Compress sleeves with more force than hydraulic hand tools.

These compression sleeves are designed to meet lifting specifications.

Keep multiple sleeves on hand in a variety of sizes.

Also known as socket-end swage fittings, install these ball-with-shank-end fittings with a roller swage press for a strong, permanent hold.

Also known as socket-end swage fittings, install these clevis-end fittings with a roller swage press for a strong, permanent hold.

Form 45° flares in aluminum, brass, or copper tubing so it’s compatible with flared tube fittings often used in low-pressure plumbing, air conditioning, and refrigeration systems.

Tap this tool with a hammer to quickly form 45° flared ends in copper tubing.

Flare soft metal tubing.

Mount these flarers in a vise and create single and double 37° and 45° flares.

Enlarge the end of a tube to allow a second piece of the same diameter to fit inside.

Designed for building and maintaining equipment with tubes that pass through perforated metal sheets, these expanders have rollers and tapered noses to ensure uniform tube tightness.

Create 45° flares for low-pressure applications.

Restore tube ends with a few light blows of a hammer.

Use a hammer strike or a vise to crimp ferrules onto your hose and secure barbed hose fittings.

Individual dies allow you to crimp large sizes of air and water hose from 3/4" to 1 3/8" OD.

Install low-profile band clamps, or fit a cutting adapter over the tool to install Extra-Strength Low-Profile Band Clamps.

This tool is longer than the light duty tool for increased leverage.

This optional tool offers a quick and easy way to connect large quantities of barbed fittings to push-on hose. Use the built-in cutter to squarely cut push-on hose without fraying. Then, clamp the hose into the tool’s vise and apply light pressure on the handle to drive into the fitting.

Crimp pinch clamps closed on hose and tube. Also known as pinch clamp pincers.