Make marks on surfaces with a Rockwell hardness up to C30, including leather, wood, and most metals. Stamps are steel.

The thick shank provides more control for more consistent marks than our standard metal stamps. Make marks on surfaces with a Rockwell hardness up to C30, including leather, wood, and most metals. Stamps are steel.

These stamps have a solid face.

Make marks on surfaces with a Rockwell hardness up to C30, including leather, wood, and most metals.

Create raised lettering similar to a license plate with these reverse-face stamps. Impressions are made on the backside of metals for an embossed character on the front.

These steel stamps are strong enough to make marks on surfaces with a Rockwell hardness up to C50, including stainless steel and heat-treated steel.

Made from 440C stainless steel, these stamps won't rust and flake with exposure to moisture and chemicals. They're strong enough to make marks on surfaces with a Rockwell hardness up to C50, including other stainless steels and heat-treated steel.

Make marks on surfaces with a Rockwell hardness up to C50, including stainless steel and heat-treated steel.

Create raised lettering similar to a license plate with these reverse-face stamps. Impressions are made on the backside of metals for an embossed character on the front.

Choose only the characters you need to make your message from 0-9, A-Z, period, forward slash (/), dash, and blank spaces.

Everything you need to make your own messages in one convenient case, including letters, numbers, punctuation, and a holder.

Specify the message or logo you need.

These stamps provide an entire number set in the convenience of one handheld stamp. Rotate the wheel to change the character.

Send in your logo or design to have it turned into a stamp.

Specify the message you need.

Press individual characters into one of seven holders to create your message.

Rotate the individual bands to select the characters you need.

These stamps automatically advance to the next number or you can set them to move ahead after the 2nd, 3rd, 4th, 6th, or 12th impression.

Specify the number or message you need.

Use this ink on boxes, fabric, and paper as well as metal and plastic surfaces.

Make marks on metal even when the surface is oily or wet.

Mix the included catalyst into this ink to add resistance to solvents and abrasion. Use on nonporous surfaces such as plastic, glass, and metal.

Strengthened edges cut holes up to 4" dia. in fabric, leather, rubber, and soft metal. Also known as arch punches.

Make oblong holes in fabric, leather, and rubber. Also known as arch punches.

For accurate punching of inner and outer holes, these sets come with pilots that attach to the outer hole punch.

Sets include common ID and OD sizes to create gaskets and washers in two strikes.

Screw one of the interchangeable heads into the included handle to create holes up to 3/16" dia. in tight spaces.

The driver supplies eight tons of force to the hole punches in this set to make straight punches.

Create larger holes and make repeated punches with these drivers that supply 11 tons of force to the included hole punches.

Punch conduit up to size 1 1/4.

Create holes for installing heavy duty industrial connectors. When the die and punch are pressed together, four centering mandrels in the die mark where to drill holes for the connector's assembly.

These punches are half the size of standard portable lever-operated punches. They come with punches and dies in varying sizes.

Deliver nearly three times the punching force of a standard portable lever-operated punch by holding one handle and turning the other 360°.

Roller bearings in the lever provide low-effort punching.

Use twice the punching force of standard extended-reach punches to make holes in structural steel channels and angle iron.

Includes all six sizes of our individually sold hand-driven hole punches plus a tool to remove punched out material.

The body is cast steel.

Squeeze the spring-return handle to punch round holes of a single size.

Attach these saws to your portable drill to cut a range of large diameter hole sizes in sheet metal.

These high-speed steel saws cuts through aluminum, brass, bronze, and steel.

Make clean, fast cuts in thin metal and plastic when you use one of these saws with an impact driver. The body widens at the top to prevent the saw from pushing through your workpiece.

An extra-thick steel body with carbide teeth can cut through stainless steel structural framing and electrical enclosures.

Quickly connect these saws to your drill or drill press with the built-in arbor.

The carbide teeth on these saws last up to twice as long as high-speed steel teeth.

The diamond-grit edge on these hole saws cuts more accurately, leaves a smoother finish, and lasts up to twice as long as carbide-grit-coated teeth.

The saws in these kits have carbide-tipped teeth, so they last up to twice as long as saws with high-speed steel teeth.

The saws in these kits have carbide-grit-coated teeth that cut ceramic tile, fiberglass, masonry, plastic, and composites.

Fit these through existing holes and mark the center of the hole in a second workpiece.

Also known as blind-hole spotters, these punches fit into closed-end holes and mark the center of a complementary hole.

Insert these punches into an existing hole and twist the handle to open the end of the punch. The point automatically centers once the punch has fit the hole size.

Push down on the spring-loaded cone to center the punch in a variety of round and square hole sizes.

The punches in these sets have a uniform shoulder height so you can quickly transfer multiple hole locations at once. Also known as transfer screws.

Also known as transfer screws, the punches in these sets can be used in any threaded hole to transfer the hole location. Use the handle to screw a punch into a hole.

With an internal spring mechanism, these punches offer one-hand operation when marking hole centers.

Punch has two viewing lenses. One has a circle and dot and one has a crosshair to enable you to pinpoint the location where you need to punch. Replace the lens with one of the two included punches and strike it with a hammer to mark the hole center.

Strike these Starrett punches with a hammer to mark hole centers in metal and other materials. Also known as center punches.

Also known as center punches, strike these with a hammer to mark hole centers in metal and other materials.

Punch soft materials and scribe lines in metal and wood.

These time cards work with all standard side-load time clocks.

Record attendance by punching in and out on time cards.

Record the time and date on invoices, freight bills, legal papers, and other time-sensitive documents.