Search Results
Close
About Character Height
When you look at the face of a stamp, you'll notice the character is raised. The distance between the upper and lower raised ridges is known as the character height. This height is used to measure stamp size. If a stamp does not have a size marking on the shank, measure the character height to order the correct size.
The actual impression a stamp makes is larger than its character height and varies depending upon how hard you strike the stamp, the hardness of the material, and wear.
Inspection Symbol Metal Stamps
Mark surfaces with unique characters for traceability, quality control, and inspection. For use on materials with a Rockwell hardness up to C30, including leather, wood, and most metals.
Also Available: Other symbols and sizes. Please ask for 1574T999 and specify symbol and character height.
A1
A1
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
A2
A2
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
A3
A3
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
A4
A4
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
A5
A5
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
B1
B1
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
B2
B2
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
B3
B3
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
B4
B4
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
B5
B5
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
C1
C1
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
C2
C2
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
C3
C3
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
C4
C4
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
C5
C5
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
D1
D1
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
D2
D2
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
D3
D3
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
D4
D4
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
D5
D5
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
E1
E1
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
E2
E2
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
E3
E3
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
E4
E4
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
E5
E5
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
F1
F1
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
F2
F2
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
F3
F3
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
F4
F4
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
F5
F5
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
G1
G1
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
G2
G2
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
G3
G3
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
G4
G4
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
G5
G5
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
H1
H1
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
H2
H2
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
H3
H3
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
H4
H4
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
H5
H5
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
I1
I1
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
I2
I2
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
I3
I3
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
I4
I4
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
I5
I5
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
J1
J1
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 0000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
J2
J2
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
J3
J3
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
J4
J4
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
J5
J5
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
K1
K1
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
K2
K2
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
K3
K3
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
K4
K4
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
K5
K5
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
L1
L1
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
L2
L2
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
L3
L3
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
L4
L4
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
L5
L5
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
M1
M1
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
M2
M2
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
M3
M3
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
M4
M4
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
M5
M5
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
N1
N1
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
N2
N2
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
N3
N3
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
N4
N4
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
N5
N5
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | For Max. Surface Hardness | Stamp Material | Each | |
| 1/8" | 2 1/2" | 5/16" | 5/16" | Rockwell C30 | Steel | 00000000 | 000000 |
| 3/16" | 2 7/8" | 3/8" | 3/8" | Rockwell C30 | Steel | 00000000 | 00000 |
| 1/4" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 5/16" | 3" | 1/2" | 1/2" | Rockwell C30 | Steel | 00000000 | 00000 |
| 3/8" | 3" | 5/8" | 5/8" | Rockwell C30 | Steel | 00000000 | 00000 |
Metal Stamps with Made-to-Order Message
1-Line Stamp
2-Line Stamp
Specify the message or logo you need. Spaces do not count toward the number of characters per line.
| Max. No. of Characters per Line | Shank Lg. | For Max. Surface Hardness | Stamp Material | Letter Casing | Each | |
1-Line Stamps | ||||||
|---|---|---|---|---|---|---|
1/16" Character Ht. | ||||||
| 2 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 000000 |
| 3 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 4 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 5 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 6 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 7 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
3/32" Character Ht. | ||||||
| 2 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 3 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 4 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 5 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 6 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 7 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
1/8" Character Ht. | ||||||
| 2 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 3 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 4 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 5 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 6 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 7 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
5/32" Character Ht. | ||||||
| 2 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 3 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 4 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 5 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 6 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 7 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
3/16" Character Ht. | ||||||
| 2 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 3 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 4 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 5 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 6 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 7 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 000000 |
1/4" Character Ht. | ||||||
| 2 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 3 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 4 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 5 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 6 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 000000 |
| 7 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 000000 |
2-Line Stamps | ||||||
1/16" Character Ht. | ||||||
| 2 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 3 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
3/32" Character Ht. | ||||||
| 2 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 3 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
1/8" Character Ht. | ||||||
| 2 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 3 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
5/32" Character Ht. | ||||||
| 2 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 3 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
3/16" Character Ht. | ||||||
| 2 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
| 3 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 00000 |
1/4" Character Ht. | ||||||
| 2 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 000000 |
| 3 | 3 1/2" | Rockwell C30 | Steel | Uppercase | 0000000 | 000000 |
Inspection Rubber Stamps
Mark inspected items with a number or message. These pocket-size stamps make 1,000 imprints before needing more ink. Use on nonporous surfaces such as plastic, glass, and metal.
