/32"1,500000000000000
     
    Captive-Locking-Screw Pin
     
    Highly Corrosion-Resistant 316 Stainless Steel
    1/4"13/32"1/4"1"15/32"75000000000000
    5/16"5/8"5/16"1 9/32"21/32"1,00000000000000
    3/8"25/32"11/32"1 25/32"3/4"1,200000000000000
     

    Flat Shackles

    Image of Product. Front orientation. Shackles. Flat Shackles.
    Keep loads distributed equally when using a web sling. The wide, flat bow on these shackles prevents slings from folding or bunching.
    Warning: Not for overhead lifting.
    Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.
    Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant shackles stand up to moisture, salt water, and chemicals.
    For Web
    Wd.
    Thk.
    Opening
    Wd.
    Pin
    Dia.
    Inside
    Lg.
    Inside
    Wd.
    Wt. Cap.,
    lb.
    Each
    Screw Pin
     
    Highly Corrosion-Resistant 316 Stainless Steel
    1"5/32"5/16"7/32"1 1/8"1"200000000000000
     

    Quick-Release Shackles

    Image of Product. Pin-Release Shackles with Clevis End. Front orientation. Shackles. Quick-Release Shackles, Pin-Release Shackles, Clevis.

    Pin-Release

    Shackles

    with Clevis

    End

    Image of Product. Pin-Release Shackles with Eye End. Front orientation. Shackles. Quick-Release Shackles, Pin-Release Shackles, Eye.

    Pin-Release

    Shackles

    with Eye End

    Push the spring-loaded pin or collar to fasten these shackles, then pull it to release them. Traditionally used to secure and adjust lines on boats, they open faster than shackles with a screw or cotter pin.
    Warning: Not for overhead lifting.
    Pin-Release Shackles—Attach a rope, chain, or other pull to the pin to open the shackle from a distance. The end connection swivels for easy connecting and adjusting.
    High-Strength 17-4 PH Stainless Steel—Made from one of the strongest types of stainless steel, these shackles won’t deform from vibration or stress. They also stand up to wet and outdoor environments.
    Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant shackles stand up to moisture, salt water, and chemicals.
    Opening
    Wd.
    Inside
    Lg.
    Wt. Cap.,
    lb.
    End Attachment
    Type
    Clevis
    Inside Wd.
    Eye
    ID
    Each
    Pin-Release Shackles
     
    High-Strength 17-4 PH Stainless Steel
    5/8"2 3/8"1,200Eye—7/16"0000000000000
    13/16"3 1/4"2,100Clevis7/16"—0000000000000
    1"4 1/8"4,400Eye—13/16"0000000000000
    1"4 1/4"3,800Clevis11/16"—0000000000000
     
    Highly Corrosion-Resistant 316 Stainless Steel
    3/4"2 7/8"1,500Clevis1/2"—000000000000
    3/4"2 7/8"1,500Eye—5/8"000000000000
    1 1/16"4 1/8"2,000Eye—7/8"000000000000
    1 1/16"4 3/16"2,000Clevis3/4"—000000000000
     

    Release-Under-Load Shackles

    Image of Product. Front orientation. Shackles. Release-Under-Load Shackles.
    Pull the lever on these shackles to release loads, even under tension. By attaching a rope or chain to the lever, you can open it from afar. Precision made in the U.S., these shackles operate smoothly even in harsh sea conditions or high temperatures. They're ideal for safely releasing everything from lifeboats to fuel tanks into the water or onto the ground.
    Warning: Not for overhead lifting.
    15-5 PH Stainless Steel—Made from one of the toughest types of stainless steel, these shackles undergo heat treatment for extra strength and withstand impact and wear. They also resist corrosion from chemicals and salt water.
    Opening
    Wd.
    Usable
    Lg.
    Wt. Cap.,
    lb.
    End Attachment
    Type
    Eye
    ID
    Each
    Lever-Release Shackles
     
    15-5 PH Stainless Steel
    5/16"2"1,300Eye3/8"00000000000000
    1/2"3 1/8"3,300Eye9/16"0000000000000
    3/4"4 9/16"7,000Eye13/16"000000000000000
     

    Tool Tether Attachments

    Tether almost any tool—these attachments add a ring for a lanyard connection. When used together with a lanyard and an anchor, they prevent tools from accidentally falling and hurting someone or damaging equipment below.
    Clip-On Attachment
    Image of ProductInUse. Front orientation. Tool Tether Attachments. Clip-On Attachment.
    Image of Product. Front orientation. Tool Tether Attachments. Clip-On Attachment.
    Image of Attribute. Front orientation. Contains Annotated.
    Clip-on attachments are for long-necked tools with wide ends, such as wrenches, pry bars, and hammers. The end of your tool needs to be wider than where the attachment point rests, so it won’t slip off. Made of stainless steel, they resist corrosion and are more durable than other attachments. They may slide up and down the tool as you use them. Add threadlocker to the pin to prevent loosening over time.
    ANSI/ISEA 121—They meet ANSI/ISEA 121 for design and performance to ensure safety when working at height.
    Wt. Cap.,
    lb.
    Ring Inside
    Wd.
    Ring Inside
    Lg.
    For No.
    of Tools
    Material
    Construction
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Rigid Ring
    150.4"0.75"1Stainless Steel
    		SolidANSI/ISEA 1212000000000000
    150.5"1"1Stainless Steel
    		SolidANSI/ISEA 121200000000000
    150.65"1.25"1Stainless Steel
    		SolidANSI/ISEA 1212000000000000
    150.8"1.5"1Stainless Steel
    		SolidANSI/ISEA 1212000000000000
     
    back to top