Material Material |
---|
|
Threading Threading |
---|
![]() | Fully Threaded |
![]() | Partially Threaded |
Washer Material Washer Material |
---|
|
More
These steel screws are zinc plated to resist corrosion in wet environments. A rubber washer cushions the screw to resist loosening from vibration. They have a hex head for a secure grip with a wrench and a flange to reduce the risk of crushing thin metal. Screws penetrate 0.025" and thinner sheet metal. Length is measured from under the washer.
For technical drawings and 3-D models, click on a part number.
Head | Washer | ||||||||
---|---|---|---|---|---|---|---|---|---|
Lg. | Wd. | Ht. | OD | Thick. | Drill Bit Size | Approximate Threads per Inch | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||
No. 14 | |||||||||
5/8" | 0.375" | 0.181" | 5/8" | 0.101" | 5.5 mm | 10 | 25 | 000000000 | 00000 |
3/4" | 0.375" | 0.181" | 5/8" | 0.101" | 5.5 mm | 10 | 50 | 000000000 | 00000 |
1" | 0.375" | 0.181" | 5/8" | 0.101" | 5.5 mm | 10 | 50 | 000000000 | 00000 |
1 1/4" | 0.375" | 0.181" | 5/8" | 0.101" | 5.5 mm | 10 | 50 | 000000000 | 00000 |
1 1/2" | 0.375" | 0.181" | 5/8" | 0.101" | 5.5 mm | 10 | 50 | 000000000 | 00000 |
2" | 0.375" | 0.181" | 5/8" | 0.101" | 5.5 mm | 10 | 25 | 000000000 | 00000 |
2 1/2" | 0.375" | 0.181" | 5/8" | 0.101" | 5.5 mm | 10 | 25 | 000000000 | 00000 |
3" | 0.375" | 0.181" | 5/8" | 0.101" | 5.5 mm | 10 | 25 | 000000000 | 00000 |
4" | 0.375" | 0.181" | 5/8" | 0.101" | 5.5 mm | 10 | 10 | 000000000 | 00000 |
5" | 0.375" | 0.181" | 5/8" | 0.101" | 5.5 mm | 10 | 5 | 000000000 | 00000 |
No. 17 | |||||||||
3/4" | 0.375" | 0.181" | 5/8" | 0.101" | 1/4" | 10 | 25 | 000000000 | 00000 |
1" | 0.375" | 0.181" | 5/8" | 0.101" | 1/4" | 10 | 25 | 000000000 | 00000 |
Made from 18-8 stainless steel, these screws are chemical resistant and may be mildly magnetic. A rubber washer cushions the screw to resist loosening from vibration. They have a hex head for a secure grip with a wrench and a flange to reduce the risk of crushing thin metal. Screws penetrate 0.025" and thinner sheet metal. Length is measured from under the washer.
For technical drawings and 3-D models, click on a part number.
Head | Washer | ||||||||
---|---|---|---|---|---|---|---|---|---|
Lg. | Wd. | Ht. | OD | Thick. | Drill Bit Size | Approximate Threads per Inch | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||||||||
No. 14 | |||||||||
3/4" | 0.375" | 0.181" | 0.625" | 0.101" | 5.5 mm | 10 | 10 | 000000000 | 00000 |
1" | 0.375" | 0.181" | 0.625" | 0.101" | 5.5 mm | 10 | 10 | 000000000 | 0000 |
1 1/2" | 0.375" | 0.181" | 0.625" | 0.101" | 5.5 mm | 10 | 10 | 000000000 | 0000 |
2" | 0.375" | 0.181" | 0.625" | 0.101" | 5.5 mm | 10 | 10 | 000000000 | 00000 |
2 1/2" | 0.375" | 0.181" | 0.625" | 0.101" | 5.5 mm | 10 | 5 | 000000000 | 00000 |
3" | 0.375" | 0.181" | 0.625" | 0.101" | 5.5 mm | 10 | 5 | 000000000 | 00000 |
4" | 0.375" | 0.181" | 0.625" | 0.101" | 5.5 mm | 10 | 1 | 000000000 | 0000 |
5" | 0.375" | 0.181" | 0.625" | 0.101" | 5.5 mm | 10 | 1 | 000000000 | 0000 |
6" | 0.375" | 0.181" | 0.625" | 0.101" | 5.5 mm | 10 | 1 | 000000000 | 0000 |
No. 17 | |||||||||
3/4" | 0.375" | 0.181" | 0.625" | 0.101" | 1/4" | 10 | 10 | 000000000 | 00000 |
1" | 0.375" | 0.181" | 0.625" | 0.101" | 1/4" | 10 | 10 | 000000000 | 00000 |