For Wire Rope Diameter For Wire Rope Diameter |
|---|
Fitting Type Fitting Type |
|---|
 |  |
| Rope Clamp | Thimble |
For Wire Rope Construction For Wire Rope Construction |
|---|
 | 6 × 19 IWRC |
 | 7 × 19 Strand Core |
 | 6 × 19 Fiber Core |
 | 6 × 37 IWRC |
 | 6 × 26 IWRC |
 | 7 × 19 IWRC |
 | 19 × 7 Strand Core |
 | 6 × 7 Fiber Core |
 | 1 × 19 Strand Core |
 | 7 × 7 Strand Core |
 | 1 × 7 Strand Core |
 | 3 × 7 Hollow Core |
 | 18 × 7 IWRC |
Finish Finish |
|---|
|
Rope Turnback Rope Turnback |
|---|
|
|
|
Clamp Width Clamp Width |
|---|
Clamp Thickness Clamp Thickness |
|---|
|
|
|
Capacity Capacity |
|---|
Required Torque Required Torque |
|---|
Required Installation Tool Required Installation Tool |
|---|
|
Specifications Met Specifications Met |
|---|
|
Crosby Forged Single-Saddle Wire
Rope Clamps—Not for Lifting
These must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end. Their forged fabrication makes these clamps more reliable in critical applications such as tie downs and support lines. They’re also known as wire rope clips. Clamps have a thick coating for corrosion resistance.
Warning: Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Clamp | Each | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Wire Rope Dia. | No. of Clamps Required | Rope Turnback | For Wire Rope Construction | Wd. | Ht. | Thick. | Color | Required Torque, ft.-lbs. | Capacity | Specifications Met | 1-9 | 10-Up | |
Galvanized Steel | |||||||||||||
| 1/8" | 2 | 3 1/4" | 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core | 1" | 15/16" | 13/16" | Red | 4.5 | 80% of the Rope's Capacity | ASME B30.26 | 0000000 | 00000 | 00000 |
| 3/16" | 2 | 3 3/4" | 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core | 1 3/16" | 1 1/4" | 1" | Red | 7.5 | 80% of the Rope's Capacity | ASME B30.26 | 0000000 | 0000 | 0000 |
| 1/4" | 2 | 4 3/4" | 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core | 1 7/16" | 1 3/8" | 1 1/4" | Red | 15 | 80% of the Rope's Capacity | ASME B30.26, Fed. Spec. FF-C-450 | 0000000 | 0000 | 0000 |
| 5/16" | 2 | 5 1/4" | 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core | 1 11/16" | 1 3/4" | 1 5/16" | Red | 30 | 80% of the Rope's Capacity | ASME B30.26, Fed. Spec. FF-C-450 | 0000000 | 0000 | 0000 |
| 3/8" | 2 | 6 1/2" | 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core | 2" | 1 15/16" | 1 11/16" | Red | 45 | 80% of the Rope's Capacity | ASME B30.26, Fed. Spec. FF-C-450 | 0000000 | 0000 | 0000 |
| 7/16" | 2 | 7" | 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core | 2 5/16" | 2 3/8" | 1 15/16" | Red | 65 | 80% of the Rope's Capacity | ASME B30.26, Fed. Spec. FF-C-450 | 0000000 | 0000 | 0000 |
| 7/16" 1/2" | 2 3 | 11 1/2" | 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core | 2 5/16" | 2 3/8" | 1 15/16" | Red | 65 | 80% of the Rope's Capacity | ASME B30.26, Fed. Spec. FF-C-450 | 0000000 | 0000 | 0000 |
| 9/16" | 3 | 12" | 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core | 2 1/2" | 2 13/16" | 2 1/16" | Red | 95 | 80% of the Rope's Capacity | ASME B30.26, Fed. Spec. FF-C-450 | 0000000 | 00000 | 00000 |
| 9/16" 5/8" | 3 | 12" | 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core | 2 1/2" | 2 13/16" | 2 1/16" | Red | 95 | 80% of the Rope's Capacity | ASME B30.26, Fed. Spec. FF-C-450 | 0000000 | 00000 | 00000 |
| 3/4" | 4 | 18" | 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core | 2 7/8" | 3 3/8" | 2 1/4" | Red | 130 | 80% of the Rope's Capacity | ASME B30.26, Fed. Spec. FF-C-450 | 0000000 | 00000 | 00000 |
| 7/8" | 4 | 19" | 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core | 3 3/16" | 3 7/8" | 2 1/2" | Red | 225 | 80% of the Rope's Capacity | ASME B30.26, Fed. Spec. FF-C-450 | 0000000 | 00000 | 00000 |
| 1" | 5 | 26" | 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core | 3 1/2" | 4 1/4" | 2 11/16" | Red | 225 | 90% of the Rope's Capacity | ASME B30.26, Fed. Spec. FF-C-450 | 0000000 | 00000 | 00000 |
| 1 1/8" | 6 | 34" | 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core | 3 5/8" | 4 5/8" | 2 13/16" | Red | 225 | 90% of the Rope's Capacity | ASME B30.26, Fed. Spec. FF-C-450 | 0000000 | 00000 | 00000 |
| 1 1/4" | 7 | 44" | 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core | 4 3/16" | 5 5/16" | 3 3/16" | Red | 360 | 90% of the Rope's Capacity | ASME B30.26, Fed. Spec. FF-C-450 | 0000000 | 00000 | 00000 |
| 1 3/8" | 7 | 44" | 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core | 4 1/4" | 5 5/16" | 3 3/16" | Red | 360 | 90% of the Rope's Capacity | ASME B30.26, Fed. Spec. FF-C-450 | 0000000 | 00000 | 00000 |
| 1 1/2" | 8 | 54" | 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core | 4 1/2" | 5 13/16" | 3 7/16" | Red | 360 | 90% of the Rope's Capacity | ASME B30.26, Fed. Spec. FF-C-450 | 0000000 | 00000 | 00000 |
Crosby Forged Double-Saddle
Wire Rope Clamps—Not for Lifting
These clamps apply equal pressure without crimping or crushing the wire rope, so orientation doesn't matter. They provide a saddle for both the long (live) and the short (dead) end of the wire rope. Their forged fabrication makes these clamps more reliable in critical applications such as tie downs and support lines. Also known as fist grip wire rope clips.
Warning: Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Clamp | Each | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Wire Rope Dia. | No. of Clamps Required | Rope Turnback | For Wire Rope Construction | Wd. | Ht. | Thick. | Required Torque, ft.-lbs. | Capacity | Specifications Met | 1-9 | 10-Up | |
Galvanized Steel | ||||||||||||
| 3/16" 1/4" | 2 2 | 4" 4" | 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core | 1 1/2" | 1 3/4" | 1" | 30 | 80% of the Rope's Capacity | ASME B30.26, Fed. Spec. FF-C-450 | 0000000 | 000000 | 000000 |
| 5/16" | 2 | 5" | 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core | 1 9/16" | 1 13/16" | 1 1/16" | 30 | 80% of the Rope's Capacity | ASME B30.26, Fed. Spec. FF-C-450 | 0000000 | 00000 | 00000 |
| 3/8" | 2 | 5 1/4" | 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core | 1 13/16" | 2 1/4" | 1 1/16" | 45 | 80% of the Rope's Capacity | ASME B30.26, Fed. Spec. FF-C-450 | 0000000 | 00000 | 00000 |
| 7/16" 1/2" | 2 3 | 6 1/2" 11" | 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core | 2 3/16" | 2 5/8" | 1 1/4" | 65 | 80% of the Rope's Capacity | ASME B30.26, Fed. Spec. FF-C-450 | 0000000 | 00000 | 00000 |
| 9/16" 5/8" | 3 3 | 12 3/4" 13 1/2" | 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core | 2 5/8" | 3 1/4" | 1 1/2" | 130 | 80% of the Rope's Capacity | ASME B30.26, Fed. Spec. FF-C-450 | 0000000 | 00000 | 00000 |
| 3/4" | 3 | 16" | 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core | 2 11/16" | 3 3/4" | 1 13/16" | 225 | 80% of the Rope's Capacity | ASME B30.26, Fed. Spec. FF-C-450 | 0000000 | 00000 | 00000 |
| 7/8" | 4 | 26" | 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core | 2 7/8" | 4 1/8" | 2 1/8" | 225 | 80% of the Rope's Capacity | ASME B30.26, Fed. Spec. FF-C-450 | 0000000 | 00000 | 00000 |
| 1" | 5 | 37" | 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core | 3 1/16" | 4 1/2" | 2 1/4" | 225 | 90% of the Rope's Capacity | ASME B30.26, Fed. Spec. FF-C-450 | 0000000 | 00000 | 00000 |
| 1 1/8" | 5 | 41" | 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core | 3 1/2" | 5 1/8" | 2 7/16" | 360 | 90% of the Rope's Capacity | ASME B30.26, Fed. Spec. FF-C-450 | 0000000 | 00000 | 00000 |
| 1 1/4" | 6 | 55" | 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core | 3 9/16" | 5 1/4" | 2 1/2" | 360 | 90% of the Rope's Capacity | ASME B30.26, Fed. Spec. FF-C-450 | 0000000 | 00000 | 00000 |
Forged One-Piece Wire Rope Clamps—Not for Lifting
Install these clamps without any specific orientation, slide the nut over the rope and tighten it onto the threaded halves. Their forged fabrication makes these clamps more reliable in critical applications such as tie downs and support lines.
Warning: Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For Wire Rope | Clamp | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Construction | Lg. | Wd. | Fabrication | Required Torque, ft.-lbs. | Capacity | Specifications Met | Each | |
Zinc-Plated Steel | |||||||||
| 1/8" | 6 × 19 IWRC 7 × 19 IWRC 7 × 19 Strand Core | 1 1/16" | 5/8" | Forged | 35 | 90% of the Rope's Capacity | Fed. Spec. FF-C-450, MS16843 | 0000000 | 000000 |
| 3/16" | 6 × 19 IWRC 7 × 19 IWRC 7 × 19 Strand Core | 1 5/16" | 13/16" | Forged | 80 | 90% of the Rope's Capacity | Fed. Spec. FF-C-450, MS16843 | 0000000 | 00000 |
| 1/4" | 6 × 19 IWRC 7 × 19 IWRC 7 × 19 Strand Core | 1 1/2" | 1" | Forged | 145 | 90% of the Rope's Capacity | Fed. Spec. FF-C-450, MS16843 | 0000000 | 00000 |
| 5/16" | 6 × 19 IWRC 7 × 19 IWRC 7 × 19 Strand Core | 1 15/16" | 1 1/4" | Forged | 225 | 90% of the Rope's Capacity | Fed. Spec. FF-C-450, MS16843 | 0000000 | 00000 |
| 3/8" | 6 × 19 IWRC 7 × 19 IWRC 7 × 19 Strand Core | 2 3/16" | 1 7/16" | Forged | 325 | 90% of the Rope's Capacity | Fed. Spec. FF-C-450, MS16843 | 0000000 | 00000 |
| 1/2" | 6 × 19 IWRC 7 × 19 IWRC 7 × 19 Strand Core | 2 7/8" | 1 15/16" | Forged | 575 | 90% of the Rope's Capacity | Fed. Spec. FF-C-450, MS16843 | 0000000 | 00000 |
Wire Rope Clamps with Thimbles—Not for Lifting
A clamp and thimble in one convenient fitting simplifies installation while providing support and fray protection to the wire rope loop. Use a torque wrench to tighten the clamp.
Warning: Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Loop | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Wire Rope Dia. | Rope Turnback | For Wire Rope Construction | Inside Lg. | Inside Wd. | Overall Lg. | Fabrication | Required Torque, ft.-lbs. | Capacity, lbs. | Each | |
Steel | ||||||||||
| 3/8" | 6 1/2" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC | 2 5/16" | 1 1/4" | 5 3/8" | Cast | 40 | 2,200 | 0000000 | 000000 |
| 7/16" | 7" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC | 2 7/8" | 1 7/16" | 6 1/2" | Cast | 80 | 3,000 | 0000000 | 00000 |
| 1/2" | 11 1/2" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC | 2 1/2" | 1 15/32" | 7 1/8" | Cast | 90 | 4,000 | 0000000 | 00000 |
| 9/16" | 12" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC | 3 1/2" | 1 7/8" | 8" | Cast | 90 | 4,000 | 00000000 | 000000 |
| 5/8" | 12" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC | 2 3/4" | 2" | 8 1/4" | Cast | 130 | 6,000 | 0000000 | 000000 |
| 3/4" | 18" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC | 4 3/4" | 2 1/2" | 11 5/8" | Cast | 135 | 8,800 | 0000000 | 000000 |
| 7/8" | 19" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC | 5 1/2" | 2 7/8" | 13 3/16" | Cast | 140 | 12,000 | 00000000 | 000000 |
| 1" | 26" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC | 6 1/2" | 3 1/4" | 14 1/4" | Cast | 145 | 15,500 | 00000000 | 000000 |
Easy-Install Wire Rope Clamps—Not for Lifting
Make a removable loop without specialty tools for use in noncritical applications, such as fencing. They're also known as tiller clamps.
Zinc-plated steel and iron clamps are mildly corrosion resistant.
Nickel-plated steel and iron are more corrosion resistant than zinc-plated clamps.
Warning: Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For Wire Rope | Clamp | ||||||
|---|---|---|---|---|---|---|---|
| Dia. | Construction | Lg. | Wd. | Thick. | Number of Screws | Each | |
Zinc-Plated Steel | |||||||
| 1/8" | 1 × 19 Strand Core 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 Strand Core | 1 9/16" | 3/4" | 3/8" | 2 | 0000000 | 00000 |
| 3/16" | 1 × 19 Strand Core 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 Strand Core 19 × 7 Strand Core | 1 5/8" | 7/8" | 3/8" | 2 | 0000000 | 0000 |
| 1/4" | 1 × 7 Strand Core 1 × 19 Strand Core 3 × 7 Hollow Core 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 Strand Core 19 × 7 Strand Core | 1 3/4" | 1" | 7/16" | 2 | 0000000 | 0000 |
| 5/16" | 1 × 7 Strand Core 1 × 19 Strand Core 3 × 7 Hollow Core 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core | 1 7/8" | 1" | 1/2" | 2 | 0000000 | 0000 |
Zinc-Plated Iron | |||||||
| 3/8" | 1 × 7 Strand Core 1 × 19 Strand Core 3 × 7 Hollow Core 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC 19 × 7 Strand Core | 2 5/16" | 1 3/16" | 5/8" | 3 | 0000000 | 00000 |
Nickel-Plated Steel | |||||||
| 1/8" | 1 × 19 Strand Core 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 Strand Core | 1 9/16" | 3/4" | 3/8" | 2 | 0000000 | 0000 |
| 3/16" | 1 × 19 Strand Core 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 Strand Core 19 × 7 Strand Core | 1 5/8" | 7/8" | 3/8" | 2 | 0000000 | 0000 |
| 1/4" | 1 × 7 Strand Core 1 × 19 Strand Core 3 × 7 Hollow Core 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 Strand Core 19 × 7 Strand Core | 1 3/4" | 1" | 7/16" | 2 | 0000000 | 0000 |
| 5/16" | 1 × 7 Strand Core 1 × 19 Strand Core 3 × 7 Hollow Core 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core | 1 7/8" | 1" | 1/2" | 2 | 0000000 | 0000 |
Nickel-Plated Iron | |||||||
| 3/8" | 1 × 7 Strand Core 1 × 19 Strand Core 3 × 7 Hollow Core 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC 19 × 7 Strand Core | 2 5/16" | 1 3/16" | 5/8" | 3 | 0000000 | 00000 |
Wire Rope Pulling Clamps
Attach these clamps by running a wire rope through the jaws to create an attachment point anywhere along the wire rope. The eye is often used with a ratchet puller.
For technical drawings and 3-D models, click on a part number.
Wire and Cable Pulling Clamps
Pull wire and cable while maintaining tension until the line can be permanently anchored. Use with stranded bare steel wire and cable in applications where marring can be tolerated.
Clamps with spring-loaded jaws grip the cable before tensioning to aid proper positioning.
The clamp with latch provides a more secure grip that prevents wire and cable from slipping out of the jaws.
Warning: Do not use as an anchor.
For technical drawings and 3-D models, click on a part number.