91 Products

The top compartment has a window that shields the monitor while providing a clear view of the screen. Louvered cutouts allow ventilation to keep equipment cool, and all compartments have a keyed lock for added security.

Style A have cutouts for routing cords. A rear door provides access for performing maintenance.

Style B protect a computer from dirt and dust with gasketed construction. A fan/filter assembly keeps air inside clean and circulating, and a rear door provides access for performing maintenance.

Style C are made of stainless steel to withstand corrosive environments. They have cutouts in the back for routing cords.

With thicker steel and a thicker window than other stand-up-height computer workstations, these workstations protect a computer from tough plant environments. They have a surge suppressor outlet strip and a fan/filter assembly that keeps air inside clean and circulating. The top compartment has a latch that can only be opened when the bottom compartment is unlocked. Secure the bottom compartment and keyboard tray with padlocks.

Mobile workstations have a floor lock to keep them in place.

Adjust the shelves to accommodate a computer and other electronic equipment.

Style B have cutouts for routing cords.

Style C come with a CPU holder that adjusts from 8"-10" wide for a secure hold.

Style D have a mouse tray that can rotate 360°.

Style E have leveling feet to compensate for uneven floors.

Change any desk or table into a stand-up-height work surface. Raise and lower these workstations with a lever—you don't need to clear the surface to adjust the height. The air cylinder makes adjustments smooth and even. To keep wrists comfortable while working and typing, these workstations have chamfered edges.

For a comfortable computer setup, use workstations with a keyboard tray. The tray has space for a keyboard and mouse, and the monitor platform is wide enough for two standard monitors. Organize your cords using cutouts at the back of the keyboard tray.

Adjust both the slope and height of the top to a comfortable position for drawing, drafting, and writing. Turn the knob on each leg to adjust not only the height, but also the slope of the top from 0° to 50°. These workstations have a modesty panel to provide privacy and leveling feet to compensate for uneven floors.

Create a customized work area by adding accessories. These workstations are often used for small-parts assembly.

Static-dissipative tops, shelves, and bin-box rails have a surface that dissipates static to protect sensitive electronic equipment from damage.

Monitor holders rotate 360° on a swing arm.

Keyboard holders attach to the bottom of the monitor holder.

CPU holders suspend your CPU on a platform below the workstation to free up space. They slide out for access to the CPU.

Outlet strips have six outlets, a power switch, and a circuit breaker.

Drawers mount under the work surface and have a keyed lock.

Light fixtures adjust in any direction. They use two tubular T8 fluorescent bulbs (not included).

Shelves tilt forward and backward 45°.

Bin box racks contain four 13-in. rails, and can hold up to 12 four-in.-wide × three-in.-tall bin boxes.

Bin-box rails accept hanging bin boxes.

Move tools along the length of workstations with tool trolleys. Trolleys come with one hanger; additional hangers sold separately.

Footrest tubes span the length of workstations for foot support. Use footrest platforms along with footrest tubes for additional support.

Stainless steel workstations are often used in corrosive environments.

Style A can be folded up. They have a spring clip for holding papers and built-in pockets for storing forms, cards, and pencils.

Style B have a locking drawer for storage.

Style C have a locking top that lifts for access to a storage compartment.

Mount these workstations on a flat vertical surface to create a steady horizontal surface for writing, typing, or tinkering. They work as a case when closed, with a 2 3/4"-deep interior for carrying a laptop, small tools, and other supplies. When you need a workstation, mount them to a metal surface such as an electrical cabinet with the included magnets, or a nonmetal surface such as a wall with the included suction cups. The magnets and suction cups screw into either exterior side of workstations; leave magnets on one side and suction cups on the other to be ready for quick use. On the interior, workstations have a movable rubber work surface, magnetic strips across the top for holding tools, and wire rope cables to keep workstations open at a 90° angle.

Wheel your tablet with you around your facility while keeping it at a comfortable standing height. With a steel frame, these workstations hold up to bangs and scrapes for long-term use. All require a tablet holder (sold separately) to mount your tablet.

Choose Style A workstations to change the height of your mounted tablet for a custom working position. They have a plastic laminate work surface for taking notes and other tasks that’s easy to wipe clean. They also come with a cable holder and routing hole to organize and direct cables away from your tablet and work surface.

For Style B workstations, add an optional cable holder to organize and route cables away from your tablet. Attach it to the pole of your workstation with the included mount.

Tablet holders secure your tablet to the workstation while allowing access to the tablet’s outlets, camera lenses, and port holes. They include an adjustable mounting bracket, so you can tilt and rotate these holders for the best viewing angle. All are made of steel for durability. Tablet holders that are compatible with VESA (Video Electronics Standards Association) connect to devices with standard VESA mounting hole patterns.

All optional accessories come with a mount to attach them to the pole of your workstation. Power cord reels include a power cord and four outlets to charge devices on and near your workstation. The cord automatically retracts back into the reel when not in use. Baskets store items such as tools and equipment for easy access on the go. Sanitizer wipe holders and glove dispensers let you keep wipes and gloves close at hand.

For technical drawings and 3-D models, click on a part number.

Switch between sitting and standing while working. Press a button on the height adjustment switch, and the electric motor raises or lowers these workstations to your desired height. Assign up to three different heights to the three program buttons—press a button to automatically adjust the desk to the programmed height. These workstations also have programmable upper and lower height limits, and a lock function to prevent accidental height changes.

For technical drawings and 3-D models, click on a part number.

Shipped unassembled. These podiums cannot be sold to Canada due to import regulations.