Bend this wire and it will stay put. It’s frequently used as tying wire and locking wire.

This material has tighter tolerances than standard 304 stainless steel.

When compared to standard 304 stainless steel, this material can be machined faster with less wear on cutting tools. It's also called Prodec and Project 70+.

When bent, this wire will stay in place. It's widely used as tying and locking wire.

Bend this wire and it will stay in place. It's widely used as tying and locking wire.

This material is precision ground to offer tighter tolerances than standard 316 stainless steel.

The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.

Bend this wire and it will stay in place. It's commonly used as tying and locking wire.

Precision ground to a tight diameter tolerance, these rods are all set for turning applications in a lathe.

Ready for turning in your lathe, these rods are precision ground to a tight tolerance.

With a higher chromium content than 15-5 PH stainless steel, this high-strength 17-4 PH offers better corrosion resistance. It is also known as 630 stainless steel.

Hardened for improved strength and wear resistance, these rods are precision ground to a strict diameter tolerance. Use them for turning applications in your lathe.

This wire rope provides a good balance of abrasion resistance and flexibility.

Often used as bracing and guy wires, individual strands are thick solid wire for a stiff construction.

This stainless steel wire rope withstands outdoor and washdown applications. The construction of this wire rope provides a good balance of abrasion resistance and flexibility.

This stainless steel wire rope withstands outdoor and washdown applications. The construction of this wire rope provides a good balance of abrasion resistance and flexibility.

This wire rope provides a good balance of abrasion resistance and flexibility.

This stainless steel wire rope withstands outdoor and washdown applications. The construction of this wire rope provides a good balance of abrasion resistance and flexibility.

This braided wire has a stiff construction for use as bracing and guy wires.

This wire rope provides a good balance of abrasion resistance and flexibility.

This wire rope provides a good balance of abrasion resistance and flexibility.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

More wires per strand than other wire rope gives this wire rope the flexibility required for repeat bending over drums and pulleys.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

These clamps have a forged fabrication and are reliable in critical applications. They are not for making slings. These must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end. They’re also known as wire rope clips.

Use in noncritical applications, such as fencing, where the strength of a forged clamp is not required. Install clamps so the saddle is on the long (live) end and the U-bolt is on the short (dead) end. They’re also known as wire rope clips.

Also known as standard-pattern thimbles, these provide better protection against fraying than light duty thimbles.

These thimbles are also known as thin pattern thimbles.

Install these stud-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Install these clevis-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Also known as socket-end swage fittings, install these stud-end fittings with a roller swage press for a strong, permanent hold.

Also known as socket-end swage fittings, install these clevis-end fittings with a roller swage press for a strong, permanent hold.

Add an eye-end to wire rope without having to fray the rope or use a compression tool.

Add a clevis end to wire rope without having to fray the rope or use a compression tool.

Compress the thin shank wall with a hand tool to attach these light duty eye-end fittings. They are also known as hand swage fittings.

A thimble on the inside of the loop protects the wire rope from fraying.

Made to meet stringent military standards, the fittings on these lanyards meet MS 20668 and MS 21259.

Secure a ball with shank to a flat surface.

Made to meet stringent military standards, the fittings on these lanyards meet MS 20664 and MS 20668.

For use in washdown environments, this wire rope has better corrosion resistance than the galvanized steel wire rope.

Acid flux has strong cleaning action, but leaves corrosive residue that washes away with water.

Rosin flux is quick acting with strong cleaning action, but leaves residue that requires flux remover.

Acid flux has strong cleaning action, but leaves corrosive residue that washes away with water.

The high melting point prevents remelting when soldering successive joints with another solder.

Made of indium, this solder is soft and malleable—even as temperatures approach absolute zero—to form an airtight seal between metal and certain non-metal materials.

For use on large, flat areas, this indium ribbon solder is soft and malleable—even as temperatures approach absolute zero—to form an airtight seal between metal.

Use this solder for general purpose applications.

Composed of pure tin, this solder is safe for use with food service equipment.

Rosin flux is quick acting with strong cleaning action, but leaves residue that requires flux remover.

The flux leaves minimal residue so there's no cleanup.

The flux leaves minimal residue so there's no cleanup.

The flux residue easily washes away with water.

This bismuth-tin solder has similar performance properties to lead solder, but is also safe for use in food-processing equipment and copper water pipes.

No need to add flux—these alloys have it built in.

Use these alloys with most metals in general purpose applications.

No need to add flux—these alloys have it built in.

When melted, these alloys form a thin liquid that easily flows into smaller gaps than standard gap-filling brazing alloys.

Attach conduit to a knockout in an outlet box or enclosure.

Made of stainless steel, these grips have excellent corrosion resistance.