When your application does not require a smooth interior, this tubing is an economical choice.

A titanium additive gives this tubing excellent strength and superior corrosion resistance. It meets MIL-T-8808.

This tubing comes cleaned and capped to prevent moisture and dirt from contaminating the inside.

A thin layer of silicon on the interior provides a smooth surface and offers protection against corrosive gases.

This tubing withstands high pressures up to 13,700 psi. It is also known as capillary tubing.

This tubing has a 90° bend that holds its shape.

The interior and exterior are polished to a high-luster finish to resist particle buildup and allow for easy cleaning.

This premium-grade tubing is polished to a 20 Ra or 15 Ra finish on the inside to reduce particle buildup and allow for easy cleaning.

A 316 stainless steel body gives these fittings the best corrosion resistance of all our metal push-to-connect tube fittings.

Made of stainless steel, these couplings stand up to wet environments.

Fittings are 304 stainless steel, which has excellent chemical resistance and is more durable than plastic.

Quick-disconnect couplings consist of a plug and a socket that join with a latch so you can easily connect and disconnect your line. Use in applications up to 150 psi.

For applications that require an extra level of cleanliness, these fittings are individually bagged to prevent contamination.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Use at pressures up to 4,300 psi.

Connect quick-clamp sanitary tube fittings—also known as aseptic fittings—for a fast and easy way to access your line.

Connect extra-support quick-clamp fittings for a fast and easy way to access your line.

Also known as KF, QF, and NW fittings, these fittings are for high-vacuum applications, such as vacuum coating and heat treating, leak testing, and analyzing gases.

The thick walls of these fittings can withstand more than twice the pressure of standard compression fittings.

The male pipe threads on these fittings have a sealant applied for extra protection against leaks.

The threads on the tube end of these fittings are Class 3A or 3B and adhere to tighter tolerances than other 37° flared fittings.

Polished to a 15 Ra and under finish, these fittings have a mirror smooth interior. They are also known as ultra-high-purity fittings.

Fittings have two anti-torque rings that compress the gasket to prevent rotation and reduce particle generation in high-vibration applications.

An alternative to bolt-together fittings, these handle larger tube OD sizes and have higher vacuum ratings than quick-clamp fittings. Also known as ISO-K high-vacuum fittings, the clamps have claws that grab hold of fittings with flanged ends.

The flat face of the fitting connects to a tube adapter so you can slide the tubing and fitting sideways to disconnect in cramped spaces. They are also known zero-clearance fittings.

Create access points in ultra-high-vacuum lines or chambers by bolting two same-size flanges together with a copper gasket between them. The flanges’ sharp edges dig into the copper gasket and form an extremely tight seal, which means they handle higher vacuum pressures than other high-vacuum fittings with rubber gaskets.

Transfer liquids and gasses into high-vacuum chambers with these assembled fittings, also known as feedthroughs.

Press these fittings onto stainless steel pipe using a crimping tool for a permanent, leak-tight connection that's faster than threading or welding and doesn't require heat.

Typically used with thick-wall and high-pressure stainless steel unthreaded pipe fittings.

Typically used with low-pressure stainless steel threaded pipe fittings.

Typically used with medium- to high-pressure stainless steel threaded pipe fittings.

Form elbows and bends with this hose and it will hold its shape without support.

If you need to access your line frequently, the fittings on this hose connect and disconnect quickly.

Run natural and LP gas through this heavy duty hose that's flexible enough for routing through walls and ceilings.

The Yor-Lok fitting is also known as an instrumentation fitting. It has two sleeves (double ferrules) that bite into metal tubing for a strong seal.

The fittings are also known as an instrumentation fittings. They have two sleeves (double ferrules) that bite into metal tubing for a strong seal.

More flexible than rigid stainless steel tubing, this hose allows you to link high-vacuum components that are misaligned. Also known as bellows. Equipped with a claw-clamp (ISO-K) fitting on each end, this hose connects to large components with fittings starting at trade number 63.

Polished to either a brushed or mirror-like finish, this material is often used to fabricate decorative enclosures and industrial workstations.

The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.

The corrugated construction gives this sleeving impact and abrasion resistance similar to conduit, but with more flexibility.

Also known as FMC, this conduit offers the crush resistance of metal combined with flexibility to handle bends in tight spaces.

Join pieces of conduit.

The most corrosion-resistant thin-wall conduit we offer, use this along walls and ceilings in food-processing and chemical plants.

Attach conduit to a knockout in an outlet box or enclosure.

Join pieces of conduit.

Also known as conduit bodies, these ports provide access to wire and cable inside metal conduit for pulling, splicing, and maintenance. They are also used to change the direction of a run.

Use hinges to add doors, lids, and machine guards to T-slotted framing.

Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.

Up to two times the height of regular strut channel, this high-profile channel is stronger than regular strut channel.

A spring plus serrated grooves that grip the lip of the channel provide a more secure hold than standard strut channel nuts.

In addition to serrated grooves for gripping the lip of the channel, these nuts have wings for easy positioning.

Keep hardware centered in the strut channel slot.

Use with hex nuts to connect threaded rod.