With a thickness that's precision ground to a tight tolerance, these bars are sometimes called flat stock.

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

The galvannealed coating allows these steel sheets to be painted without prepping the surface. They're easier to weld and more scratch resistant than zinc-galvanized steel sheets. Use them for outdoor signs, cabinets, and doors.

A silver-filled resin coating on one side of these sheets protects from degradation caused by bacteria and fungi.

The nickel and molybdenum content gives AR400 carbon steel the ability to resist wear better than all other carbon steel. It's often used as wear strips, liners, and deflector plates.

A lead-free alternative to 12L14, 1215 carbon steel contains the same amount of sulfur and phosphorus for excellent machinability. It is often used for shaft couplings, studs, and pins.

This UHSS (ultra high-strength steel) allows you to fabricate high-strength parts using thinner material than you could with other types of steel. It is formable, weldable, and more economical than alloy steel.

Easy to forge, grind, and heat treat, these 1084 high-carbon steel bars offer high strength and resist wear and abrasion.

These sheets and bars are hardened for increased abrasion and impact resistance. Also known as chrome-moly steel, 4140 alloy steel resists fracturing from repeated stress.

The thickness is oversized for finishing to your exact requirements.

4130 alloy steel has a low carbon content for good weldability. It's often used for gears, fasteners, and structural applications.

Heat treated for enhanced hardness and strength, A514 alloy steel is suitable for structural applications and supporting heavy loads.

These sheets have a softened temper, which is also known as annealed, so they can be easily formed into shape and then heat treated for spring properties.

Also known as scaleless steel.

Containing more carbon than low-carbon steel—but less than 1095 spring steel—1050 spring steel is easily formed into parts such as washers, brackets, and springs before being hardened for use.

Easier to machine without cracking than other impact-resistant ductile cast iron bars, these cast iron bars contain a high amount of ferrite. Use them to make cylinder and die blocks, rotary tables, and rail spacers.

When compared to standard 304 stainless steel, this material can be machined faster with less wear on cutting tools. It's also called Prodec and Project 70+.

This material has tighter tolerances than standard 304 stainless steel.

Harder than our other 304 stainless steel, these thin sheets offer better wear resistance for use as a wrap, liner, or cover.

Bend this wire and it will stay put. It’s frequently used as tying wire and locking wire.

Widely used for fabricating fittings and fasteners, 303 stainless steel machines quickly without sticking to cutting tools.

Use 430 stainless steel in decorative and light structural applications, rather than outdoors or in extreme temperatures.

This material is precision ground to offer tighter tolerances than standard 316 stainless steel.

One side of these sheets is polished to either a brushed or mirror-like finish.

Because these thin sheets are harder than our other 316 stainless steel, they offer better wear resistance. Use them as a wrap, liner, or cover.

Often used for fasteners and valves, 410 stainless steel withstands wear caused by abrasion.

This material is hardened for increased wear resistance over standard 420 stainless steel.

The width and thickness are oversized for finishing to your exact requirements.

One of the most machinable types of stainless steel available, 416 contains sulfur for fast machining without clogging cutting tools. It's used for gears, screws, and shafts.

With excellent strength and wear resistance, S30V stainless steel is a preferred material for knives and cutlery.

Each piece is precision ground to offer tighter tolerances than standard 17-4 PH stainless steel.

As the most formable of all the PH-grade materials, 17-7 PH stainless steel is widely used in the aerospace industry for intricate parts. When hardened, this material strengthens to make it resist distortion.

The titanium content of 321 stainless steel preserves corrosion resistance around weld points.

The thickness, length, and width are oversized for finishing to your exact requirements.

With an oversized thickness, length, and width, these bars can be finished to your exact requirements.

Hardened for increased abrasion and impact resistance.

Made from powdered metal, M4 tool steel has a consistent microstructure that gives it outstanding resistance to wear and abrasion. It is comparable to CPM Rex M4.

The thickness, length, and width are oversized for finishing to your exact requirements.

Also known as flat stock, these bars have an oversized thickness, length, and width for finishing to your exact requirements.

Keep shim stock in a variety of thicknesses on hand with these sets. Cut into custom shapes to fit your application.

Send us a drawing, and we'll cut your custom shim.

Openings in the surface allow dust, dirt, and liquids to pass through.

Narrow openings give this grating a higher load bearing surface than our standard metal bar grating and reduce the chance of something falling through.

Choose these stair treads for greater durability than metal plank grating stair treads.

Use plank grating for platforms, stair treads, ramps, and decks.

An integral toeboard keeps tools and parts from falling off this plank grating and meets OSHA 29 CFR 1910.23 for elevated walkways.

Hexagonal holes provide a large open area for high-flow applications.

A rubber seal protects against moisture around the installation hole.

Lock these brackets together with a pin or a bolt. They are often used on marine docks.

Precision ground to the tightest parallel tolerance, these steel plates have threaded and unthreaded holes in a grid pattern to support precise positioning and repeatability when machining.

Use these plates to ensure accurate right angles and hold workpieces and fixtures perpendicular to a machine table.

Mount workpieces in precisely located holes for repeatable setups.

Build fixtures on multiple sides of these squares.

Also known as vacuum chucks, these plates secure thin and flexible parts that can’t be held with vises or clamps for milling, drilling, routing, and finishing operations. Connect the system to your shop’s compressed air supply and it's ready to use.

A mounting plate provides a more secure hold at the mounting surface.

Combine with a U-bolt or routing clamp to convey a variety of material, such as pipe, tubing, and cable raceway, at distance from floors, walls, and ceilings. The extra clearance allows access for maintenance and adding and removing lines.

Covers create a smooth surface so small and oddly shaped items won't get caught between ball transfers.

Also known as ball-bearing parallels, these plates have multidirectional balls that project from the top and bottom to position and move small, heavy items over short distances.

Add length to a ball transfer conveyor with these 6" long extensions or integrate them into a roller conveyor for multidirectional movement.

These rings mount flush and fold down when not in use to eliminate obstructions.

The heaviest dock plates we offer, these are built to endure high-traffic use. Forklift loops on the top flip up for easy maneuvering with a forklift.

Close off unused outlets.

Add depth to your outlet box.

Knockouts allow you to modify these boxes to fit your application.

Close off unused outlets.

Knockouts allow you to modify these boxes to fit your application.

Enclose and protect outlets in concrete and under carpeted or tile floors.

The sealed ball bearings will never need additional lubrication.

The sealed ball bearings will never need additional lubrication.

A stop prevents the turntable from rotating all the way around.

These plates are thin enough for embossing, which produces raised characters similar to a license plate. This is useful in washdown applications where engraved or stamped impressions may fill with water or wear away.

Designed to wrap around the sides of strut channel, these brackets provide a stronger hold than other strut channel brackets.

Support the corners of strut channel structures.

Provide smooth motion between two pieces of strut channel.