Material Material |
|---|
|
Movement Movement |
|---|
 |  |
| 180° Pivot | 360° Swivel |
Load Securement Type Load Securement Type |
|---|
 |  |
| Anchor Point | Track System |
Capacity Capacity |
|---|
|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Base Material Base Material |
|---|
|
Ring Material Ring Material |
|---|
|
Swiveling Weld-On Tie-Down Rings
These rings swivel all the way around to accommodate ties in any direction. Weld them to any surface for a more secure connection than other tie-down rings.
Style B rings are angled, making it easier to attach bulky ties and straps. They also protect ties and straps from abrasion to prevent them from wearing down over time.
Warning: Never use for lifting applications.
Swiveling Tie-Down Rings
Accommodate ties in any direction with these rings that swivel all the way around.
Style B has a loose ring that twists to minimize abrasion on webbing and rope.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Ring | Base | Mounting Holes | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Capacity, lbs. | Inner Wd. | Ht. | Thick. | Style | Lg. | Wd. | Material | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Lg. | Ctr.-to-Ctr. Wd. | For Mounting Screw Size | Each | |
18-8 Stainless Steel | ||||||||||||||||
| A | 200 | 5/8" | 1 9/32" | 3/16" | Round | 1 3/16" | 1 1/4" | 18-8 Stainless Steel | No | 4 | 5/32" | 7/8" | 11/16" | No. 8 | 0000000 | 00000 |
| A | 300 | 3/4" | 1 9/16" | 1/4" | Round | 1 9/16" | 1 5/16" | 18-8 Stainless Steel | No | 4 | 5/32" | 1" | 3/4" | No. 8 | 0000000 | 0000 |
| A | 480 | 3/4" | 1 13/16" | 5/16" | Round | 1 15/16" | 1 9/16" | 18-8 Stainless Steel | No | 4 | 3/16" | 1 3/8" | 1" | No. 8 | 0000000 | 0000 |
| B | 200 | 1 3/16" | 2 1/2" | 3/16" | Round | 1 3/16" | 1 1/4" | 18-8 Stainless Steel | No | 4 | 5/32" | 7/8" | 11/16" | No. 8 | 00000000 | 0000 |
| B | 300 | 1 9/16" | 3 1/8" | 1/4" | Round | 1 9/16" | 1 5/16" | 18-8 Stainless Steel | No | 4 | 5/32" | 1" | 3/4" | No. 8 | 00000000 | 0000 |
| B | 480 | 1 15/16" | 3 3/4" | 5/16" | Round | 1 15/16" | 1 9/16" | 18-8 Stainless Steel | No | 4 | 3/16" | 1 3/8" | 1" | No. 8 | 00000000 | 00000 |
Snap-In Load-Securing Plates
Also known as E-track, use these plates for a tie-down system in places where full lengths of track won't fit.
Snap straps, anchor points, and other accessories into Style A, B, and C plates.
Zinc-plated steel plates have mild corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| Style | Capacity, lbs. | Lg. | Wd. | Each | |
Zinc-Plated Low-Carbon Steel | |||||
|---|---|---|---|---|---|
| B | 1,000 | 1" | 4 1/2" | 00000000 | 00000 |
Swiveling Extension Spring Stud Anchors
A black-oxide finish provides these steel anchors with mild corrosion resistance. The head swivels 360° so the spring stays straight and properly coiled. Attach an extension spring to a stud and then thread the stud into your part for a secure connection. To make tightening easier, anchors have a hex socket on the bottom and wrench flats at the top of the threads.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||
|---|---|---|---|---|---|---|---|---|
Size | Min. Lg. | Lg. | Dia. | Hole Dia. | Hex Size | Material | Each | |
| 6-32 | 3/8" | 5/8" | 0.138" | 0.08" | 0.035" | Black-Oxide Steel | 000000000 | 000000 |
| 6-40 | 5/8" | 5/8" | 1/8" | 0.08" | 0.035" | Black-Oxide Steel | 000000000 | 00000 |
| 8-32 | 5/8" | 7/8" | 0.164" | 0.1" | 0.05" | Black-Oxide Steel | 000000000 | 00000 |
| 8-36 | 5/8" | 7/8" | 1/8" | 0.1" | 0.05" | Black-Oxide Steel | 000000000 | 00000 |
| 10-24 | 3/4" | 1 1/8" | 1/4" | 0.12" | 0.05" | Black-Oxide Steel | 000000000 | 00000 |
| 10-32 | 3/4" | 1 1/8" | 1/4" | 0.12" | 1/16" | Black-Oxide Steel | 000000000 | 00000 |
| 1/4"-20 | 7/8" | 1 1/4" | 1/4" | 0.15" | 5/64" | Black-Oxide Steel | 000000000 | 00000 |
| 1/4"-28 | 7/8" | 1 1/4" | 1/4" | 0.15" | 5/64" | Black-Oxide Steel | 000000000 | 00000 |
| 3/8"-16 | 1 1/8" | 1 5/8" | 3/8" | 0.22" | 1/8" | Black-Oxide Steel | 000000000 | 00000 |
| 3/8"-24 | 1 1/8" | 1 5/8" | 3/8" | 0.22" | 1/8" | Black-Oxide Steel | 000000000 | 00000 |
Thread | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Min. Lg., mm | Lg., mm | Dia., mm | Hole Dia., mm | Hex Size, mm | Material | Each | |
| M3.5 | 0.6 | 10 | 16 | 3.5 | 2 | 0.9 | Black-Oxide Steel | 000000000 | 000000 |
| M4 | 0.7 | 16 | 22 | 4 | 2.5 | 1.3 | Black-Oxide Steel | 000000000 | 00000 |
| M5 | 0.8 | 19 | 28 | 5 | 3 | 1.5 | Black-Oxide Steel | 000000000 | 00000 |
| M6 | 1 | 22 | 32 | 6 | 4 | 2 | Black-Oxide Steel | 000000000 | 00000 |
| M8 | 1.25 | 25 | 38 | 8 | 5 | 2.5 | Black-Oxide Steel | 000000000 | 00000 |
| M10 | 1.5 | 28 | 41 | 10 | 6 | 3 | Black-Oxide Steel | 000000000 | 00000 |
Corrosion-Resistant Swiveling Extension Spring Stud Anchors
These stainless steel anchor studs offer excellent corrosion resistance. The head swivels 360° so the spring stays straight and properly coiled. Attach an extension spring to a stud and then thread the stud into your part for a secure connection. To make tightening easier, anchors have a hex socket on the bottom and wrench flats at the top of the threads.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Min. Lg. | Lg. | Dia. | Hole Dia. | Hex Size | Material | Each | |
| 6-32 | 3/8" | 5/8" | 0.138" | 0.08" | 0.035" | 18-8 Stainless Steel | 000000000 | 000000 |
| 6-40 | 5/8" | 5/8" | 1/8" | 0.08" | 0.035" | 18-8 Stainless Steel | 000000000 | 00000 |
| 8-32 | 5/8" | 7/8" | 0.164" | 0.1" | 0.05" | 18-8 Stainless Steel | 000000000 | 00000 |
| 8-36 | 5/8" | 7/8" | 1/8" | 0.1" | 0.05" | 18-8 Stainless Steel | 000000000 | 00000 |
| 10-24 | 3/4" | 1 1/8" | 1/4" | 0.12" | 0.05" | 18-8 Stainless Steel | 000000000 | 00000 |
| 10-32 | 3/4" | 1 1/8" | 1/4" | 0.12" | 1/16" | 18-8 Stainless Steel | 000000000 | 00000 |
| 1/4"-20 | 7/8" | 1 1/4" | 1/4" | 0.15" | 5/64" | 18-8 Stainless Steel | 000000000 | 00000 |
| 1/4"-28 | 7/8" | 1 1/4" | 1/4" | 0.15" | 5/64" | 18-8 Stainless Steel | 000000000 | 00000 |
| 3/8"-16 | 1 1/8" | 1 5/8" | 3/8" | 0.22" | 1/8" | 18-8 Stainless Steel | 000000000 | 00000 |
| 3/8"-24 | 1 1/8" | 1 5/8" | 3/8" | 0.22" | 1/8" | 18-8 Stainless Steel | 000000000 | 00000 |
Thread | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Min. Lg., mm | Lg., mm | Dia., mm | Hole Dia., mm | Hex Size, mm | Material | Each | |
| M3.5 | 0.6 | 10 | 16 | 3.5 | 2 | 0.9 | 18-8 Stainless Steel | 000000000 | 000000 |
| M4 | 0.7 | 16 | 22 | 4 | 2.5 | 1.3 | 18-8 Stainless Steel | 000000000 | 00000 |
| M5 | 0.8 | 19 | 28 | 5 | 3 | 1.5 | 18-8 Stainless Steel | 000000000 | 00000 |
| M6 | 1 | 22 | 32 | 6 | 4 | 2 | 18-8 Stainless Steel | 000000000 | 00000 |
| M8 | 1.25 | 25 | 38 | 8 | 5 | 2.5 | 18-8 Stainless Steel | 000000000 | 00000 |
| M10 | 1.5 | 28 | 41 | 10 | 6 | 3 | 18-8 Stainless Steel | 000000000 | 00000 |
Corrosion-Resistant Extension Spring Stud Anchors
These stainless steel anchor studs offer excellent corrosion resistance. Attach an extension spring to a stud and then thread the stud into your part for a secure connection.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||
|---|---|---|---|---|---|---|---|
| Size | Min. Lg. | Lg. | Dia. | Hole Dia. | Material | Each | |
| 6-32 | 3/8" | 5/8" | 0.138" | 0.08" | 18-8 Stainless Steel | 000000000 | 00000 |
| 6-40 | 5/8" | 5/8" | 0.138" | 0.08" | 18-8 Stainless Steel | 000000000 | 0000 |
| 8-32 | 5/8" | 7/8" | 0.164" | 0.1" | 18-8 Stainless Steel | 000000000 | 0000 |
| 8-36 | 5/8" | 7/8" | 0.164" | 0.1" | 18-8 Stainless Steel | 000000000 | 0000 |
| 10-24 | 3/4" | 1 1/8" | 0.19" | 0.12" | 18-8 Stainless Steel | 000000000 | 0000 |
| 10-32 | 3/4" | 1 1/8" | 0.19" | 0.12" | 18-8 Stainless Steel | 000000000 | 0000 |
| 1/4"-20 | 7/8" | 1 1/4" | 1/4" | 0.15" | 18-8 Stainless Steel | 000000000 | 0000 |
| 1/4"-20 | 7/8" | 1 1/4" | 1/4" | 0.268" | 18-8 Stainless Steel | 000000000 | 00000 |
| 1/4"-28 | 7/8" | 1 1/4" | 1/4" | 0.15" | 18-8 Stainless Steel | 000000000 | 0000 |
| 3/8"-16 | 1 1/8" | 1 5/8" | 3/8" | 0.22" | 18-8 Stainless Steel | 000000000 | 0000 |
| 3/8"-16 | 1 1/8" | 1 5/8" | 3/8" | 0.268" | 18-8 Stainless Steel | 000000000 | 00000 |
| 3/8"-24 | 1 1/8" | 1 5/8" | 3/8" | 0.22" | 18-8 Stainless Steel | 000000000 | 0000 |
Thread | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Min. Lg., mm | Lg., mm | Dia., mm | Hole Dia., mm | Material | Anchor Type | Each | |
| M3.5 | 0.6 | 10 | 16 | 3.5 | 2 | 18-8 Stainless Steel | Stud | 000000000 | 00000 |
| M4 | 0.7 | 16 | 22 | 4 | 2.5 | 18-8 Stainless Steel | Stud | 000000000 | 0000 |
| M5 | 0.8 | 19 | 28 | 5 | 3 | 18-8 Stainless Steel | Stud | 000000000 | 0000 |
| M6 | 1 | 22 | 32 | 6 | 4 | 18-8 Stainless Steel | Stud | 000000000 | 0000 |
| M8 | 1.25 | 25 | 38 | 8 | 5 | 18-8 Stainless Steel | Stud | 000000000 | 00000 |
| M10 | 1.5 | 28 | 41 | 10 | 6 | 18-8 Stainless Steel | Stud | 000000000 | 00000 |
Extension Spring Stud Anchors
A black-oxide finish provides these steel anchors with mild corrosion resistance. Attach an extension spring to a stud and then thread the stud into your part for a secure connection.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||
|---|---|---|---|---|---|---|---|
| Size | Min. Lg. | Lg. | Dia. | Hole Dia. | Material | Each | |
| 6-32 | 3/8" | 5/8" | 0.138" | 0.08" | Black-Oxide Steel | 0000000 | 00000 |
| 6-40 | 5/8" | 5/8" | 0.138" | 0.08" | Black-Oxide Steel | 0000000 | 0000 |
| 8-32 | 5/8" | 7/8" | 0.164" | 0.1" | Black-Oxide Steel | 0000000 | 0000 |
| 8-36 | 5/8" | 7/8" | 0.164" | 0.1" | Black-Oxide Steel | 0000000 | 0000 |
| 10-24 | 3/4" | 1 1/8" | 0.19" | 0.12" | Black-Oxide Steel | 0000000 | 0000 |
| 10-32 | 3/4" | 1 1/8" | 0.19" | 0.12" | Black-Oxide Steel | 0000000 | 0000 |
| 1/4"-20 | 7/8" | 1 1/4" | 1/4" | 0.15" | Black-Oxide Steel | 0000000 | 0000 |
| 1/4"-20 | 7/8" | 1 1/4" | 1/4" | 0.268" | Black-Oxide Steel | 0000000 | 0000 |
| 1/4"-28 | 7/8" | 1 1/4" | 1/4" | 0.15" | Black-Oxide Steel | 0000000 | 0000 |
| 3/8"-16 | 1 1/8" | 1 5/8" | 3/8" | 0.22" | Black-Oxide Steel | 0000000 | 0000 |
| 3/8"-16 | 1 1/8" | 1 5/8" | 3/8" | 0.268" | Black-Oxide Steel | 0000000 | 0000 |
| 3/8"-24 | 1 1/8" | 1 5/8" | 3/8" | 0.22" | Black-Oxide Steel | 0000000 | 0000 |
Thread | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Min. Lg., mm | Lg., mm | Dia., mm | Hole Dia., mm | Material | Each | |
| M3.5 | 0.6 | 10 | 16 | 3.5 | 2 | Black-Oxide Steel | 0000000 | 00000 |
| M4 | 0.7 | 16 | 22 | 4 | 2.5 | Black-Oxide Steel | 0000000 | 0000 |
| M5 | 0.8 | 19 | 28 | 5 | 3 | Black-Oxide Steel | 0000000 | 0000 |
| M6 | 1 | 22 | 32 | 6 | 4 | Black-Oxide Steel | 0000000 | 0000 |
| M8 | 1.25 | 25 | 38 | 8 | 5 | Black-Oxide Steel | 0000000 | 0000 |
| M10 | 1.5 | 28 | 41 | 10 | 6 | Black-Oxide Steel | 0000000 | 0000 |
Hex Head Removable-Bolt Anchors for Block and Brick
A hex head allows for a secure grip with a wrench. Also known as sleeve anchors, these have a sleeve that expands for a secure hold in block and brick. They're often used to hold steel and wood panels, doors, framing, and shelving. To install, tap the anchor into a hole and tighten the bolt to expand the sleeve. As you tighten, the nylon ring compresses to secure the fixture against the base material. Made from 18-8 stainless steel, they're chemical resistant and may be mildly magnetic. Pull-out strength and shear strength values are 25% of the ultimate values.
For technical drawings and 3-D models, click on a part number.
Thread | Strength, lbs. | Each | Package | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Size | Lg. | Head Wd. | Washer OD | Drill Bit Size | Min. Installation Dp. | Pull-Out | Shear | Tested In | Required Installation Torque, ft.-lbs. | Drive Style | For Use In | Each | Pkg. Qty. | Pkg. | ||
18-8 Stainless Steel | |||||||||||||||||
1/4" Dia. | |||||||||||||||||
| 1 3/4" | 10-24 | 3/4" | 5/16" | 0.5" | 1/4" | 1 1/4" | 370 | 520 | 4,000 psi Concrete | 3 | External Hex | Block, Brick, Concrete | 000000000 | 00000 | 4 | 000000000 | 000000 |
| 3" | 10-24 | 3/4" | 5/16" | 0.5" | 1/4" | 1 1/4" | 370 | 520 | 4,000 psi Concrete | 3 | External Hex | Block, Brick, Concrete | 000000000 | 0000 | 4 | 000000000 | 00000 |
3/8" Dia. | |||||||||||||||||
| 2 1/4" | 5/16"-18 | 7/8" | 1/2" | 0.813" | 3/8" | 2" | 1,100 | 1,600 | 4,000 psi Concrete | 12 | External Hex | Block, Brick, Concrete | 000000000 | 0000 | 4 | 000000000 | 00000 |
| 3 1/2" | 5/16"-18 | 7/8" | 1/2" | 0.813" | 3/8" | 2" | 1,100 | 1,600 | 4,000 psi Concrete | 12 | External Hex | Block, Brick, Concrete | 000000000 | 0000 | 4 | 000000000 | 00000 |
| 4" | 5/16"-18 | 7/8" | 1/2" | 0.813" | 3/8" | 2" | 1,100 | 1,600 | 4,000 psi Concrete | 12 | External Hex | Block, Brick, Concrete | 000000000 | 00000 | 4 | 000000000 | 00000 |
1/2" Dia. | |||||||||||||||||
| 2 3/4" | 3/8"-16 | 1" | 9/16" | 1" | 1/2" | 2 1/2" | 1,600 | 2,000 | 4,000 psi Concrete | 25 | External Hex | Block, Brick, Concrete | 000000000 | 00000 | 4 | 000000000 | 00000 |
| 4 3/4" | 3/8"-16 | 1" | 9/16" | 1" | 1/2" | 2 1/2" | 1,600 | 2,000 | 4,000 psi Concrete | 25 | External Hex | Block, Brick, Concrete | 000000000 | 00000 | 4 | 000000000 | 00000 |