How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Yor-Lok Fittings for Stainless Steel Tubing

A nut with two sleeves (ferrules) gives these fittings extra gripping power. The sleeves bite into tubing as you tighten the nut, creating a strong seal. Also known as instrumentation fittings, they are made to tight tolerances for use in high-precision applications. They are compatible with Swagelok®, Let-Lok, and A-Lok fittings.
316 stainless steel fittings have excellent corrosion resistance.


- For Use With: Air, Cutting Oil, Fuel Oil, Gasoline, Hydraulic Fluid, Mineral Oil, Natural Gas, Steam, Water
- Tubing: Use with welded or seamless 304/304L or 316/316L stainless steel that meets ASTM A213, ASTM A249, or ASTM A269
Caps for tubing have a nut and a sleeve so you can close off the end of your tubing in place of a fitting. Caps for fittings replace the nut and sleeve of an existing fitting.
For Tube | ||||||
---|---|---|---|---|---|---|
OD | Wall Thick. | Material | Max. Pressure | Temp. Range, °F | Each | |
For Tubing | ||||||
1/16" | 0.02" | 316 Stainless Steel | 9,000 psi @ 72° F | -420° to 1200° | 00000000 | 000000 |
1/8" | 0.035" | 316 Stainless Steel | 6,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
3/16" | 0.035" | 316 Stainless Steel | 5,500 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
1/4" | 0.035" | 316 Stainless Steel | 4,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
5/16" | 0.035" | 316 Stainless Steel | 3,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
3/8" | 0.035" | 316 Stainless Steel | 2,500 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
1/2" | 0.035" | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
5/8" | 0.049" | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
3/4" | 0.049" | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
1" | 0.065" | 316 Stainless Steel | 1,500 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
3mm | 0.5mm | 316 Stainless Steel | 9,700 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
4mm | 1mm | 316 Stainless Steel | 3,500 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
6mm | 1mm | 316 Stainless Steel | 4,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
8mm | 1mm | 316 Stainless Steel | 3,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
10mm | 0.5mm | 316 Stainless Steel | 2,500 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
12mm | 0.5mm | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
14mm | 1 to 2 mm | 316 Stainless Steel | 2,300 psi @ 72° F | -420° to 1200° | 0000000 | 00000 |
For Fitting | ||||||
1/16" | 0.02" | 316 Stainless Steel | 9,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
1/8" | 0.035" | 316 Stainless Steel | 6,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
3/16" | 0.035" | 316 Stainless Steel | 5,500 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
1/4" | 0.035" | 316 Stainless Steel | 4,000 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
5/16" | 0.035" | 316 Stainless Steel | 3,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
3/8" | 0.035" | 316 Stainless Steel | 2,500 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
1/2" | 0.035" | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
5/8" | 0.049" | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
3/4" | 0.049" | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
1" | 0.065" | 316 Stainless Steel | 1,500 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
3mm | 0.5mm | 316 Stainless Steel | 9,700 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
4mm | 1mm | 316 Stainless Steel | 3,500 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
6mm | 1mm | 316 Stainless Steel | 4,000 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
8mm | 1mm | 316 Stainless Steel | 3,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
10mm | 0.5mm | 316 Stainless Steel | 2,500 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
12mm | 0.5mm | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |

Use these nuts with Yor-Lok sleeves and fittings to create an extra-strong seal on stainless steel tubing. They are 316 stainless steel for excellent corrosion resistance.
For Tube | ||||||
---|---|---|---|---|---|---|
OD | Wall Thick. | Nut Material | Max. Pressure | Temp. Range, °F | Each | |
1/16" | 0.02" | 316 Stainless Steel | 9,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
1/8" | 0.035" | 316 Stainless Steel | 6,000 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
3/16" | 0.035" | 316 Stainless Steel | 5,500 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
1/4" | 0.035" | 316 Stainless Steel | 4,000 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
5/16" | 0.035" | 316 Stainless Steel | 3,000 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
3/8" | 0.035" | 316 Stainless Steel | 2,500 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
1/2" | 0.035" | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
5/8" | 0.049" | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
3/4" | 0.049" | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
1" | 0.065" | 316 Stainless Steel | 1,500 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
3mm | 0.5mm | 316 Stainless Steel | 4,000 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
4mm | 1mm | 316 Stainless Steel | 3,500 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
6mm | 1mm | 316 Stainless Steel | 4,000 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
8mm | 1mm | 316 Stainless Steel | 3,000 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
10mm | 0.5mm | 316 Stainless Steel | 2,500 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
12mm | 0.5mm | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 0000 |
14mm | 1.5mm | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |


Couple these sleeves with Yor-Lok nuts and fittings to create an extra-strong seal on stainless steel tubing. Sleeves are 316 stainless steel for excellent corrosion resistance. They are also known as ferrules.
For Tube | Front Sleeve | Back Sleeve | |||||||
---|---|---|---|---|---|---|---|---|---|
OD | Wall Thick. | Sleeve Material | Lg. | No. Included | Lg. | No. Included | Max. Pressure | Each | |
Sleeves | |||||||||
1/16" | 0.02" | 316 Stainless Steel | 3/32" | 1 | 1/16" | 1 | 9,000 psi @ 72° F | 00000000 | 00000 |
1/8" | 0.035" | 316 Stainless Steel | 3/16" | 1 | 3/32" | 1 | 6,000 psi @ 72° F | 00000000 | 0000 |
3/16" | 0.035" | 316 Stainless Steel | 3/16" | 1 | 3/32" | 1 | 5,500 psi @ 72° F | 00000000 | 0000 |
1/4" | 0.035" | 316 Stainless Steel | 3/16" | 1 | 3/32" | 1 | 4,000 psi @ 72° F | 00000000 | 0000 |
5/16" | 0.035" | 316 Stainless Steel | 3/16" | 1 | 3/32" | 1 | 3,000 psi @ 72° F | 00000000 | 0000 |
3/8" | 0.035" | 316 Stainless Steel | 3/16" | 1 | 3/32" | 1 | 2,500 psi @ 72° F | 00000000 | 0000 |
1/2" | 0.035" | 316 Stainless Steel | 19/64" | 1 | 5/32" | 1 | 2,000 psi @ 72° F | 00000000 | 0000 |
5/8" | 0.049" | 316 Stainless Steel | 19/64" | 1 | 5/32" | 1 | 2,000 psi @ 72° F | 00000000 | 0000 |
3/4" | 0.049" | 316 Stainless Steel | 19/64" | 1 | 5/32" | 1 | 2,000 psi @ 72° F | 00000000 | 0000 |
1" | 0.065" | 316 Stainless Steel | 3/8" | 1 | 13/64" | 1 | 1,500 psi @ 72° F | 00000000 | 00000 |
3mm | 0.5mm | 316 Stainless Steel | 5mm | 1 | 3mm | 1 | 4,000 psi @ 72° F | 00000000 | 0000 |
4mm | 1mm | 316 Stainless Steel | 5mm | 1 | 3mm | 1 | 3,500 psi @ 72° F | 00000000 | 0000 |
6mm | 1mm | 316 Stainless Steel | 5mm | 1 | 3mm | 1 | 4,000 psi @ 72° F | 00000000 | 0000 |
8mm | 1mm | 316 Stainless Steel | 5mm | 1 | 3mm | 1 | 3,000 psi @ 72° F | 00000000 | 0000 |
10mm | 0.5mm | 316 Stainless Steel | 5mm | 1 | 3mm | 1 | 2,500 psi @ 72° F | 00000000 | 0000 |
12mm | 0.5mm | 316 Stainless Steel | 7mm | 1 | 4mm | 1 | 2,000 psi @ 72° F | 00000000 | 0000 |
14mm | 1.5mm | 316 Stainless Steel | 7mm | 1 | 4mm | 1 | 2,000 psi @ 72° F | 00000000 | 00000 |
Sleeves with Dispenser | |||||||||
1/8" | 0.035" | 316 Stainless Steel | 3/16" | 10 | 3/32" | 10 | 6,000 psi @ 72° F | 00000000 | 00000 |
3/16" | 0.035" | 316 Stainless Steel | 3/16" | 10 | 3/32" | 10 | 5,500 psi @ 72° F | 00000000 | 00000 |
1/4" | 0.035" | 316 Stainless Steel | 3/16" | 10 | 7/64" | 10 | 4,000 psi @ 72° F | 00000000 | 00000 |
5/16" | 0.035" | 316 Stainless Steel | 3/16" | 10 | 7/64" | 10 | 3,000 psi @ 72° F | 00000000 | 00000 |
3/8" | 0.035" | 316 Stainless Steel | 3/16" | 10 | 7/64" | 10 | 2,500 psi @ 72° F | 00000000 | 00000 |
1/2" | 0.035" | 316 Stainless Steel | 9/32" | 10 | 5/32" | 10 | 2,000 psi @ 72° F | 00000000 | 00000 |
5/8" | 0.049" | 316 Stainless Steel | 9/32" | 10 | 5/32" | 10 | 2,000 psi @ 72° F | 00000000 | 00000 |
3/4" | 0.049" | 316 Stainless Steel | 9/32" | 10 | 5/32" | 10 | 1,900 psi @ 72° F | 00000000 | 00000 |
1" | 0.065" | 316 Stainless Steel | 3/8" | 10 | 13/64" | 10 | 1,500 psi @ 72° F | 00000000 | 000000 |

Save time installing sleeves and nuts—these sets come oriented in the correct direction and order on a dispenser. To install them, slide off a set and place it on your tubing. Each front sleeve, back sleeve, and nut is made of 316 stainless steel for excellent corrosion resistance. Five sets of sleeves and nuts come on each dispenser. Sleeves are also known as ferrules.
For Tube | Front Sleeve | Back Sleeve | Nut | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
OD | Wall Thick. | Material | Lg. | No. Included | Lg. | No. Included | Lg. | No. Included | Max. Pressure | Each | |
Sets with Dispenser | |||||||||||
1/8" | 0.035" | 316 Stainless Steel | 3/16" | 5 | 3/32" | 5 | 15/32" | 5 | 6,000 psi @ 72° F | 0000000 | 000000 |
3/16" | 0.035" | 316 Stainless Steel | 3/16" | 5 | 3/32" | 5 | 15/32" | 5 | 5,500 psi @ 72° F | 0000000 | 00000 |
1/4" | 0.035" | 316 Stainless Steel | 3/16" | 5 | 7/64" | 5 | 1/2" | 5 | 4,000 psi @ 72° F | 0000000 | 00000 |
5/16" | 0.035" | 316 Stainless Steel | 3/16" | 5 | 7/64" | 5 | 17/32" | 5 | 3,000 psi @ 72° F | 0000000 | 00000 |
3/8" | 0.035" | 316 Stainless Steel | 3/16" | 5 | 7/64" | 5 | 9/16" | 5 | 2,500 psi @ 72° F | 0000000 | 00000 |
1/2" | 0.035" | 316 Stainless Steel | 9/32" | 5 | 5/32" | 5 | 11/16" | 5 | 2,000 psi @ 72° F | 0000000 | 00000 |
5/8" | 0.049" | 316 Stainless Steel | 9/32" | 5 | 5/32" | 5 | 11/16" | 5 | 2,000 psi @ 72° F | 0000000 | 00000 |
3/4" | 0.049" | 316 Stainless Steel | 9/32" | 5 | 5/32" | 5 | 11/16" | 5 | 1,900 psi @ 72° F | 0000000 | 000000 |
1" | 0.065" | 316 Stainless Steel | 3/8" | 5 | 13/64" | 5 | 13/16" | 5 | 1,500 psi @ 72° F | 0000000 | 000000 |
3mm | 0.8mm | 316 Stainless Steel | 5mm | 5 | 3mm | 5 | 12mm | 5 | 4,000 psi @ 72° F | 0000000 | 00000 |
4mm | 1mm | 316 Stainless Steel | 5mm | 5 | 3mm | 5 | 12mm | 5 | 3,500 psi @ 72° F | 0000000 | 00000 |
6mm | 1mm | 316 Stainless Steel | 5mm | 5 | 3mm | 5 | 13mm | 5 | 4,000 psi @ 72° F | 0000000 | 00000 |
8mm | 1mm | 316 Stainless Steel | 5mm | 5 | 3mm | 5 | 14mm | 5 | 3,000 psi @ 72° F | 0000000 | 00000 |
10mm | 1mm | 316 Stainless Steel | 5mm | 5 | 3mm | 5 | 15mm | 5 | 2,500 psi @ 72° F | 0000000 | 00000 |
12mm | 1mm | 316 Stainless Steel | 7mm | 5 | 4mm | 5 | 17mm | 5 | 2,000 psi @ 72° F | 0000000 | 00000 |

PTFE sleeves are plastic instead of stainless steel, so they won’t damage tubing.
For Tube OD | Sleeve Material | Max. Pressure | Temp. Range, °F | Each | |
1/16" | PTFE Plastic | Not Rated | -65° to 350° | 00000000 | 000000 |
1/8" | PTFE Plastic | Not Rated | -65° to 350° | 00000000 | 0000 |
3/16" | PTFE Plastic | Not Rated | -65° to 350° | 00000000 | 00000 |
1/4" | PTFE Plastic | Not Rated | -65° to 350° | 00000000 | 0000 |
5/16" | PTFE Plastic | Not Rated | -65° to 350° | 00000000 | 0000 |
3/8" | PTFE Plastic | Not Rated | -65° to 350° | 00000000 | 0000 |
1/2" | PTFE Plastic | Not Rated | -65° to 350° | 00000000 | 0000 |
5/8" | PTFE Plastic | Not Rated | -65° to 350° | 00000000 | 00000 |
3/4" | PTFE Plastic | Not Rated | -65° to 350° | 00000000 | 00000 |
1" | PTFE Plastic | Not Rated | -65° to 350° | 00000000 | 00000 |


Tube supports are recommended for soft plastic tubing to prevent the tube from collapsing.
For Tube | ||||||
---|---|---|---|---|---|---|
OD | ID | Tube Support Material | Tube Support Style | Temp. Range, °F | Each | |
3/16" | 1/8" | 316 Stainless Steel | Smooth | -420° to 1200° | 00000000 | 000000 |
1/4" | 1/8" | 316 Stainless Steel | Smooth | -420° to 1200° | 00000000 | 0000 |
5/16" | 1/8" | 316 Stainless Steel | Barbed | -420° to 1200° | 00000000 | 0000 |
5/16" | 3/16" | 316 Stainless Steel | Barbed | -420° to 1200° | 00000000 | 0000 |
5/16" | 1/4" | 316 Stainless Steel | Smooth | -420° to 1200° | 00000000 | 00000 |
3/8" | 1/4" | 316 Stainless Steel | Smooth | -420° to 1200° | 00000000 | 0000 |
1/2" | 1/4" | 316 Stainless Steel | Smooth | -420° to 1200° | 00000000 | 00000 |
5/8" | 3/8" | 316 Stainless Steel | Smooth | -420° to 1200° | 00000000 | 00000 |
3/4" | 1/2" | 316 Stainless Steel | Smooth | -420° to 1200° | 00000000 | 00000 |
3/4" | 5/8" | 316 Stainless Steel | Barbed | -420° to 1200° | 00000000 | 00000 |
1" | 3/4" | 316 Stainless Steel | Smooth | -420° to 1200° | 00000000 | 00000 |
6mm | 4mm | 316 Stainless Steel | Barbed | -420° to 1200° | 00000000 | 0000 |
8mm | 6mm | 316 Stainless Steel | Barbed | -420° to 1200° | 00000000 | 0000 |
10mm | 8mm | 316 Stainless Steel | Barbed | -420° to 1200° | 00000000 | 0000 |
12mm | 8mm | 316 Stainless Steel | Barbed | -420° to 1200° | 00000000 | 0000 |
12mm | 10mm | 316 Stainless Steel | Barbed | -420° to 1200° | 00000000 | 0000 |
Compression Fittings for Stainless Steel Tubing


- For Use With: Air, Hydraulic Fluid, Water
- Temperature Range: -420° to 1200° F
- Tubing: Use with welded or seamless 304 or 316 stainless steel that meets ASTM A269
- Specifications Met: SAE J514
For Tube | |||||
---|---|---|---|---|---|
OD | Wall Thick. | Material | Max. Pressure | Each | |
1/8" | 0.028" | 316 Stainless Steel | 4,300 psi @ 72° F | 000000000 | 000000 |
1/4" | 0.035" | 316 Stainless Steel | 4,000 psi @ 72° F | 000000000 | 00000 |
3/8" | 0.035" | 316 Stainless Steel | 2,600 psi @ 72° F | 000000000 | 00000 |
1/2" | 0.049" | 316 Stainless Steel | 1,900 psi @ 72° F | 000000000 | 00000 |
5/8" | 0.058" | 316 Stainless Steel | 2,300 psi @ 72° F | 000000000 | 00000 |
3/4" | 0.065" | 316 Stainless Steel | 1,900 psi @ 72° F | 000000000 | 00000 |
1" | 0.065" | 316 Stainless Steel | 1,900 psi @ 72° F | 000000000 | 000000 |

- For Use With: Air, Hydraulic Fluid, Water
- Temperature Range: -420° to 1200° F
- Tubing: Use with seamless 304 or 316 stainless steel that meets ASTM A269
- Specifications Met: SAE J514
Plugs insert into the end of a fitting.

- For Use With: See table
- Temperature Range: See table
- Tubing: See table
- Specifications Met: See table
For Tube | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
OD | Wall Thick. | Nut Material | Max. Pressure | For Use With | Temp. Range, °F | For Tube Material | For Tube Specifications Met | For Tube Fabrication | Specifications Met | Each | |
1/8" | 0.028" | 316 Stainless Steel | 4,300 psi @ 72° F | Air, Hydraulic Fluid, Water | -420° to 1200° | 304 Stainless Steel, 316 Stainless Steel | ASTM A269 | Seamless, Welded | SAE J514 | 000000000 | 00000 |
1/4" | 0.035" | 316 Stainless Steel | 4,000 psi @ 72° F | Air, Hydraulic Fluid, Water | -420° to 1200° | 304 Stainless Steel, 316 Stainless Steel | ASTM A269 | Seamless, Welded | SAE J514 | 000000000 | 0000 |
3/8" | 0.035" | 316 Stainless Steel | 2,600 psi @ 72° F | Air, Hydraulic Fluid, Water | -420° to 1200° | 304 Stainless Steel, 316 Stainless Steel | ASTM A269 | Seamless, Welded | SAE J514 | 000000000 | 0000 |
1/2" | 0.049" | 316 Stainless Steel | 1,900 psi @ 72° F | Air, Hydraulic Fluid, Water | -420° to 1200° | 304 Stainless Steel, 316 Stainless Steel | ASTM A269 | Seamless, Welded | SAE J514 | 000000000 | 0000 |
5/8" | 0.058" | 316 Stainless Steel | 2,300 psi @ 72° F | Air, Hydraulic Fluid, Water | -420° to 1200° | 304 Stainless Steel, 316 Stainless Steel | ASTM A269 | Seamless, Welded | SAE J514 | 000000000 | 00000 |
3/4" | 0.065" | 316 Stainless Steel | 1,900 psi @ 72° F | Air, Hydraulic Fluid, Water | -420° to 1200° | 304 Stainless Steel, 316 Stainless Steel | ASTM A269 | Seamless, Welded | SAE J514 | 000000000 | 00000 |
1" | 0.065" | 316 Stainless Steel | 1,900 psi @ 72° F | Air, Hydraulic Fluid, Water | -420° to 1200° | 304 Stainless Steel, 316 Stainless Steel | ASTM A269 | Seamless, Welded | SAE J514 | 000000000 | 00000 |

- For Use With:
17-4 PH Stainless Steel: Air, Hydraulic Fluid, Water
316 Stainless Steel: Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water - Temperature Range:
17-4 PH Stainless Steel: -420° to 1200° F
316 Stainless Steel: -75° to 750° F - Tubing:
17-4 PH Stainless Steel: Use with welded or seamless 304 or 316 stainless steel that meets ASTM A269
316 Stainless Steel: Use with seamless 304 or 316/316L/316Ti stainless steel that meets DIN EN 10216-5 or DIN EN 10305-1 - Specifications Met:
17-4 PH Stainless Steel: SAE J514
316 Stainless Steel: ISO 8434-1, DIN 2353
For Tube | |||||
---|---|---|---|---|---|
OD | Wall Thick. | Sleeve Material | Max. Pressure | Each | |
1/8" | 0.028" | 17-4 PH Stainless Steel | 4,300 psi @ 72° F | 000000000 | 00000 |
1/4" | 0.035" | 17-4 PH Stainless Steel | 4,000 psi @ 72° F | 000000000 | 0000 |
3/8" | 0.035" | 17-4 PH Stainless Steel | 2,600 psi @ 72° F | 000000000 | 0000 |
1/2" | 0.049" | 17-4 PH Stainless Steel | 1,900 psi @ 72° F | 000000000 | 0000 |
5/8" | 0.058" | 17-4 PH Stainless Steel | 2,300 psi @ 72° F | 000000000 | 0000 |
3/4" | 0.065" | 17-4 PH Stainless Steel | 1,900 psi @ 72° F | 000000000 | 00000 |
1" | 0.065" | 17-4 PH Stainless Steel | 1,900 psi @ 72° F | 000000000 | 00000 |
Precision Compression Fittings for Stainless Steel Tubing

- For Use With: Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water
- Temperature Range: -420° to 1200° F
- Tubing: Use with welded or seamless 304 or 316 stainless steel that meets ASTM A213, ASTM A249, or ASTM A269
- Compatible With: Parker CPI
Made to tighter tolerances than other compression fittings, these are designed for high-precision applications. Also known as instrumentation fittings and flareless fittings. They come with a nut and a single sleeve (ferrule). The sleeve bites into tubing as you tighten the nut to create a strong seal. Fittings are 316 stainless steel for excellent corrosion resistance. A molybdenum disulfide coating on the nut acts as a lubricant for easy installation.


Caps for tubing have a nut and a sleeve so you can close off the end of your tubing in place of a fitting. Caps for fittings replace the nut and sleeve of an existing fitting.
For Tube | For Tubing | For Fitting | |||||
---|---|---|---|---|---|---|---|
OD | Wall Thick. | Material | Max. Pressure | Each | Each | ||
1/16" | 0.02" | 316 Stainless Steel | 7,500 psi @ 72° F | 00000000 | 000000 | 00000000 | 000000 |
1/8" | 0.035" | 316 Stainless Steel | 5,500 psi @ 72° F | 00000000 | 00000 | 00000000 | 00000 |
3/16" | 0.035" | 316 Stainless Steel | 5,500 psi @ 72° F | 00000000 | 00000 | 00000000 | 00000 |
1/4" | 0.035" | 316 Stainless Steel | 4,000 psi @ 72° F | 00000000 | 00000 | 00000000 | 0000 |
5/16" | 0.035" | 316 Stainless Steel | 3,200 psi @ 72° F | 00000000 | 00000 | 00000000 | 00000 |
3/8" | 0.035" | 316 Stainless Steel | 2,600 psi @ 72° F | 00000000 | 00000 | 00000000 | 00000 |
1/2" | 0.035" | 316 Stainless Steel | 2,100 psi @ 72° F | 00000000 | 00000 | 00000000 | 00000 |
5/8" | 0.049" | 316 Stainless Steel | 2,100 psi @ 72° F | 00000000 | 00000 | 00000000 | 00000 |
3/4" | 0.049" | 316 Stainless Steel | 2,100 psi @ 72° F | 00000000 | 00000 | 00000000 | 00000 |

For Tube | ||||
---|---|---|---|---|
OD | Wall Thick. | Nut Material | Max. Pressure | |
1/16" | 0.02" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 7,500 psi @ 72° F | 00000000 |
3/16" | 0.035" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 5,500 psi @ 72° F | 00000000 |
1/4" | 0.035" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 4,000 psi @ 72° F | 00000000 |
5/16" | 0.035" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 3,200 psi @ 72° F | 00000000 |
3/8" | 0.035" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 2,600 psi @ 72° F | 00000000 |
1/2" | 0.035" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 2,100 psi @ 72° F | 00000000 |
5/8" | 0.049" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 2,100 psi @ 72° F | 00000000 |
3/4" | 0.049" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 2,100 psi @ 72° F | 00000000 |

For Tube | ||||
---|---|---|---|---|
OD | Wall Thick. | Sleeve Material | Max. Pressure | |
1/16" | 0.02" | 316 Stainless Steel | 7,500 psi @ 72° F | 00000000 |
1/8" | 0.035" | 316 Stainless Steel | 5,500 psi @ 72° F | 00000000 |
3/16" | 0.035" | 316 Stainless Steel | 5,500 psi @ 72° F | 00000000 |
1/4" | 0.035" | 316 Stainless Steel | 4,000 psi @ 72° F | 00000000 |
5/16" | 0.035" | 316 Stainless Steel | 3,200 psi @ 72° F | 00000000 |
3/8" | 0.035" | 316 Stainless Steel | 2,600 psi @ 72° F | 00000000 |
1/2" | 0.035" | 316 Stainless Steel | 2,100 psi @ 72° F | 00000000 |
5/8" | 0.049" | 316 Stainless Steel | 2,100 psi @ 72° F | 00000000 |
3/4" | 0.049" | 316 Stainless Steel | 2,100 psi @ 72° F | 00000000 |