Overall Width Overall Width |
|---|
|
|
|
Material Material |
|---|
|
Mounting Holes Mounting Holes |
|---|
 |  |
| Without Holes | With Holes |
Leaf Thickness Leaf Thickness |
|---|
|
Pin Type Pin Type |
|---|
 |  |
| Removable | Nonremovable |
 | |
| Lift Off |
Pin Material Pin Material |
|---|
|
For Door Material For Door Material |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
About Hinges
More
Tight-Clearance Piano Hinges
Between Hinge
Leaves
The leaves of these hinges almost touch when the door is closed. They are often used in electrical enclosures for a tight seal. Longer than other hinges, piano hinges run the entire length of doors and lids for strength and durability.
304 stainless steel hinges are more corrosion resistant than low-carbon steel. They also have good chemical resistance.
For technical drawings and 3-D models, click on a part number.
Knuckle | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| O'all Wd. | Pin Dia. | Pin Material | Lg. | Dia. | Range of Motion | 1 ft. | 3 ft. | 6 ft. | |
Low-Carbon Steel—Dull | |||||||||
0.04" Leaf Thick. | |||||||||
| 1 1/2" | 3/32" | Steel | 1/2" | 0.174" | 270° | 00000000 | |||
| 2" | 3/32" | Steel | 1/2" | 0.174" | 270° | 00000000 | |||
0.06" Leaf Thick. | |||||||||
| 1 1/16" | 1/8" | Steel | 1/2" | 0.245" | 270° | 00000000 | |||
| 1 1/2" | 3/16" | Steel | 5/8" | 0.308" | 270° | 00000000 | |||
| 2" | 3/16" | Steel | 1/2" | 0.308" | 270° | 00000000 | |||
| 3" | 3/16" | Steel | 5/8" | 0.308" | 270° | 00000000 | |||
0.075" Leaf Thick. | |||||||||
| 1 1/2" | 1/4" | Steel | 1" | 0.400" | 270° | 00000000 | |||
| 2" | 1/4" | Steel | 1" | 0.400" | 270° | 00000000 | |||
| 2 1/2" | 1/4" | Steel | 1" | 0.400" | 270° | 00000000 | |||
| 3" | 1/4" | Steel | 1" | 0.400" | 270° | 00000000 | |||
0.09" Leaf Thick. | |||||||||
| 2" | 1/4" | Steel | 1" | 0.430" | 270° | 00000000 | |||
| 3" | 1/4" | Steel | 1" | 0.430" | 270° | 00000000 | |||
| 4" | 1/4" | Steel | 1" | 0.430" | 270° | 00000000 | |||
0.12" Leaf Thick. | |||||||||
| 2" | 1/4" | Steel | 2" | 0.490" | 270° | 00000000 | |||
| 3" | 1/4" | Steel | 2" | 0.490" | 270° | 00000000 | |||
304 Stainless Steel—Dull | |||||||||
0.04" Leaf Thick. | |||||||||
| 1 1/2" | 3/32" | 304 Stainless Steel | 1/2" | 0.174" | 270° | 00000000 | |||
| 2" | 3/32" | 304 Stainless Steel | 1/2" | 0.174" | 270° | 00000000 | |||
0.06" Leaf Thick. | |||||||||
| 1 1/16" | 1/8" | 304 Stainless Steel | 1/2" | 0.245" | 270° | 00000000 | |||
| 1 1/2" | 3/16" | 304 Stainless Steel | 5/8" | 0.308" | 270° | 00000000 | |||
| 2" | 3/16" | 304 Stainless Steel | 5/8" | 0.308" | 270° | 00000000 | |||
| 3" | 3/16" | 304 Stainless Steel | 5/8" | 0.308" | 270° | 00000000 | |||
0.075" Leaf Thick. | |||||||||
| 2" | 1/4" | 304 Stainless Steel | 1" | 0.400" | 270° | 00000000 | |||
| 3" | 1/4" | 304 Stainless Steel | 1" | 0.400" | 270° | 00000000 | |||
0.12" Leaf Thick. | |||||||||
| 2" | 1/4" | 304 Stainless Steel | 2" | 0.490" | 270° | 00000000 | |||
| 3" | 1/4" | 304 Stainless Steel | 2" | 0.490" | 270° | 00000000 | |||
Nonstandard Hole Pattern Mortise-Mount Entry Door Hinges
The mounting hole pattern does not follow an industry standard, which means you can work around worn mounting holes when replacing template hinges. Use these hinges on doors without a door closer. Hinges with a nonremovable pin deter tampering.
Zinc-plated low-carbon steel hinges have better corrosion resistance than primed low-carbon steel.
304 stainless steel hinges are more corrosion resistant than zinc-plated low-carbon steel. They also have good chemical resistance.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Pin Dia. | Pin Material | Mounting Fasteners Included | No. of Mounting Holes | Mounting Screw Size | Each | |
Nonremovable Pin | |||||||||||||
For Wood Doors—Square Corner | |||||||||||||
Carbon Steel—Dull | |||||||||||||
| 3" | 1 1/2" | 3" | 1 1/2" | 3" | 0.072" | 270° | 3/16" | Steel | No | 6 | No. 9 | 0000000 | 00000 |
Low-Carbon Steel—Dull | |||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 0.110" | 270° | 17/64" | Steel | No | 6 | No. 9 | 0000000 | 0000 |
| 4" | 2" | 4" | 2" | 4" | 0.110" | 270° | 17/64" | Steel | No | 8 | No. 10 | 0000000 | 0000 |
| 6" | 3" | 6" | 3" | 6" | 0.160" | 270° | 3/8" | Steel | Yes | 10 | 1/4" | 0000000 | 00000 |
Removable Pin | |||||||||||||
For Wood Doors—Round Corner | |||||||||||||
Primed Low-Carbon Steel | |||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 0.085" | 270° | 15/64" | Steel | No | 6 | No. 9 | 0000000 | 0000 |
| 4" | 2" | 4" | 2" | 4" | 0.085" | 270° | 15/64" | Steel | No | 8 | No. 9 | 0000000 | 0000 |
Zinc-Plated Low-Carbon Steel—Dull | |||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 0.085" | 270° | 15/64" | Steel | No | 6 | No. 9 | 0000000 | 0000 |
| 4" | 2" | 4" | 2" | 4" | 0.085" | 270° | 15/64" | Steel | No | 8 | No. 9 | 0000000 | 0000 |
304 Stainless Steel—Dull | |||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 0.085" | 270° | 15/64" | 304 Stainless Steel | No | 6 | No. 9 | 0000000 | 00000 |
| 4" | 2" | 4" | 2" | 4" | 0.085" | 270° | 15/64" | 304 Stainless Steel | No | 8 | No. 9 | 0000000 | 00000 |
For Wood Doors—Square Corner | |||||||||||||
Carbon Steel—Dull | |||||||||||||
| 3" | 1 1/2" | 3" | 1 1/2" | 3" | 0.072" | 270° | 3/16" | Steel | No | 6 | No. 9 | 0000000 | 0000 |
Low-Carbon Steel—Dull | |||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 0.110" | 270° | 17/64" | Steel | No | 6 | No. 9 | 0000000 | 0000 |
| 4" | 2" | 4" | 2" | 4" | 0.110" | 270° | 17/64" | Steel | No | 8 | No. 10 | 0000000 | 0000 |
| 6" | 3" | 6" | 3" | 6" | 0.160" | 270° | 3/8" | Steel | Yes | 10 | 1/4" | 0000000 | 00000 |
Zinc-Plated Low-Carbon Steel—Dull | |||||||||||||
| 3" | 1 1/2" | 3" | 1 1/2" | 3" | 0.085" | 270° | 15/64" | Steel | No | 6 | No. 9 | 0000000 | 0000 |
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 0.085" | 270° | 15/64" | Steel | No | 6 | No. 9 | 0000000 | 0000 |
| 4" | 2" | 4" | 2" | 4" | 0.085" | 270° | 15/64" | Steel | No | 8 | No. 9 | 0000000 | 0000 |
304 Stainless Steel—Dull | |||||||||||||
| 3" | 1 1/2" | 3" | 1 1/2" | 3" | 0.085" | 270° | 15/64" | 304 Stainless Steel | No | 6 | No. 9 | 0000000 | 00000 |
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 0.085" | 270° | 15/64" | 304 Stainless Steel | No | 6 | No. 9 | 0000000 | 00000 |
| 4" | 2" | 4" | 2" | 4" | 0.085" | 270° | 15/64" | 304 Stainless Steel | No | 8 | No. 9 | 0000000 | 00000 |
Mortise-Mount Entry Door Template Hinges
The mounting holes on these hinges form an industry-standard half-moon shape. The hinge leaves fit into cutouts (mortises) to mount flush with door and frame edges. Use these hinges on doors without a door closer. Capacity is based on three hinges per door with a maximum door size of 7 ft. Ht. × 3 ft. Wd. × 1 3/4" Thick.
Chrome-, brass-, and bronze-plated low-carbon steel hinges have better corrosion resistance than primed low-carbon steel.
304 stainless steel hinges are more corrosion resistant than chrome-, brass-, and bronze-plated low-carbon steel. They also have good chemical resistance.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Daily Openings | Capacity, lbs. | Pin Type | Pin Dia. | Pin Material | Mounting Fasteners Included | Each | |
For Hollow Metal and Wood Doors | ||||||||||||||
Primed Low-Carbon Steel | ||||||||||||||
| 3" | 1 1/2" | 3" | 1 1/2" | 3" | 0.097" | 180° | 45 | 40 | Removable | 15/64" | Steel | Yes | 0000000 | 000000 |
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 0.119" | 180° | 205 | 45 | Removable | 17/64" | Steel | Yes | 0000000 | 0000 |
| 4" | 2" | 4" | 2" | 4" | 0.129" | 180° | 205 | 60 | Removable | 17/64" | Steel | Yes | 0000000 | 0000 |
| 4 1/2" | 2" | 4 1/2" | 2" | 4" | 0.134" | 180° | 205 | 75 | Removable | 5/16" | Steel | Yes | 0000000 | 0000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.134" | 180° | 205 | 75 | Removable | 5/16" | Steel | Yes | 0000000 | 0000 |
| 5" | 2 1/4" | 5" | 2 1/4" | 4 1/2" | 0.145" | 180° | 205 | 100 | Removable | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2 1/2" | 5" | 2 1/2" | 5" | 0.145" | 180° | 205 | 100 | Removable | 21/64" | Steel | Yes | 0000000 | 00000 |
Chrome-Plated Low-Carbon Steel—Dull | ||||||||||||||
| 3" | 1 1/2" | 3" | 1 1/2" | 3" | 0.097" | 180° | 45 | 40 | Removable | 15/64" | Steel | Yes | 0000000 | 00000 |
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 0.119" | 180° | 205 | 45 | Removable | 17/64" | Steel | Yes | 0000000 | 0000 |
| 4" | 2" | 4" | 2" | 4" | 0.129" | 180° | 205 | 60 | Removable | 17/64" | Steel | Yes | 0000000 | 0000 |
| 4 1/2" | 2" | 4 1/2" | 2" | 4" | 0.134" | 180° | 205 | 75 | Removable | 5/16" | Steel | Yes | 0000000 | 0000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.134" | 180° | 205 | 75 | Removable | 5/16" | Steel | Yes | 0000000 | 0000 |
| 5" | 2 1/4" | 5" | 2 1/4" | 4 1/2" | 0.145" | 180° | 205 | 100 | Removable | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2 1/2" | 5" | 2 1/2" | 5" | 0.145" | 180° | 205 | 100 | Removable | 21/64" | Steel | Yes | 0000000 | 00000 |
Brass-Plated Low-Carbon Steel—Dull | ||||||||||||||
| 3" | 1 1/2" | 3" | 1 1/2" | 3" | 0.097" | 180° | 45 | 40 | Removable | 15/64" | Steel | Yes | 0000000 | 00000 |
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 0.119" | 180° | 205 | 45 | Removable | 17/64" | Steel | Yes | 0000000 | 0000 |
| 4" | 2" | 4" | 2" | 4" | 0.129" | 180° | 205 | 60 | Removable | 17/64" | Steel | Yes | 0000000 | 0000 |
| 4 1/2" | 2" | 4 1/2" | 2" | 4" | 0.134" | 180° | 205 | 75 | Removable | 5/16" | Steel | Yes | 0000000 | 0000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.134" | 180° | 205 | 75 | Removable | 5/16" | Steel | Yes | 0000000 | 0000 |
| 5" | 2 1/4" | 5" | 2 1/4" | 4 1/2" | 0.145" | 180° | 205 | 100 | Removable | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2 1/2" | 5" | 2 1/2" | 5" | 0.145" | 180° | 205 | 100 | Removable | 21/64" | Steel | Yes | 0000000 | 00000 |
Brass-Plated Low-Carbon Steel—Polished | ||||||||||||||
| 3" | 1 1/2" | 3" | 1 1/2" | 3" | 0.097" | 180° | 45 | 40 | Removable | 15/64" | Steel | Yes | 0000000 | 00000 |
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 0.119" | 180° | 205 | 45 | Removable | 17/64" | Steel | Yes | 0000000 | 0000 |
| 4" | 2" | 4" | 2" | 4" | 0.129" | 180° | 205 | 60 | Removable | 17/64" | Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2" | 4 1/2" | 2" | 4" | 0.134" | 180° | 205 | 75 | Removable | 5/16" | Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.134" | 180° | 205 | 75 | Removable | 5/16" | Steel | Yes | 0000000 | 00000 |
| 5" | 2 1/4" | 5" | 2 1/4" | 4 1/2" | 0.145" | 180° | 205 | 100 | Removable | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2 1/2" | 5" | 2 1/2" | 5" | 0.145" | 180° | 205 | 100 | Removable | 21/64" | Steel | Yes | 0000000 | 00000 |
Bronze-Plated Low-Carbon Steel—Dull | ||||||||||||||
| 3" | 1 1/2" | 3" | 1 1/2" | 3" | 0.097" | 180° | 45 | 40 | Removable | 15/64" | Steel | Yes | 0000000 | 00000 |
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 0.119" | 180° | 205 | 45 | Removable | 17/64" | Steel | Yes | 0000000 | 0000 |
| 4" | 2" | 4" | 2" | 4" | 0.129" | 180° | 205 | 60 | Removable | 17/64" | Steel | Yes | 0000000 | 0000 |
| 4 1/2" | 2" | 4 1/2" | 2" | 4" | 0.134" | 180° | 205 | 75 | Removable | 5/16" | Steel | Yes | 0000000 | 0000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.134" | 180° | 205 | 75 | Removable | 5/16" | Steel | Yes | 0000000 | 0000 |
| 5" | 2 1/4" | 5" | 2 1/4" | 4 1/2" | 0.145" | 180° | 205 | 100 | Removable | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2 1/2" | 5" | 2 1/2" | 5" | 0.145" | 180° | 205 | 100 | Removable | 21/64" | Steel | Yes | 0000000 | 00000 |
304 Stainless Steel—Dull | ||||||||||||||
| 3" | 1 1/2" | 3" | 1 1/2" | 3" | 0.097" | 180° | 45 | 40 | Removable | 15/64" | 304 Stainless Steel | Yes | 0000000 | 000000 |
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 0.119" | 180° | 205 | 45 | Removable | 17/64" | 304 Stainless Steel | Yes | 0000000 | 00000 |
| 4" | 2" | 4" | 2" | 4" | 0.129" | 180° | 205 | 60 | Removable | 17/64" | 304 Stainless Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2" | 4 1/2" | 2" | 4" | 0.134" | 180° | 205 | 75 | Removable | 5/16" | 304 Stainless Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.134" | 180° | 205 | 75 | Removable | 5/16" | 304 Stainless Steel | Yes | 0000000 | 00000 |
Maintenance-Free Mortise-Mount Entry Door Template Hinges
No need for oil or grease, these hinges are maintenance free. The mounting holes form an industry-standard half-moon shape. The hinge leaves fit into cutouts (mortises) to mount flush with door and frame edges. Use these hinges on doors with or without a door closer. All have concealed bearings to open and close doors smoothly. Capacity is based on three hinges per door with a maximum door size of 7 ft. Ht. × 3 ft. Wd. × 1 3/4" Thick.
Chrome-, brass-, and bronze-plated low-carbon steel hinges have better corrosion resistance than primed low-carbon steel.
304 stainless steel hinges are more corrosion resistant than chrome-, brass-, and bronze-plated low-carbon steel. They also have good chemical resistance.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Capacity, lbs. | Pin Type | Pin Dia. | Pin Material | Mounting Fasteners Included | Each | |
For Hollow Metal and Wood Doors | |||||||||||||
Primed Low-Carbon Steel | |||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 0.119" | 180° | 100 | Removable | 17/64" | Steel | Yes | 00000000 | 000000 |
| 4" | 2" | 4" | 2" | 4" | 0.129" | 180° | 125 | Removable | 17/64" | Steel | Yes | 00000000 | 00000 |
| 4 1/2" | 2" | 4 1/2" | 2" | 4" | 0.134" | 180° | 150 | Removable | 5/16" | Steel | Yes | 00000000 | 00000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.134" | 180° | 150 | Removable | 5/16" | Steel | Yes | 00000000 | 00000 |
| 5" | 2 1/2" | 5" | 2 1/2" | 5" | 0.145" | 180° | 175 | Removable | 21/64" | Steel | Yes | 00000000 | 00000 |
Chrome-Plated Low-Carbon Steel—Dull | |||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 0.119" | 180° | 100 | Removable | 17/64" | Steel | Yes | 00000000 | 00000 |
| 4" | 2" | 4" | 2" | 4" | 0.129" | 180° | 125 | Removable | 17/64" | Steel | Yes | 00000000 | 00000 |
| 4 1/2" | 2" | 4 1/2" | 2" | 4" | 0.134" | 180° | 150 | Removable | 5/16" | Steel | Yes | 00000000 | 00000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.134" | 180° | 150 | Removable | 5/16" | Steel | Yes | 00000000 | 00000 |
| 5" | 2 1/2" | 5" | 2 1/2" | 5" | 0.145" | 180° | 175 | Removable | 21/64" | Steel | Yes | 00000000 | 00000 |
Brass-Plated Low-Carbon Steel—Dull | |||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 0.119" | 180° | 100 | Removable | 17/64" | Steel | Yes | 00000000 | 00000 |
| 4" | 2" | 4" | 2" | 4" | 0.129" | 180° | 125 | Removable | 17/64" | Steel | Yes | 00000000 | 00000 |
| 4 1/2" | 2" | 4 1/2" | 2" | 4" | 0.134" | 180° | 150 | Removable | 5/16" | Steel | Yes | 00000000 | 00000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.134" | 180° | 150 | Removable | 5/16" | Steel | Yes | 00000000 | 00000 |
| 5" | 2 1/2" | 5" | 2 1/2" | 5" | 0.145" | 180° | 175 | Removable | 21/64" | Steel | Yes | 00000000 | 00000 |
Brass-Plated Low-Carbon Steel—Polished | |||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 0.119" | 180° | 100 | Removable | 17/64" | Steel | Yes | 00000000 | 00000 |
| 4" | 2" | 4" | 2" | 4" | 0.129" | 180° | 125 | Removable | 17/64" | Steel | Yes | 00000000 | 00000 |
| 4 1/2" | 2" | 4 1/2" | 2" | 4" | 0.134" | 180° | 150 | Removable | 5/16" | Steel | Yes | 00000000 | 00000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.134" | 180° | 150 | Removable | 5/16" | Steel | Yes | 00000000 | 00000 |
| 5" | 2 1/2" | 5" | 2 1/2" | 5" | 0.145" | 180° | 175 | Removable | 21/64" | Steel | Yes | 00000000 | 00000 |
Bronze-Plated Low-Carbon Steel—Dull | |||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 0.119" | 180° | 100 | Removable | 17/64" | Steel | Yes | 00000000 | 00000 |
| 4" | 2" | 4" | 2" | 4" | 0.129" | 180° | 125 | Removable | 17/64" | Steel | Yes | 00000000 | 00000 |
| 4 1/2" | 2" | 4 1/2" | 2" | 4" | 0.134" | 180° | 150 | Removable | 5/16" | Steel | Yes | 00000000 | 00000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.134" | 180° | 150 | Removable | 5/16" | Steel | Yes | 00000000 | 00000 |
| 5" | 2 1/2" | 5" | 2 1/2" | 5" | 0.145" | 180° | 175 | Removable | 21/64" | Steel | Yes | 00000000 | 00000 |
304 Stainless Steel—Dull | |||||||||||||
| 4 1/2" | 2" | 4 1/2" | 2" | 4" | 0.134" | 180° | 150 | Removable | 5/16" | 304 Stainless Steel | Yes | 00000000 | 00000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.134" | 180° | 150 | Removable | 5/16" | 304 Stainless Steel | Yes | 00000000 | 00000 |
| 5" | 2 1/2" | 5" | 2 1/2" | 5" | 0.145" | 180° | 175 | Removable | 21/64" | 304 Stainless Steel | Yes | 00000000 | 00000 |
Mortise-Mount Entry Door Template Hinges with Bearings
Bearings allow these hinges to open and close doors smoothly. The mounting holes form an industry-standard half-moon shape. The hinge leaves fit into cutouts (mortises) to mount flush with door and frame edges. Use these hinges on doors with or without a door closer. Capacity is based on three hinges per door with a maximum door size of 7 ft. Ht. × 3 ft. Wd. × 1 3/4" Thick. Hinges with a nonremovable pin deter tampering.
Chrome-, brass-, and bronze-plated low-carbon steel hinges have better corrosion resistance than primed low-carbon steel.
304 and 305 stainless steel hinges are more corrosion resistant than chrome-, brass-, and bronze-plated low-carbon steel. They also have good chemical resistance.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Daily Openings | Capacity, lbs. | Pin Dia. | Pin Material | Mounting Fasteners Included | Each | |
Nonremovable Pin | |||||||||||||
For Hollow Metal and Wood Doors | |||||||||||||
Primed Low-Carbon Steel | |||||||||||||
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.134" | 180° | 205 | 150 | 5/16" | Steel | Yes | 0000000 | 000000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.180" | 180° | 340 | 150 | 21/64" | Steel | Yes | 0000000 | 00000 |
Chrome-Plated Low-Carbon Steel—Dull | |||||||||||||
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.134" | 180° | 205 | 150 | 5/16" | Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.180" | 180° | 340 | 150 | 21/64" | Steel | Yes | 0000000 | 00000 |
Brass-Plated Low-Carbon Steel—Dull | |||||||||||||
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.134" | 180° | 205 | 150 | 5/16" | Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.180" | 180° | 340 | 150 | 21/64" | Steel | Yes | 0000000 | 00000 |
Brass-Plated Low-Carbon Steel—Polished | |||||||||||||
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.134" | 180° | 205 | 150 | 5/16" | Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.180" | 180° | 340 | 150 | 21/64" | Steel | Yes | 0000000 | 00000 |
Bronze-Plated Low-Carbon Steel—Dull | |||||||||||||
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.134" | 180° | 205 | 150 | 5/16" | Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.180" | 180° | 340 | 150 | 21/64" | Steel | Yes | 0000000 | 00000 |
304 Stainless Steel—Dull | |||||||||||||
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.134" | 180° | 205 | 150 | 5/16" | 304 Stainless Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.180" | 180° | 340 | 150 | 21/64" | 304 Stainless Steel | Yes | 0000000 | 00000 |
Removable Pin | |||||||||||||
For Hollow Metal and Wood Doors | |||||||||||||
Primed Low-Carbon Steel | |||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 0.119" | 180° | 205 | 100 | 17/64" | Steel | Yes | 0000000 | 00000 |
| 4" | 2" | 4" | 2" | 4" | 0.129" | 180° | 205 | 125 | 17/64" | Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2" | 4 1/2" | 2" | 4" | 0.134" | 180° | 205 | 150 | 5/16" | Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2" | 4 1/2" | 2" | 4" | 0.180" | 180° | 340 | 150 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.134" | 180° | 205 | 150 | 5/16" | Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.180" | 180° | 340 | 150 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2" | 5" | 2" | 4" | 0.145" | 180° | 205 | 175 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2" | 5" | 2" | 4" | 0.190" | 180° | 340 | 175 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2 1/4" | 5" | 2 1/4" | 4 1/2" | 0.145" | 180° | 205 | 175 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2 1/4" | 5" | 2 1/4" | 4 1/2" | 0.190" | 180° | 340 | 175 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2 1/2" | 5" | 2 1/2" | 5" | 0.145" | 180° | 205 | 175 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2 1/2" | 5" | 2 1/2" | 5" | 0.190" | 180° | 340 | 175 | 21/64" | Steel | Yes | 0000000 | 00000 |
Chrome-Plated Low-Carbon Steel—Dull | |||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 0.119" | 180° | 205 | 100 | 17/64" | Steel | Yes | 0000000 | 00000 |
| 4" | 2" | 4" | 2" | 4" | 0.129" | 180° | 205 | 125 | 17/64" | Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2" | 4 1/2" | 2" | 4" | 0.134" | 180° | 205 | 150 | 5/16" | Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2" | 4 1/2" | 2" | 4" | 0.180" | 180° | 340 | 150 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.134" | 180° | 205 | 150 | 5/16" | Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.180" | 180° | 340 | 150 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2" | 5" | 2" | 4" | 0.145" | 180° | 205 | 175 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2" | 5" | 2" | 4" | 0.190" | 180° | 340 | 175 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2 1/4" | 5" | 2 1/4" | 4 1/2" | 0.145" | 180° | 205 | 175 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2 1/4" | 5" | 2 1/4" | 4 1/2" | 0.190" | 180° | 340 | 175 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2 1/2" | 5" | 2 1/2" | 5" | 0.145" | 180° | 205 | 175 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2 1/2" | 5" | 2 1/2" | 5" | 0.190" | 180° | 340 | 175 | 21/64" | Steel | Yes | 0000000 | 00000 |
Brass-Plated Low-Carbon Steel—Dull | |||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 0.119" | 180° | 205 | 100 | 17/64" | Steel | Yes | 0000000 | 00000 |
| 4" | 2" | 4" | 2" | 4" | 0.129" | 180° | 205 | 125 | 17/64" | Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2" | 4 1/2" | 2" | 4" | 0.134" | 180° | 205 | 150 | 5/16" | Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2" | 4 1/2" | 2" | 4" | 0.180" | 180° | 340 | 150 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.134" | 180° | 205 | 150 | 5/16" | Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.180" | 180° | 340 | 150 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2" | 5" | 2" | 4" | 0.145" | 180° | 205 | 175 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2 1/4" | 5" | 2 1/4" | 4 1/2" | 0.145" | 180° | 205 | 175 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2 1/4" | 5" | 2 1/4" | 4 1/2" | 0.190" | 180° | 340 | 175 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2 1/2" | 5" | 2 1/2" | 5" | 0.145" | 180° | 205 | 175 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2 1/2" | 5" | 2 1/2" | 5" | 0.190" | 180° | 340 | 175 | 21/64" | Steel | Yes | 0000000 | 00000 |
Brass-Plated Low-Carbon Steel—Polished | |||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 0.119" | 180° | 205 | 100 | 17/64" | Steel | Yes | 0000000 | 00000 |
| 4" | 2" | 4" | 2" | 4" | 0.129" | 180° | 205 | 125 | 17/64" | Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2" | 4 1/2" | 2" | 4" | 0.134" | 180° | 205 | 150 | 5/16" | Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2" | 4 1/2" | 2" | 4" | 0.180" | 180° | 340 | 150 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.134" | 180° | 205 | 150 | 5/16" | Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.180" | 180° | 340 | 150 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2" | 5" | 2" | 4" | 0.145" | 180° | 205 | 175 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2" | 5" | 2" | 4" | 0.190" | 180° | 340 | 175 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2 1/4" | 5" | 2 1/4" | 4 1/2" | 0.145" | 180° | 205 | 175 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2 1/4" | 5" | 2 1/4" | 4 1/2" | 0.190" | 180° | 340 | 175 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2 1/2" | 5" | 2 1/2" | 5" | 0.145" | 180° | 205 | 175 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2 1/2" | 5" | 2 1/2" | 5" | 0.190" | 180° | 340 | 175 | 21/64" | Steel | Yes | 0000000 | 00000 |
Bronze-Plated Low-Carbon Steel—Dull | |||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 0.119" | 180° | 205 | 100 | 17/64" | Steel | Yes | 0000000 | 00000 |
| 4" | 2" | 4" | 2" | 4" | 0.129" | 180° | 205 | 125 | 17/64" | Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2" | 4 1/2" | 2" | 4" | 0.134" | 180° | 205 | 150 | 5/16" | Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2" | 4 1/2" | 2" | 4" | 0.180" | 180° | 340 | 150 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.134" | 180° | 205 | 150 | 5/16" | Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.180" | 180° | 340 | 150 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2" | 5" | 2" | 4" | 0.145" | 180° | 205 | 175 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2" | 5" | 2" | 4" | 0.190" | 180° | 340 | 175 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2 1/4" | 5" | 2 1/4" | 4 1/2" | 0.145" | 180° | 205 | 175 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2 1/4" | 5" | 2 1/4" | 4 1/2" | 0.190" | 180° | 340 | 175 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2 1/2" | 5" | 2 1/2" | 5" | 0.145" | 180° | 205 | 175 | 21/64" | Steel | Yes | 0000000 | 00000 |
| 5" | 2 1/2" | 5" | 2 1/2" | 5" | 0.190" | 180° | 340 | 175 | 21/64" | Steel | Yes | 0000000 | 00000 |
304 Stainless Steel—Dull | |||||||||||||
| 4" | 2" | 4" | 2" | 4" | 0.129" | 180° | 205 | 125 | 17/64" | 304 Stainless Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2" | 4 1/2" | 2" | 4" | 0.134" | 180° | 205 | 150 | 5/16" | 304 Stainless Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2" | 4 1/2" | 2" | 4" | 0.180" | 180° | 340 | 150 | 21/64" | 304 Stainless Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.134" | 180° | 205 | 150 | 5/16" | 304 Stainless Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.180" | 180° | 340 | 150 | 21/64" | 304 Stainless Steel | Yes | 0000000 | 00000 |
| 5" | 2 1/4" | 5" | 2 1/4" | 4 1/2" | 0.190" | 180° | 340 | 175 | 21/64" | 304 Stainless Steel | Yes | 0000000 | 00000 |
| 5" | 2 1/2" | 5" | 2 1/2" | 5" | 0.145" | 180° | 205 | 175 | 21/64" | 304 Stainless Steel | Yes | 0000000 | 00000 |
| 5" | 2 1/2" | 5" | 2 1/2" | 5" | 0.190" | 180° | 340 | 175 | 21/64" | 304 Stainless Steel | Yes | 0000000 | 00000 |
305 Stainless Steel—Dull | |||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 0.119" | 180° | 205 | 100 | 17/64" | 305 Stainless Steel | Yes | 0000000 | 00000 |
Tamper-Resistant Mortise-Mount Entry Door Template Hinges with Bearings
A stud projects from the back of each hinge leaf to prevent the door from being forced open. The mounting holes form an industry-standard half-moon shape. The hinge leaves fit into cutouts (mortises) to mount flush with door and frame edges. Use this hinge on doors with or without a door closer. It has concealed bearings to open and close doors smoothly. Also known as a hospital-tip hinge, the top and bottom of the hinge pin are cut on an angle. The pin is nonremovable to provide additional tamper resistance. Capacity is based on three hinges per door with a maximum door size of 7 ft. Ht. × 3 ft. Wd. × 1 3/4" Thick.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Daily Openings | Capacity, lbs. | Pin Dia. | Pin Material | Mounting Fasteners Included | Each | |
For Hollow Metal and Wood Doors | |||||||||||||
Low-Carbon Steel—Dull | |||||||||||||
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.187" | 180° | 55 | 200 | 5/16" | 304 Stainless Steel | Yes | 0000000 | 000000 |
| 5" | 2 1/2" | 5" | 2 1/2" | 5" | 0.187" | 180° | 55 | 200 | 5/16" | 304 Stainless Steel | Yes | 0000000 | 00000 |
304 Stainless Steel—Dull | |||||||||||||
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.187" | 180° | 55 | 200 | 5/16" | 304 Stainless Steel | Yes | 0000000 | 000000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.187" | 180° | 55 | 250 | 3/8" | 304 Stainless Steel | Yes | 0000000 | 00000 |
| 5" | 2 1/2" | 5" | 2 1/2" | 5" | 0.187" | 180° | 55 | 200 | 5/16" | 304 Stainless Steel | Yes | 0000000 | 000000 |
Lift-Off Entry Door Hinges
The hinge pin is permanently attached to the frame leaf so you can quickly lift the door off the hinge without removing the pin. These hinges have mounting holes that form an industry-standard half-moon shape. The hinge leaves fit into cutouts (mortises) to mount flush with door and frame edges. Capacity is based on three hinges per door with a maximum door size of 7' Ht. × 3' Wd. × 1 3/4" Thick. To choose a door mounting location, stand on the pull side of the door—use a right-side hinge if the hinge is on the right or a left-side hinge if it’s on the left.
Chrome-plated low-carbon steel hinges have better corrosion resistance than primed low-carbon steel.
304 stainless steel hinges are more corrosion resistant than chrome-plated low-carbon steel. They also have good chemical resistance.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Capacity, lbs. | Pin Dia. | Pin Material | Mounting Fasteners Included | Each | |
Left Side Door Mounting Location | ||||||||||||
Primed Low-Carbon Steel | ||||||||||||
| 4 1/2" | 2" | 4 1/2" | 2" | 4" | 0.134" | 180° | 150 | 5/16" | Steel | Yes | 0000000 | 000000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.134" | 180° | 150 | 5/16" | Steel | Yes | 0000000 | 00000 |
Chrome-Plated Low-Carbon Steel—Dull | ||||||||||||
| 4 1/2" | 2" | 4 1/2" | 2" | 4" | 0.134" | 180° | 150 | 5/16" | Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.134" | 180° | 150 | 5/16" | Steel | Yes | 0000000 | 00000 |
304 Stainless Steel—Dull | ||||||||||||
| 4 1/2" | 2" | 4 1/2" | 2" | 4" | 0.134" | 180° | 150 | 5/16" | 304 Stainless Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.134" | 180° | 150 | 5/16" | 304 Stainless Steel | Yes | 0000000 | 00000 |
Right Side Door Mounting Location | ||||||||||||
Primed Low-Carbon Steel | ||||||||||||
| 4 1/2" | 2" | 4 1/2" | 2" | 4" | 0.134" | 180° | 150 | 5/16" | Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.134" | 180° | 150 | 5/16" | Steel | Yes | 0000000 | 00000 |
Chrome-Plated Low-Carbon Steel—Dull | ||||||||||||
| 4 1/2" | 2" | 4 1/2" | 2" | 4" | 0.134" | 180° | 150 | 5/16" | Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.134" | 180° | 150 | 5/16" | Steel | Yes | 0000000 | 00000 |
304 Stainless Steel—Dull | ||||||||||||
| 4 1/2" | 2" | 4 1/2" | 2" | 4" | 0.134" | 180° | 150 | 5/16" | 304 Stainless Steel | Yes | 0000000 | 00000 |
| 4 1/2" | 2 1/4" | 4 1/2" | 2 1/4" | 4 1/2" | 0.134" | 180° | 150 | 5/16" | 304 Stainless Steel | Yes | 0000000 | 00000 |
Mortise-Mount Hinges with Holes
Hinge leaves fit into two cutouts (mortises) to mount flush with the door and frame. Hinges with a nonremovable pin deter tampering.
Zinc-plated low-carbon steel hinges have mild corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Pin Dia. | Pin Material | Mounting Fasteners Included | No. of Mounting Holes | Mounting Hole Style | Mounting Screw Size | Each | |
Nonremovable Pin | ||||||||||||||
For Wood Doors | ||||||||||||||
Carbon Steel—Dull | ||||||||||||||
| 2" | 1" | 2" | 1" | 2" | 0.072" | 270° | 3/16" | Steel | No | 4 | Countersunk | No. 7 | 0000000 | 00000 |
| 2 1/2" | 1 1/4" | 2 1/2" | 1 1/4" | 2 1/2" | 0.072" | 270° | 3/16" | Steel | No | 6 | Countersunk | No. 8 | 0000000 | 0000 |
Low-Carbon Steel—Dull | ||||||||||||||
| 1" | 1/2" | 1" | 1/2" | 1" | 0.050" | 270° | 3/32" | Steel | No | 4 | Countersunk | No. 4 | 0000000 | 0000 |
| 1 1/2" | 11/16" | 1 1/2" | 11/16" | 1 3/8" | 0.050" | 270° | 1/8" | Steel | No | 4 | Countersunk | No. 5 | 0000000 | 0000 |
| 2" | 25/32" | 2" | 25/32" | 1 9/16" | 0.050" | 270° | 1/8" | Steel | No | 4 | Countersunk | No. 6 | 0000000 | 0000 |
| 2 1/2" | 7/8" | 2 1/2" | 7/8" | 1 3/4" | 0.055" | 270° | 1/8" | Steel | No | 6 | Countersunk | No. 6 | 0000000 | 0000 |
| 3" | 1" | 3" | 1" | 2" | 0.060" | 270° | 5/32" | Steel | No | 6 | Countersunk | No. 7 | 0000000 | 0000 |
Zinc-Plated Low-Carbon Steel—Dull | ||||||||||||||
| 1" | 1/2" | 1" | 1/2" | 1" | 0.050" | 270° | 3/32" | Steel | No | 4 | Countersunk | No. 4 | 0000000 | 0000 |
| 1 1/2" | 11/16" | 1 1/2" | 11/16" | 1 3/8" | 0.050" | 270° | 1/8" | Steel | No | 4 | Countersunk | No. 5 | 0000000 | 0000 |
| 2" | 25/32" | 2" | 25/32" | 1 9/16" | 0.050" | 270° | 1/8" | Steel | No | 4 | Countersunk | No. 6 | 0000000 | 0000 |
| 2 1/2" | 7/8" | 2 1/2" | 7/8" | 1 3/4" | 0.055" | 270° | 1/8" | Steel | No | 6 | Countersunk | No. 6 | 0000000 | 0000 |
| 3" | 1" | 3" | 1" | 2" | 0.060" | 270° | 5/32" | Steel | No | 6 | Countersunk | No. 7 | 0000000 | 0000 |
Removable Pin | ||||||||||||||
For Wood Doors | ||||||||||||||
Carbon Steel—Dull | ||||||||||||||
| 2" | 1" | 2" | 1" | 2" | 0.072" | 270° | 3/16" | Steel | No | 4 | Countersunk | No. 7 | 0000000 | 000 |
| 2 1/2" | 1 1/4" | 2 1/2" | 1 1/4" | 2 1/2" | 0.072" | 270° | 3/16" | Steel | No | 6 | Countersunk | No. 8 | 0000000 | 0000 |
Low-Carbon Steel—Dull | ||||||||||||||
| 1" | 1/2" | 1" | 1/2" | 1" | 0.050" | 270° | 3/32" | Steel | No | 4 | Countersunk | No. 4 | 0000000 | 0000 |
| 1 1/2" | 11/16" | 1 1/2" | 11/16" | 1 3/8" | 0.050" | 270° | 1/8" | Steel | No | 4 | Countersunk | No. 5 | 0000000 | 0000 |
| 2" | 25/32" | 2" | 25/32" | 1 9/16" | 0.050" | 270° | 1/8" | Steel | No | 4 | Countersunk | No. 6 | 0000000 | 0000 |
| 2 1/2" | 7/8" | 2 1/2" | 7/8" | 1 3/4" | 0.055" | 270° | 1/8" | Steel | No | 6 | Countersunk | No. 6 | 0000000 | 0000 |
| 3" | 1" | 3" | 1" | 2" | 0.060" | 270° | 5/32" | Steel | No | 6 | Countersunk | No. 7 | 0000000 | 0000 |
Zinc-Plated Low-Carbon Steel—Dull | ||||||||||||||
| 1" | 1/2" | 1" | 1/2" | 1" | 0.050" | 270° | 3/32" | Steel | No | 4 | Countersunk | No. 4 | 0000000 | 0000 |
| 1 1/2" | 11/16" | 1 1/2" | 11/16" | 1 3/8" | 0.050" | 270° | 1/8" | Steel | No | 4 | Countersunk | No. 5 | 0000000 | 0000 |
| 2" | 25/32" | 2" | 25/32" | 1 9/16" | 0.050" | 270° | 1/8" | Steel | No | 4 | Countersunk | No. 6 | 0000000 | 0000 |
| 2 1/2" | 7/8" | 2 1/2" | 7/8" | 1 3/4" | 0.055" | 270° | 1/8" | Steel | No | 6 | Countersunk | No. 6 | 0000000 | 0000 |
| 3" | 1" | 3" | 1" | 2" | 0.060" | 270° | 5/32" | Steel | No | 6 | Countersunk | No. 7 | 0000000 | 0000 |
Extra-Wide Mortise-Mount Hinges with Holes
Open doors past their frame to make extra room for people and large items, such as carts, furniture, and wheelchairs, to pass through. Because these setback hinges create wider doorways, they help reduce the risk of bumping and damaging the door and frame. The leaves on these hinges fit into cutouts (mortises), so they mount flush with the surface of the frame and door. All of these hinges are ADA compliant when correctly installed.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Height | Width | Height | Width | Overall Width | Leaf Thickness | Range of Motion | Pin Type | Pin Diameter | Pin Material | Mounting Fasteners Included | Specifications Met | Each | |
For Hollow Metal and Wood Doors | |||||||||||||
Nickel-Plated Low-Carbon Steel—Dull | |||||||||||||
| 3 1/2" | 1 5/8" | 3 1/2" | 1 5/8" | 3 5/8" | 0.086" | 180° | Nonremovable | 27/64" | Steel | Yes | ADA Compliant | 00000000 | 000000 |
| 4" | 2" | 4" | 2" | 4 1/2" | 0.123" | 180° | Nonremovable | 35/64" | Steel | Yes | ADA Compliant | 00000000 | 00000 |
Mortise-Mount Lift-Off Hinges with Holes
Hinge leaves fit into two cutouts (mortises) to mount flush with the door and frame. The hinge pin is permanently attached to the frame leaf so you can quickly lift the door off the hinge without removing the pin. Capacity is based on two hinges per door.
Brass hinges are mildly corrosion resistant.
304 stainless steel hinges resist corrosion better than brass. They also have good chemical resistance.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Capacity, lbs. | Door Mounting Location | Pin Dia. | Pin Material | Mounting Fasteners Included | Each | |
Brass—Dull | ||||||||||||||
| 1 | 2 1/2" | 7/8" | 2 1/2" | 7/8" | 1 3/4" | 0.104" | 270° | Not Rated | Left Side | 3/16" | Brass | Yes | 000000000 | 000000 |
| 1 | 2 1/2" | 7/8" | 2 1/2" | 7/8" | 1 3/4" | 0.104" | 270° | Not Rated | Right Side | 3/16" | Brass | Yes | 000000000 | 00000 |
304 Stainless Steel—Dull | ||||||||||||||
| 2 | 2" | 1 31/32" | 2" | 1 31/32" | 3 15/16" | 0.118" | 270° | 85 | Reversible | 25/64" | 304 Stainless Steel | Yes | 00000000 | 00000 |
| 2 | 2 1/2" | 1 25/32" | 2 1/2" | 1 25/32" | 3 9/16" | 0.118" | 270° | 110 | Reversible | 15/32" | 304 Stainless Steel | Yes | 00000000 | 00000 |