Slide tubing into these fittings and secure with a clamp. Use at low pressures up to 80 psi.

Multiple colors allow you to color-code your line for easy identification.

This multiple-line tubing holds together on its own, so there's no need for cable ties or tape.

Static electricity will not build up in this tubing, so you can use it near sensitive equipment.

This tubing won’t degrade when exposed to the damaging effects of UV light.

This general purpose tubing is the industry standard for air and water applications.

Lightweight, spongy walls provide thermal insulation, so this tubing won’t produce condensation when cold air or fluid runs through it.

Stretch it, bend it, compress it – this tubing will spring back to its original shape.

Use this resilient tubing in high-temperature chemical applications up to 400° F.

Commonly used in applications requiring movement, such as metering (peristaltic) pumps and robotics, this tubing can handle continuous bending and flexing.

With a diameter of 2" or larger, this tubing has the girth to handle high volumes of acids and other harsh substances.

This tubing can withstand high-temperature chemical applications up to 400° F.

The industry standard for general purpose food, beverage, and dairy applications, this tubing meets NSF/ANSI Standard 51 for food contact.

Silicone with a metal additive, this tubing routes liquids and ingredients as hot as 390° F through your food plant and is caught by metal detectors if a piece falls into your line.

Silver ions are blended into the walls of this tubing to inhibit the growth of odor-causing microbes.

Hot food and beverage applications won’t harm this tubing—it can handle temperatures up to 390° F.

Typically used in applications requiring movement, such as metering (peristaltic) pumps and robotics, this tubing can handle repeated bending and flexing.

Lighter than other plastic and rubber tubing, but extremely tough, this tubing stands up to the wear and tear of daily use.

Tough and durable, this tubing resists abrasion and tearing.

This tubing can handle the highest temperatures of all of our fuel and lubricant tubing. Use it in applications up to 450° F.

This tubing is soft enough to handle continuous bending and flexing, yet tough enough to resist tearing and abrasion.

Designed for high-purity processes, this tubing is made without plasticizers like DEHP that can contaminate the fluid passing through it.

Keep this banding on hand for both permanent connections and emergency repairs. You'll need an installation tool and a buckle (both sold separately) to create a band clamp.

These clamps are easier to install than our Extra-Strength Low-Profile Band Clamps. Also known as center-punch clamps, they seal with a quick hammer blow to the buckle.

Easy to use, strong, and versatile, these hose clamps are the most common. Tighten their slotted screw with a screwdriver, hex nut driver, or wrench.

A raised safety collar around the head of the screw prevents your screwdriver from slipping and damaging the hose or tube.

One clamp fits a wide range of diameters, so you can always have the right size on hand.

Made of our most corrosion resistant stainless steel, these worm-drive clamps stand up to harsh acids and chemicals. Their band is smooth and has rolled edges, so they won’t cut into your hose or tube.

Unlike vibration-resistant pinch clamps, these have a torque rating for extra holding power in high-vibration applications. They are also known as high-torque clamps.

Made of nylon, these clamps have excellent corrosion and chemical resistance, don’t conduct electricity, and weigh less than metal clamps.

A double ring of thick wire provides a complete seal around large-diameter hose.

The T-bolt design provides excellent strength and creates a 360° seal. Clamps have a spring that automatically adjusts the clamp diameter when temperatures fluctuate.

The hose clamps in these assortments have a bolt closure that creates a 360° leak-preventing seal. The clamps have rolled edges, so they won’t cut into hose and tube.

Remove the bolt and flip open the hinged bridge to install.

Clamps have a smooth band with rolled edges to prevent them from cutting into your hose or tube.

Create 4" diameter and larger worm-drive clamps that withstand high-temperature applications.

Unlike other duct hose clamps, these are rated for a maximum work load. Clamps have a quick-release latch that lets you access your line frequently while maintaining your original clamp size.

Offering excellent UV and ozone resistance, this rubber hose is a good fit for outdoor applications.

Maintain a supply of tubing in a variety of sizes that withstand abrasion, moisture, and chemicals.