McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    78 Products

    Glove Boxes

    Safely handle hazardous and sensitive material in an enclosed space that keeps out air and moisture. These boxes have built-in gloves for protecting your hands and a viewing window for seeing your work. Position them on any flat work surface.
    Painted Steel Boxes with Latex Gloves
    Image of Product. Front orientation. Glove Boxes and Bags. Glove Boxes, Painted Steel.
    Image of Product. Shown with Painted Steel Box with Latex Gloves. Front orientation. Glove Boxes and Bags. Glove Boxes.

    Shown with Painted Steel Box with

    Latex Gloves

    Steel boxes are durable and stand up to frequent use. To deposit material and equipment without letting in air and moisture, they have a side chamber with one interior and one exterior door. There’s also a front door in case you need a bigger opening. Use the included humidity meter to make sure that sensitive material isn’t exposed to too much moisture.
    Two 1/4" ID Push-to-Connect Gas Port Fittings—Use boxes with gas port fittings to exhaust the gas within and replace it with a different gas that works for your application.
    Inside
    Overall
    Front
    Door
    Side Door
    Glove
    Ht.
    Wd.
    Dp.
    Ht.
    Wd.
    Dp.
    Opening
    Ht.
    Opening
    Wd.
    Opening
    Ht.
    Opening
    Wd.
    Size
    Port
    Dia.
    Max. Temp.,
    ° F
    Includes
    Features
    Each
    19 7/8"31 7/8"23 7/8"24"32"25"20"32"8 1/4"8 3/8"106"150Humidity MeterTwo 1/4" ID Push-to-Connect Gas Port Fittings0000000000000000
    Accessories and Replacements for Glove Boxes and Bags

    Glove Box Clamps

    Image of Product. Front orientation. Glove Box Clamps.
    Use these clamps to secure gloves to a glove box. These worm drive clamps come with two adjustable clamps, one for each glove access hole. Fold the open end of your glove over a hole extension before securing it with one of these clamps.
    Clamp
    Type
    Clamp
    ID
    Material
    Pkg.
    Qty.
    Pkg.
    Worm Drive6"Steel20000000000000
    Worm Drive8"Steel2000000000000

    Disposable Glove Dispensers

    Image of ProductInUse. Front orientation. Glove Dispensers. Disposable Glove Dispensers, For 1 Box.
    Image of ProductInUse. Front orientation. Glove Dispensers. Disposable Glove Dispensers, For 2 Boxes.

    For 1 Box

    For 2 Boxes

    Image of ProductInUse. Front orientation. Glove Dispensers. Disposable Glove Dispensers, For 3 Boxes.
    Image of ProductInUse. Front orientation. Glove Dispensers. Disposable Glove Dispensers, For 4 Boxes.

    For 3 Boxes

    For 4 Boxes

    Keep gloves accessible and ready to use. Gloves are sold separately.
    Cabinet Mount—Cabinet-mount dispensers have front mounting holes for easy installation.
    Divider—Dispensers with a divider let you quickly replace empty glove boxes without accidental movement.
    Mounting
    Material
    Color
    Ht.
    Wd.
    Dp.
    Location
    Fasteners
    Included
    No. of
    Holes
    Hole
    Dia.
    Features
    Each
    For 1 Box
    Powder-Coated SteelWhite8 3/16"5 11/16"3 3/4"WallNo21/4"000000000000000
    Powder-Coated SteelWhite10"5 5/8"3 13/16"CabinetNo43/16"00000000000000
    Powder-Coated SteelWhite10"5 5/8"3 7/8"WallNo21/4"00000000000000
     
    For 2 Boxes
    Powder-Coated SteelWhite8 3/16"11"3 3/4"WallNo21/4"00000000000000
    Powder-Coated SteelWhite10"10 9/16"3 13/16"WallNo41/4"00000000000000
     
    For 3 Boxes
    Powder-Coated SteelWhite8 3/16"16 5/16"3 3/4"WallNo41/4"00000000000000
    Powder-Coated SteelWhite10"15 13/16"3 13/16"WallNo41/4"00000000000000
    Powder-Coated SteelWhite10"15 7/8"3 13/16"WallNo41/4"Divider00000000000000
     
    For 4 Boxes
    Powder-Coated SteelWhite8 3/16"21 11/16"3 3/4"WallNo61/4"00000000000000
    Powder-Coated SteelWhite10"21 3/16"3 13/16"WallNo41/4"Divider00000000000000
    Powder-Coated SteelWhite10"22 5/16"3 13/16"WallNo41/4"00000000000000
     

    Bench-Top Abrasive Blasting Cabinets

    Not for use with silica sand, steel shot, baking soda, and plastic grit.
    Cabinet with Dust Collector
    Image of Product. Front orientation. Abrasive Blasting Cabinets. Bench-Top Abrasive Blasting Cabinets, Cabinets, Dust Collector.
    Cabinet with a dust collector has a safety switch that shuts off airflow when the cabinet door is opened. The dust collector removes dust from the cabinet.
    Inside
    Overall
    Front
    Door
    Air
    Inlet
    Wd.
    Ht.
    Dp.
    Wd.
    Ht.
    Dp.
    Opening
    Wd.
    Opening
    Ht.
    Dust Collector
    Airflow, ft³/min
    Pipe
    Size
    Thread
    Type
    Req. Air Pressure,
    psi
    Air Consumption
    @ Pressure
    Voltage,
    V AC
    Includes
    Each
    Steel
    18"16"16"19"33"17"18"12"853/8
    NPT
    10 to 12512 ft³/min @ 80 psi120100-Mesh Glass Bead Blasting Media (10 lbs.)
    Air Hose
    Blast Hose
    Blasting Gun
    Foot Pedal
    Safety Gloves
    Steel Stand
    0000000000000000
     
    Replacements for Abrasive Blasting Cabinets
    Cabinet
    Image of Product. Front orientation. Abrasive Blasting Cabinets. Bench-Top Abrasive Blasting Cabinets, Cabinets.
    Cabinet without a dust collector can be hooked up to dust collector (sold separately) or a shop vacuum using the cabinet's 2 1/4" port.
    Inside
    Overall
    Front
    Door
    Air
    Inlet
    Wd.
    Ht.
    Dp.
    Wd.
    Ht.
    Dp.
    Opening
    Wd.
    Opening
    Ht.
    Pipe
    Size
    Thread
    Type
    Req. Air Pressure,
    psi
    Air Consumption
    @ Pressure
    Voltage,
    V AC
    Includes
    Each
    Steel
    23"20"19"24 1/2"40"20 1/2"24"13"3/8
    NPT
    10 to 12512 ft³/min @ 80 psi120100-Mesh Glass Bead Blasting Media (10 lbs.)
    Adjustable Steel Stand
    Air Hose
    Blast Hose
    Blasting Gun
    Safety Gloves
    0000000000000000
     
    Replacements for Abrasive Blasting Cabinets

    Abrasive Blasting Cabinets

    Image of Product. Front orientation. Abrasive Blasting Cabinets. Abrasive Blasting Cabinets.
    Lift the front door to load and remove parts. A dust collector removes dust from inside the cabinet. Not for use with silica sand, steel shot, baking soda, and plastic grit.
    Inside
    Overall
    Front
    Door
    Side Doors
    Air
    Inlet
    Wd.
    Ht.
    Dp.
    Wd.
    Ht.
    Dp.
    Opening
    Wd.
    Opening
    Ht.
    Location
    Opening
    Wd.
    Opening
    Ht.
    Pipe
    Size
    Thread
    Type
    Req. Air Pressure,
    psi
    Air Consumption
    @ Pressure
    Features
    Includes
    Each
    Steel
    30"23"24"32"63"25"30"13"3/8
    NPT
    10 to 12512 ft³/min @ 80 psiAir Regulator and Gauge
    Dust Collector
    Hopper Door
    LED Light
    Safety Switch
    Steel Mesh Work Table
    Window
    100-Mesh Glass Bead Blasting Media (10 lbs.)
    Air Hose
    Blast Hose
    Blasting Gun
    Foot Pedal
    Safety Gloves
    000000000000000
    36"23"24"39"63"25"36"13"Right Side17"11"3/8
    NPT
    10 to 12525 ft³/min @ 80 psiAir Regulator and Gauge
    Dust Collector
    Hopper Door
    LED Light
    Safety Switch
    Steel Mesh Work Table
    Window
    100-Mesh Glass Bead Blasting Media (10 lbs.)
    Air Hose
    Blast Hose
    Blasting Gun
    Foot Pedal
    Safety Gloves
    00000000000000
    48"23"24"51"63"25"48"13"Left Side, Right Side17"11"3/8
    NPT
    10 to 12525 ft³/min @ 80 psiAir Regulator and Gauge
    Dust Collector
    Hopper Door
    LED Light
    Safety Switch
    Steel Mesh Work Table
    Window
    100-Mesh Glass Bead Blasting Media (10 lbs.)
    Air Hose
    Blast Hose
    Blasting Gun
    Foot Pedal
    Safety Gloves
    00000000000000
     
    Replacements for Abrasive Blasting Cabinets

    Easy-Load Abrasive Blasting Cabinets

    Image of Product. Front orientation. Abrasive Blasting Cabinets. Easy-Load Abrasive Blasting Cabinets.
    The entire top opens to accommodate large parts. A dust collector removes dust from inside the cabinet. Not for use with silica sand, steel shot, baking soda, and plastic grit.
    Inside
    Overall
    Front
    Door
    Side Doors
    Air
    Inlet
    Wd.
    Ht.
    Dp.
    Wd.
    Ht.
    Dp.
    Opening
    Wd.
    Opening
    Ht.
    Location
    Opening
    Wd.
    Opening
    Ht.
    Pipe
    Size
    Thread
    Type
    Req. Air Pressure,
    psi
    Air Consumption
    @ Pressure
    Includes
    Each
    Steel
    40"30"40"43"82"72"40"40"Right Side30"20"3/8
    NPT
    10 to 12525 ft³/min @ 80 psi100-Mesh Glass Bead Blasting Media (10 lbs.)
    Air Hose
    Blast Hose
    Blasting Gun
    Foot Pedal
    Safety Gloves
    0000000000000000
    42"23"24"46"65"54"42"24"Right Side17"11"3/8
    NPT
    10 to 12525 ft³/min @ 80 psi100-Mesh Glass Bead Blasting Media (10 lbs.)
    Air Hose
    Blast Hose
    Blasting Gun
    Foot Pedal
    Safety Gloves
    000000000000000
    48"40"48"52"94"90"48"48"Right Side30"20"3/8
    NPT
    10 to 12525 ft³/min @ 80 psi100-Mesh Glass Bead Blasting Media (10 lbs.)
    Air Hose
    Blast Hose
    Blasting Gun
    Foot Pedal
    Safety Gloves
    000000000000000
    60"40"48"65"92"86"60"48"Right Side30"20"3/8
    NPT
    10 to 12525 ft³/min @ 80 psi100-Mesh Glass Bead Blasting Media (10 lbs.)
    Air Hose
    Blast Hose
    Blasting Gun
    Foot Pedal
    Safety Gloves
    000000000000000
     
    Replacements for Abrasive Blasting Cabinets

    Personal Protection Sanitizing Stations

    Promote safe social-health practices and prevent the spread of illness by making it easy to access tissues, hand sanitizer, and other sanitary items. These stations are used in public spaces such as waiting areas, offices, and lobbies. All have space to hold two boxes of tissues or disposable gloves. They have holes for mounting them to a wall permanently. To position them temporarily without mounting, they have a flat base for sitting on a counter or other flat surface. These stations do not come with any face masks, gloves, tissues, or sanitizers.
    Brown woodgrain and black stations look less clinical than beige stations, so they’re good for locations where aesthetics are important, such as lobbies and offices.
    Personal Protection Sanitizing Stations
    Image of ProductInUse. Front orientation. Personal Protection Sanitizing Stations. Personal Protection Sanitizing Stations.
    Image of Product. Front orientation. Floor Stands for Personal Protection Sanitizing Stations. Personal Protection Sanitizing Stations.

    Floor Stands for

    Personal Protection

    Sanitizing Stations

    Powder-Coated Steel—Steel stations last longer than plastic stations because they’re more durable and impact resistant. They’re also unaffected by extreme temperatures. All are power coated for corrosion resistance, meaning they won’t rust or deteriorate over time.
    1 Compartment—Stations with one face mask compartment hold two boxes of disposable face masks; they cannot dispense loose masks properly.
    Floor Stands for Personal Protection Sanitizing Stations—Add floor stands to position stations in the center of rooms, in entryways, and in other spots where mounting to a wall isn’t convenient. Floor stands come with mounting hardware.
    Personal Protection Sanitizing Stations
    Floor Stands for Personal
    Protection Sanitizing Stations
    Face Mask
    Compartment
    Hand Sanitizer
    Compartment
    Tissue/Glove
    Compartment
    Overall
    Mounting
    Hole
    Base
    No.
    of
    For No.
    of Boxes
    No.
    of
    For Mount
    Type
    No.
    of
    For No.
    of Boxes
    Ht.
    Wd.
    Dp.
    Color
    Mounting
    Location
    No.
    of
    Dia.
    Mounting Hardware
    Included
    Each
    Wd.
    Dp.
    Ht.
    Material
    Color
    Each
    Powder-Coated Steel
    121Freestanding1211 3/4"18"5"BeigeFloor Stand, Wall41/8", 1/4"No00000000000000017"17"36"Powder-Coated SteelBeige000000000000000
     
    Sign Holders
    Personal Protection Sanitizing Stations with Hinged Locking Lid
    Image of ProductInUse. 1 Face Mask Compartment. Front orientation. Personal Protection Sanitizing Stations. Personal Protection Sanitizing Stations, Personal Protection Sanitizing Stations with Hinged Locking Lid, 1 Compartment.
    Image of Product. Front orientation. Floor Stands for Personal Protection Sanitizing Stations. Personal Protection Sanitizing Stations.

    1 Face Mask Compartment

    Floor Stands for

    Personal Protection

    Sanitizing Stations

    Stations with a hinged locking lid keep supplies secure, but reloading them is still easy. They also have mounting holes for adding a wall-mountable hand sanitizer dispenser instead of a freestanding bottle. If the mounting holes on your dispenser don’t line up, use mounting tape to attach it. To prevent stray drips of hand sanitizer from falling on floors and counters, they have a drip tray.
    Powder-Coated Steel—Steel stations last longer than plastic stations because they’re more durable and impact resistant. They’re also unaffected by extreme temperatures. All are power coated for corrosion resistance, meaning they won’t rust or deteriorate over time.
    1 Compartment—Stations with one face mask compartment hold two boxes of disposable face masks; they cannot dispense loose masks properly.
    Floor Stands for Personal Protection Sanitizing Stations—Add floor stands to position stations in the center of rooms, in entryways, and in other spots where mounting to a wall isn’t convenient. Floor stands come with mounting hardware.
    Personal Protection Sanitizing Stations
    Floor Stands for Personal
    Protection Sanitizing Stations
    Face Mask
    Compartment
    Hand Sanitizer Compartment
    Tissue/Glove
    Compartment
    Overall
    Mounting
    Hole
    Base
    No.
    of
    For No.
    of Boxes
    No.
    of
    For Mount Type
    Mounting Hardware
    Included
    No.
    of
    For No.
    of Boxes
    Ht.
    Wd.
    Dp.
    Color
    Mounting
    Location
    No.
    of
    Dia.
    Mounting Hardware
    Included
    Each
    Wd.
    Dp.
    Ht.
    Material
    Color
    Each
    Powder-Coated Steel
    121Adhesive Back, ScrewNo1214 3/4"22 1/4"5 1/4"BeigeFloor Stand, Wall41/8", 1/4"No00000000000000017"17"36"Powder-Coated SteelBeige000000000000000
     
    Sign Holders
    back to top