In addition to being lightweight and strong, this plastic framing is nonconductive with good resistance to chemicals and salt water.

Half the weight of steel, this aluminum framing resists corrosion in wet environments.

Fittings come in two pieces to wrap around rails, so you can quickly modify existing structures without disassembling. Use clamp-on framing and fittings to form temporary partitions, modular conveyors, and workstations.

Rails are drilled with consistently spaced holes for multiple mounting options that do not require machining. Use this steel bolt-together framing to build guards, tables, and racks.

Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.

Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.

For compatibility with quick-connect clamps to secure pipe and conduit without screws and tools, this strut channel has narrow slotted holes.

This welded, one-piece strut channel combines two strut channels back-to-back.

These brackets have narrow slots compatible with quick-connect clamps for securing pipe and conduit on the channel side of struts without screws or tools.

Designed to wrap around the sides of strut channel, these brackets provide a stronger hold than other strut channel brackets.

Position two strut channels at a 30° to 60° angle, then tighten the bolt to secure.

Serrated grooves grip the lip of the channel.

Keep a rod securely centered against the strut channel.

Keep hardware centered in the strut channel slot.

For quick mounting of components, these hangers snap into strut channels for a strong hold and easy repositioning.

Provide smooth motion between two pieces of strut channel.

Notches on these washers grip the channel to keep them in place.

Support the corners of strut channel structures.

Connect two channels to create a stacked channel.

Insert these nuts into the long open side of strut channel and twist to secure. A built-in washer enables one-handed installation.

A tab fits tightly against the lip of the channel to keep these nuts from slipping.

Create posts of varying lengths.

Use these round GPO3 fiberglass tubes for electrical applications in humid environments.

An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.

Fit these lightweight tubes inside each other to create adjustable tubes for structural framing, machinery components, and robotics.

Mount these lightweight tubes to flat surfaces in place of aluminum to create structural frames, machinery components, and robotics.

Reduce noise caused by HVAC systems. These sturdy rubber supports isolate vibration caused by heat pumps and air conditioning units, resulting in a quieter facility. When used on roofs, they also keep components above puddled water, which can cause damage.