Material Material | Show |
---|
|
Material Material | Hide |
---|
|
For Slot Width For Slot Width |
---|
|
|
|
Threading Threading |
---|
|
T-Slot Framing Component T-Slot Framing Component |
---|
![]() | Fastener |
Nut Style Nut Style |
---|
![]() | Single |
Length Length |
---|
Color Color |
---|
![]() | Silver |
Fastener Head Style Fastener Head Style |
---|
![]() | Flanged Button |
Fastener Type Fastener Type |
---|
|
Mounting Fastener Drive Style Mounting FastenerDrive Style |
---|
|
Minimum Tensile Strength Minimum Tensile Strength |
---|
|
|
More
Designed to slide into T-slot tracks on machine tool tables, use these nuts to secure clamps and workpieces.
Fully threaded nuts allow a stud to extend beyond the bottom of the nut. Partially threaded nuts keep studs from traveling past the bottom of the nut and damaging your table.
Stainless steel nuts have excellent corrosion resistance. They are a good choice for use with stainless steel parts or in EDM applications.
For technical drawings and 3-D models, click on a part number.
Base | ||||||
---|---|---|---|---|---|---|
Thread Size | For Slot Wd. | Ht. | Wd. | O'all Ht. | Each | |
Fully Threaded | ||||||
18-8 Stainless Steel | ||||||
1/4"-20 | 5/16" | 3/16" | 1/2" | 1/4" | 000000000 | 00000 |
5/16"-18 | 3/8" | 7/32" | 5/8" | 13/32" | 000000000 | 0000 |
3/8"-16 | 7/16" | 7/32" | 3/4" | 1/2" | 000000000 | 0000 |
3/8"-16 | 1/2" | 1/4" | 7/8" | 5/8" | 000000000 | 0000 |
1/2"-13 | 9/16" | 11/32" | 7/8" | 3/4" | 000000000 | 0000 |
1/2"-13 | 5/8" | 3/8" | 1" | 3/4" | 000000000 | 0000 |
1/2"-13 | 5/8" | 7/16" | 1 1/8" | 3/4" | 000000000 | 0000 |
5/8"-11 | 11/16" | 15/32" | 1 1/8" | 1 1/8" | 000000000 | 00000 |
5/8"-11 | 11/16" | 15/32" | 1 1/4" | 1" | 000000000 | 00000 |
5/8"-11 | 3/4" | 15/32" | 1 1/4" | 3/4" | 000000000 | 00000 |
3/4"-10 | 13/16" | 9/16" | 1 1/4" | 1" | 000000000 | 00000 |
3/4"-10 | 1" | 5/8" | 1 5/8" | 1" | 000000000 | 00000 |
3/4"-10 | 1 1/16" | 11/16" | 1 5/8" | 1 1/8" | 000000000 | 00000 |
Partially Threaded | ||||||
18-8 Stainless Steel | ||||||
1/4"-20 | 5/16" | 3/16" | 1/2" | 1/4" | 000000000 | 0000 |
5/16"-18 | 3/8" | 7/32" | 5/8" | 13/32" | 000000000 | 0000 |
3/8"-16 | 7/16" | 7/32" | 3/4" | 1/2" | 000000000 | 0000 |
3/8"-16 | 1/2" | 1/4" | 7/8" | 5/8" | 000000000 | 0000 |
1/2"-13 | 9/16" | 11/32" | 7/8" | 3/4" | 000000000 | 0000 |
1/2"-13 | 5/8" | 3/8" | 1" | 3/4" | 000000000 | 0000 |
1/2"-13 | 5/8" | 7/16" | 1 1/8" | 3/4" | 000000000 | 0000 |
5/8"-11 | 11/16" | 15/32" | 1 1/8" | 1 1/8" | 000000000 | 00000 |
5/8"-11 | 11/16" | 15/32" | 1 1/4" | 1" | 000000000 | 00000 |
Base | Fully Threaded | |||||||
---|---|---|---|---|---|---|---|---|
Thread Size | Thread Pitch, mm | For Slot Wd., mm | Ht., mm | Wd., mm | O'all Ht., mm | Specifications Met | Each | |
18-8 Stainless Steel | ||||||||
M6 | 1 | 8 | 6 | 13 | 10 | DIN 508 | 000000000 | 00000 |
M8 | 1.25 | 10 | 6 | 15 | 12 | DIN 508 | 000000000 | 0000 |
M10 | 1.5 | 12 | 7 | 18 | 14 | DIN 508 | 000000000 | 0000 |
M12 | 1.75 | 14 | 8 | 22 | 16 | DIN 508 | 000000000 | 0000 |
M14 | 2 | 16 | 9 | 25 | 18 | DIN 508 | 000000000 | 0000 |
M16 | 2 | 18 | 10 | 28 | 20 | DIN 508 | 000000000 | 00000 |
For quicker setups than a separate T-slot nut and stud, slide these bolts into T-slot tracks on machine tool tables.
Round-neck bolts are also known as tugger bolts.
Stainless steel bolts have excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Head | Partially Threaded | |||||||
---|---|---|---|---|---|---|---|---|
Thread Lg. | Lg. | For Slot Wd. | Lg. | Wd. | Ht. | Min. Tensile Strength, psi | Each | |
Round Neck—18-8 Stainless Steel | ||||||||
3/8"-16 | ||||||||
5/8" | 1" | 3/8" | 3/4" | 11/16" | 3/16" | 90,000 | 000000000 | 000000 |
1 1/2" | 2" | 3/8" | 3/4" | 11/16" | 3/16" | 90,000 | 000000000 | 00000 |
1/2"-13 | ||||||||
1" | 1 1/2" | 1/2" | 1 1/8" | 7/8" | 9/32" | 90,000 | 000000000 | 00000 |
1 1/2" | 2" | 1/2" | 1 1/8" | 7/8" | 9/32" | 90,000 | 000000000 | 00000 |
1 1/2" | 3" | 1/2" | 1 1/8" | 7/8" | 9/32" | 90,000 | 000000000 | 00000 |
1 1/2" | 4" | 1/2" | 1 1/8" | 7/8" | 9/32" | 90,000 | 000000000 | 00000 |
5/8"-11 | ||||||||
1 1/2" | 3" | 5/8" | 1 5/16" | 1 3/32" | 11/32" | 90,000 | 000000000 | 00000 |
1 1/2" | 4" | 5/8" | 1 5/16" | 1 3/32" | 11/32" | 90,000 | 000000000 | 00000 |
2" | 2" | 5/8" | 1 5/16" | 1 3/32" | 11/32" | 90,000 | 000000000 | 00000 |
2" | 6" | 5/8" | 1 5/16" | 1 3/32" | 11/32" | 90,000 | 000000000 | 00000 |
3/4"-10 | ||||||||
2" | 4" | 3/4" | 1 1/2" | 1 1/4" | 7/16" | 90,000 | 000000000 | 00000 |
2" | 5" | 3/4" | 1 1/2" | 1 1/4" | 7/16" | 90,000 | 000000000 | 00000 |
2" | 6" | 3/4" | 1 1/2" | 1 1/4" | 7/16" | 90,000 | 000000000 | 00000 |
2" | 7" | 3/4" | 1 1/2" | 1 1/4" | 7/16" | 90,000 | 000000000 | 00000 |
Combine these setup studs with T-slot nuts, flanged nuts, setup clamps, or setup blocks to clamp and hold workpieces, vises, and other objects onto your fixturing table. Also known as double-ended studs, they have threads on both ends. One end threads into a T-slot nut or flanged nut inside the table. The other end passes through a setup clamp and secures with a nut and washer. The middle of the stud is unthreaded for gripping and adjusting the stud.
These setup studs are also used to align parts during assembly. One end of the stud is threaded into the part being added, and the other end fits into the mounting hole of the mating part. Because the studs don't have a head, you have the option to thread them into holes from either end, but they require a nut. You can adjust the distance between the mating parts by tightening and loosening the nut.
18-8 stainless steel studs resist corrosion in humid, damp, and washdown environments, and they're nearly as strong as steel studs.
316 stainless steel studs are the most corrosion-resistant studs we offer. They resist rusting even when exposed to salt water, chlorine solutions, and other chemicals.
Some of these studs meet DIN dimensional and material standards so designers and engineers know that they're compatible with other parts and tools.
For technical drawings and 3-D models, click on a part number.
Thread | |||||
---|---|---|---|---|---|
Lg. (A) | Lg. (B) | Lg. | Min. Tensile Strength, psi | Each | |
1/4"-20 | |||||
7/8" | 3/8" | 1 1/2" | 85,000 | 000000000 | 00000 |
1" | 3/8" | 2" | 85,000 | 000000000 | 0000 |
1" | 3/8" | 2 1/2" | 85,000 | 000000000 | 0000 |
1" | 1" | 3" | 85,000 | 000000000 | 0000 |
1" | 1" | 4" | 85,000 | 000000000 | 0000 |
1" | 1" | 5" | 85,000 | 000000000 | 0000 |
1 1/2" | 3/8" | 3" | 85,000 | 000000000 | 0000 |
1 3/4" | 3/8" | 4" | 85,000 | 000000000 | 0000 |
1 3/4" | 3/8" | 5" | 85,000 | 000000000 | 0000 |
2" | 3/8" | 6" | 85,000 | 000000000 | 0000 |
2" | 3/8" | 7" | 85,000 | 000000000 | 0000 |
2 1/2" | 3/8" | 8" | 85,000 | 000000000 | 0000 |
5/16"-18 | |||||
3/4" | 1/2" | 1 1/2" | 85,000 | 000000000 | 0000 |
1" | 1/2" | 2" | 85,000 | 000000000 | 0000 |
1" | 1/2" | 2 1/2" | 85,000 | 000000000 | 0000 |
1" | 1" | 3" | 85,000 | 000000000 | 0000 |
1 1/8" | 1 1/8" | 4" | 85,000 | 000000000 | 0000 |
1 1/2" | 1/2" | 3" | 85,000 | 000000000 | 0000 |
1 1/2" | 1/2" | 4" | 85,000 | 000000000 | 0000 |
1 3/4" | 1/2" | 5" | 85,000 | 000000000 | 0000 |
2" | 1/2" | 6" | 85,000 | 000000000 | 0000 |
2" | 1/2" | 7" | 85,000 | 000000000 | 0000 |
2 1/2" | 1/2" | 8" | 85,000 | 000000000 | 0000 |
3/8"-16 | |||||
5/8" | 5/8" | 1 1/2" | 85,000 | 000000000 | 0000 |
1" | 5/8" | 2" | 85,000 | 000000000 | 0000 |
1 1/8" | 1 1/8" | 3" | 85,000 | 000000000 | 0000 |
1 1/4" | 1 1/4" | 4" | 85,000 | 000000000 | 0000 |
1 1/4" | 1 1/4" | 5" | 85,000 | 000000000 | 0000 |
1 1/4" | 1 1/4" | 6" | 85,000 | 000000000 | 0000 |
1 1/4" | 1 1/4" | 8" | 85,000 | 000000000 | 0000 |
1 1/2" | 5/8" | 3" | 85,000 | 000000000 | 0000 |
1 1/2" | 5/8" | 4" | 85,000 | 000000000 | 0000 |
1 3/4" | 5/8" | 5" | 85,000 | 000000000 | 0000 |
2" | 5/8" | 6" | 85,000 | 000000000 | 0000 |
2 1/2" | 5/8" | 8" | 85,000 | 000000000 | 0000 |
1/2"-13 | |||||
5/8" | 5/8" | 1 1/2" | 85,000 | 000000000 | 0000 |
1" | 5/8" | 2" | 85,000 | 000000000 | 0000 |
1 1/2" | 3/4" | 3" | 85,000 | 000000000 | 0000 |
1 1/2" | 3/4" | 4" | 85,000 | 000000000 | 0000 |
1 1/2" | 1 1/2" | 4" | 85,000 | 000000000 | 0000 |
1 1/2" | 1 1/2" | 5" | 85,000 | 000000000 | 0000 |
1 1/2" | 1 1/2" | 6" | 85,000 | 000000000 | 0000 |
1 1/2" | 1 1/2" | 8" | 85,000 | 000000000 | 0000 |
1 3/4" | 3/4" | 5" | 85,000 | 000000000 | 0000 |
2" | 3/4" | 6" | 85,000 | 000000000 | 0000 |
2" | 3/4" | 7" | 85,000 | 000000000 | 0000 |
2 1/2" | 3/4" | 8" | 85,000 | 000000000 | 0000 |
2 1/2" | 3/4" | 9" | 85,000 | 000000000 | 0000 |
5/8"-11 | |||||
1" | 7/8" | 2 1/2" | 85,000 | 000000000 | 0000 |
1 1/2" | 7/8" | 3" | 85,000 | 000000000 | 0000 |
1 3/4" | 7/8" | 4" | 85,000 | 000000000 | 0000 |
1 3/4" | 1 3/4" | 4" | 85,000 | 000000000 | 0000 |
1 3/4" | 1 3/4" | 5" | 85,000 | 000000000 | 0000 |
1 3/4" | 1 3/4" | 6" | 85,000 | 000000000 | 0000 |
1 3/4" | 1 3/4" | 8" | 85,000 | 000000000 | 0000 |
3/4"-10 | |||||
1 3/4" | 1 3/4" | 4" | 100,000 | 000000000 | 0000 |
2" | 2" | 6" | 100,000 | 000000000 | 0000 |
2" | 2" | 10" | 100,000 | 000000000 | 00000 |
Thread | ||||||
---|---|---|---|---|---|---|
Lg. (A), mm | Lg. (B), mm | Lg., mm | Min. Tensile Strength, psi | Specifications Met | Each | |
M6 × 1mm | ||||||
10 | 8 | 23.5 | 70,000 | DIN 939 | 000000000 | 00000 |
14 | 8 | 27 | 70,000 | DIN 939 | 000000000 | 0000 |
18 | 8 | 32 | 70,000 | DIN 939 | 000000000 | 0000 |
18 | 8 | 37 | 70,000 | DIN 939 | 000000000 | 0000 |
18 | 8 | 42 | 70,000 | DIN 939 | 000000000 | 0000 |
18 | 8 | 47 | 70,000 | DIN 939 | 000000000 | 0000 |
18 | 8 | 57 | 70,000 | DIN 939 | 000000000 | 0000 |
18 | 8 | 67 | 70,000 | DIN 939 | 000000000 | 0000 |
20 | 20 | 50 | 85,000 | __ | 000000000 | 0000 |
27 | 27 | 80 | 85,000 | __ | 000000000 | 0000 |
31 | 31 | 110 | 85,000 | __ | 000000000 | 0000 |
M8 × 1.25mm | ||||||
14 | 10 | 30 | 70,000 | DIN 939 | 000000000 | 0000 |
19 | 10 | 35 | 70,000 | DIN 939 | 000000000 | 0000 |
20 | 20 | 50 | 85,000 | __ | 000000000 | 0000 |
22 | 8 | 43 | 70,000 | DIN 938 | 00000000 | 0000 |
22 | 8 | 48 | 70,000 | DIN 938 | 00000000 | 0000 |
22 | 10 | 40 | 70,000 | DIN 939 | 000000000 | 0000 |
22 | 10 | 45 | 70,000 | DIN 939 | 000000000 | 0000 |
22 | 10 | 55 | 70,000 | DIN 939 | 000000000 | 0000 |
22 | 10 | 60 | 70,000 | DIN 939 | 000000000 | 0000 |
22 | 10 | 65 | 70,000 | DIN 939 | 000000000 | 0000 |
22 | 10 | 70 | 70,000 | DIN 939 | 000000000 | 0000 |
27 | 27 | 80 | 85,000 | __ | 000000000 | 0000 |
31 | 31 | 110 | 85,000 | __ | 000000000 | 0000 |
M10 × 1.5mm | ||||||
13 | 10 | 30 | 70,000 | DIN 938 | 00000000 | 0000 |
13 | 12 | 32 | 70,000 | DIN 939 | 000000000 | 0000 |
18 | 10 | 35 | 70,000 | DIN 938 | 00000000 | 0000 |
18 | 12 | 37 | 70,000 | DIN 939 | 000000000 | 0000 |
20 | 20 | 50 | 85,000 | __ | 000000000 | 0000 |
23 | 10 | 40 | 70,000 | DIN 938 | 00000000 | 0000 |
23 | 12 | 42 | 70,000 | DIN 939 | 000000000 | 0000 |
26 | 10 | 45 | 70,000 | DIN 938 | 00000000 | 0000 |
26 | 10 | 50 | 70,000 | DIN 938 | 00000000 | 0000 |
26 | 10 | 55 | 70,000 | DIN 938 | 00000000 | 0000 |
26 | 10 | 60 | 70,000 | DIN 938 | 00000000 | 0000 |
26 | 10 | 65 | 70,000 | DIN 938 | 00000000 | 0000 |
26 | 10 | 70 | 70,000 | DIN 938 | 00000000 | 0000 |
26 | 12 | 47 | 70,000 | DIN 939 | 000000000 | 0000 |
26 | 12 | 57 | 70,000 | DIN 939 | 000000000 | 0000 |
26 | 12 | 62 | 70,000 | DIN 939 | 000000000 | 0000 |
27 | 27 | 80 | 85,000 | __ | 000000000 | 0000 |
35 | 35 | 125 | 85,000 | __ | 000000000 | 0000 |
M12 × 1.75mm | ||||||
18 | 12 | 37 | 70,000 | DIN 938 | 00000000 | 0000 |
20 | 20 | 50 | 85,000 | __ | 000000000 | 0000 |
23 | 12 | 42 | 70,000 | DIN 938 | 00000000 | 0000 |
27 | 27 | 80 | 85,000 | __ | 000000000 | 0000 |
28 | 12 | 47 | 70,000 | DIN 938 | 00000000 | 0000 |
30 | 12 | 52 | 70,000 | DIN 938 | 00000000 | 0000 |
30 | 12 | 57 | 70,000 | DIN 938 | 00000000 | 0000 |
30 | 12 | 62 | 70,000 | DIN 938 | 00000000 | 0000 |
30 | 12 | 67 | 70,000 | DIN 938 | 00000000 | 0000 |
30 | 12 | 72 | 70,000 | DIN 938 | 00000000 | 0000 |
39 | 39 | 125 | 85,000 | __ | 000000000 | 0000 |
M14 × 2mm | ||||||
20 | 20 | 60 | 85,000 | __ | 000000000 | 0000 |
35 | 35 | 100 | 85,000 | __ | 000000000 | 0000 |
47 | 47 | 160 | 85,000 | __ | 000000000 | 0000 |
M16 × 2mm | ||||||
21 | 21 | 80 | 85,000 | __ | 000000000 | 0000 |
27 | 16 | 51 | 70,000 | DIN 938 | 00000000 | 0000 |
32 | 16 | 56 | 70,000 | DIN 938 | 00000000 | 00000 |
37 | 16 | 61 | 70,000 | DIN 938 | 00000000 | 00000 |
38 | 16 | 66 | 70,000 | DIN 938 | 00000000 | 00000 |
38 | 16 | 71 | 70,000 | DIN 938 | 00000000 | 00000 |
38 | 16 | 76 | 70,000 | DIN 938 | 00000000 | 00000 |
38 | 16 | 81 | 70,000 | DIN 938 | 00000000 | 00000 |
38 | 16 | 86 | 70,000 | DIN 938 | 00000000 | 00000 |
38 | 16 | 91 | 70,000 | DIN 938 | 00000000 | 00000 |
47 | 47 | 110 | 85,000 | __ | 000000000 | 0000 |
47 | 47 | 175 | 85,000 | __ | 000000000 | 0000 |
M20 × 2.5mm | ||||||
36 | 20 | 65 | 70,000 | DIN 938 | 00000000 | 00000 |
41 | 20 | 70 | 70,000 | DIN 938 | 00000000 | 00000 |
46 | 20 | 75 | 70,000 | DIN 938 | 00000000 | 00000 |
46 | 20 | 80 | 70,000 | DIN 938 | 00000000 | 00000 |
46 | 20 | 85 | 70,000 | DIN 938 | 00000000 | 00000 |
46 | 20 | 90 | 70,000 | DIN 938 | 00000000 | 00000 |
Thread | ||||||
---|---|---|---|---|---|---|
Lg. (A), mm | Lg. (B), mm | Lg., mm | Min. Tensile Strength, psi | Specifications Met | Each | |
M6 × 1mm | ||||||
11 | 8 | 23.5 | 70,000 | DIN 939 | 00000000 | 00000 |
15 | 8 | 27 | 70,000 | DIN 939 | 00000000 | 0000 |
18 | 8 | 32 | 70,000 | DIN 939 | 00000000 | 0000 |
18 | 8 | 37 | 70,000 | DIN 939 | 00000000 | 0000 |
18 | 8 | 42 | 70,000 | DIN 939 | 00000000 | 0000 |
18 | 8 | 47 | 70,000 | DIN 939 | 00000000 | 0000 |
18 | 8 | 52 | 70,000 | DIN 939 | 00000000 | 0000 |
18 | 8 | 57 | 70,000 | DIN 939 | 00000000 | 0000 |
18 | 8 | 67 | 70,000 | DIN 939 | 00000000 | 0000 |
M8 × 1.25mm | ||||||
14 | 10 | 30 | 70,000 | DIN 939 | 00000000 | 0000 |
19 | 10 | 35 | 70,000 | DIN 939 | 00000000 | 0000 |
22 | 10 | 40 | 70,000 | DIN 939 | 00000000 | 0000 |
22 | 10 | 45 | 70,000 | DIN 939 | 00000000 | 0000 |
22 | 10 | 50 | 70,000 | DIN 939 | 00000000 | 0000 |
22 | 10 | 55 | 70,000 | DIN 939 | 00000000 | 0000 |
22 | 10 | 60 | 70,000 | DIN 939 | 00000000 | 0000 |
22 | 10 | 65 | 70,000 | DIN 939 | 00000000 | 0000 |
22 | 10 | 70 | 70,000 | DIN 939 | 00000000 | 0000 |
M10 × 1.5mm | ||||||
13 | 12 | 32 | 70,000 | DIN 939 | 00000000 | 0000 |
18 | 12 | 37 | 70,000 | DIN 939 | 00000000 | 0000 |
23 | 12 | 42 | 70,000 | DIN 939 | 00000000 | 0000 |
26 | 12 | 47 | 70,000 | DIN 939 | 00000000 | 0000 |
26 | 12 | 52 | 70,000 | DIN 939 | 00000000 | 0000 |
26 | 12 | 57 | 70,000 | DIN 939 | 00000000 | 0000 |
26 | 12 | 62 | 70,000 | DIN 939 | 00000000 | 0000 |
Also known as tap-end and fixture studs, these rods have friction-fit threads on one end to resist loosening and standard threads on the other end for attaching a nut. They are ideal for machining applications where vibration can loosen clamps. Remove studs with pliers to reuse them.
Inch studs have a Class 5 thread fit on the friction-fit end and Class 2A thread fit on the machine-threaded end.
For technical drawings and 3-D models, click on a part number.
Thread Lg. | 18-8 Stainless Steel | ||||
---|---|---|---|---|---|
Lg. | Class 5 End (A) | Class 2A End (B) | Min. Tensile Strength, psi | Each | |
3/8"-16 | |||||
1 1/4" | 1/2" | 5/8" | 80,000 | 000000000 | 00000 |
1 1/2" | 1/2" | 5/8" | 80,000 | 000000000 | 0000 |
1 3/4" | 1/2" | 5/8" | 80,000 | 000000000 | 0000 |
2" | 1/2" | 3/4" | 80,000 | 000000000 | 0000 |
2 1/4" | 1/2" | 3/4" | 80,000 | 000000000 | 0000 |
2 1/2" | 1/2" | 3/4" | 80,000 | 000000000 | 0000 |
3" | 1/2" | 3/4" | 80,000 | 000000000 | 0000 |
7/16"-14 | |||||
1 1/2" | 9/16" | 5/8" | 80,000 | 000000000 | 0000 |
2" | 9/16" | 3/4" | 80,000 | 000000000 | 0000 |
2 1/4" | 9/16" | 3/4" | 80,000 | 000000000 | 0000 |
2 1/2" | 9/16" | 3/4" | 80,000 | 000000000 | 0000 |
3" | 9/16" | 7/8" | 80,000 | 000000000 | 0000 |
1/2"-13 | |||||
1 1/2" | 1/2" | 3/4" | 80,000 | 000000000 | 0000 |
1 3/4" | 5/8" | 3/4" | 80,000 | 000000000 | 0000 |
2" | 5/8" | 3/4" | 80,000 | 000000000 | 0000 |
2 1/4" | 5/8" | 3/4" | 80,000 | 000000000 | 0000 |
2 1/2" | 5/8" | 3/4" | 80,000 | 000000000 | 0000 |
3" | 3/4" | 7/8" | 80,000 | 000000000 | 0000 |
4" | 3/4" | 1 1/4" | 80,000 | 000000000 | 0000 |
5" | 7/8" | 1 1/4" | 80,000 | 000000000 | 0000 |
5/8"-11 | |||||
2" | 3/4" | 7/8" | 80,000 | 000000000 | 0000 |
2 1/4" | 3/4" | 7/8" | 80,000 | 000000000 | 0000 |
2 1/2" | 3/4" | 7/8" | 80,000 | 000000000 | 0000 |
3" | 7/8" | 1" | 80,000 | 000000000 | 0000 |
3/4"-10 | |||||
2 1/2" | 7/8" | 7/8" | 80,000 | 000000000 | 0000 |
3" | 7/8" | 1" | 80,000 | 000000000 | 0000 |
Screws and nuts secure brackets and other accessories to rails.
For technical drawings and 3-D models, click on a part number.
End-feed fasteners slide into the end of the rail to attach components.
For Rail Ht. | Mounting | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Single | Double and Quad | Triple | Color | Material | Hole Location | Fastener Thread Size | Fastener Thread Lg. | Pkg. Qty. | Pkg. | |
Single Nut with Flanged-Button Head | ||||||||||
1 1/2" | 3" | 4 1/2" | Silver | 302 Stainless Steel | Offset | 5/16"-18 | 5/8" | 4 | 000000000 | 00000 |
20mm | 40mm | __ | Silver | 304 Stainless Steel | Offset | M5 | 8mm | 4 | 00000000 | 0000 |
30mm | 60mm | __ | Silver | 304 Stainless Steel | Offset | M6 | 16mm | 4 | 00000000 | 0000 |
40mm | 80mm | __ | Silver | 304 Stainless Steel | Offset | M8 | 16mm | 4 | 00000000 | 0000 |
45mm | 90mm | __ | Silver | 304 Stainless Steel | Offset | M8 | 16mm | 4 | 00000000 | 0000 |
Build test fixtures, prototypes, and other small structures with this miniature version of T-slotted framing and fittings. The framing has continuous T-slots for attaching fittings with the included mounting fasteners.
For technical drawings and 3-D models, click on a part number.
Fastener Type | Material | Includes | Pkg. Qty. | Pkg. | |
Button Head Cap Screw | 18-8 Stainless Steel | Lock Washers | 40 | 0000000 | 00000 |