T-Slotted Framing Structural Brackets
Connect T-slotted rails and reinforce joints for structural stability. Fasteners are included.
With ends mitered at a 45° angle, attach diagonal braces inside corners to create sturdier 90° connections than other brackets to reinforce your structures.
Silver | Black | |||||||
|---|---|---|---|---|---|---|---|---|
| For Rail Ht. | Lg. | Material | Rail Machining | Mounting Fasteners Included | Each | Each | ||
| 1" | 6" | Anodized 6105 Aluminum | Not Required | Yes | 000000000 | 000000 | 000000000 | 000000 |
| 1" | 12" | Anodized 6105 Aluminum | Not Required | Yes | 000000000 | 00000 | 000000000 | 00000 |
| 1" | 18" | Anodized 6105 Aluminum | Not Required | Yes | 000000000 | 00000 | 000000000 | 00000 |
| 1" | 24" | Anodized 6105 Aluminum | Not Required | Yes | 000000000 | 00000 | 000000000 | 00000 |
| 1 1/2" | 6" | Anodized 6105 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000000 | 00000 |
| 1 1/2" | 12" | Anodized 6105 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000000 | 00000 |
| 1 1/2" | 18" | Anodized 6105 Aluminum | Not Required | Yes | 000000000 | 00000 | 000000000 | 00000 |
| 1 1/2" | 24" | Anodized 6105 Aluminum | Not Required | Yes | 000000000 | 00000 | 000000000 | 00000 |
| 20mm | 6" | Anodized 6560 Aluminum | Not Required | Yes | 000000 | 00000 | 000000 | 00 |
| 20mm | 12" | Anodized 6560 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 20mm | 18" | Anodized 6560 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 20mm | 24" | Anodized 6560 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 25mm | 6" | Anodized 6005 Aluminum | Not Required | Yes | 0000000 | 00000 | 000000 | 00 |
| 25mm | 12" | Anodized 6005 Aluminum | Not Required | Yes | 0000000 | 00000 | 000000 | 00 |
| 25mm | 18" | Anodized 6005 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 30mm | 6" | Anodized 6560 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 30mm | 12" | Anodized 6560 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 30mm | 18" | Anodized 6560 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 30mm | 24" | Anodized 6560 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 40mm | 6" | Anodized 6560 Aluminum | Not Required | Yes | 00000000 | 00000 | 0000000 | 00000 |
| 40mm | 12" | Anodized 6560 Aluminum | Not Required | Yes | 0000000 | 00000 | 0000000 | 00000 |
| 40mm | 18" | Anodized 6560 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 40mm | 24" | Anodized 6560 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 45mm | 6" | Anodized 6560 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 45mm | 12" | Anodized 6560 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 45mm | 18" | Anodized 6560 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 45mm | 24" | Anodized 6560 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
Use diagonal brace ends to make a brace of any length—a connecting rail (sold separately) between the brace ends is required. To install, use a tap (sold separately) to create a threaded hole, then fasten the brace end to a connecting rail using the included hardware. Brace ends with no required tap thread size include thread-forming screws.
| For Rail Ht. | Lg. | Color | Material | Required Tap Thread Size  | Rail Machining | Mounting Fasteners Included | Pkg. Qty. | Pkg. | |
| 1" | 1 7/32" | Silver | 6063 Aluminum | M6 | Required | Yes | 2 | 000000000 | 000000 |
| 1" | 1 7/32" | Black | Powder-Coated 6063 Aluminum | M6 | Required | Yes | 2 | 0000000 | 00000 |
| 1 1/2" | 1 27/32" | Silver | 6063 Aluminum | M8 | Required | Yes | 2 | 000000000 | 00000 |
| 1 1/2" | 1 27/32" | Black | Powder-Coated 6063 Aluminum | M8 | Required | Yes | 2 | 0000000 | 00000 |
| 20mm | 15/16" | Silver | 6063 Aluminum | M5 | Required | Yes | 2 | 00000000 | 00000 |
| 30mm | 1 1/2" | Silver | 6063 Aluminum | M8 | Required | Yes | 2 | 00000000 | 00000 |
| 40mm | 2 1/16" | Silver | Zinc | M8 | Required | Yes | 2 | 00000000 | 00000 |
| 45mm | 2 1/8" | Silver | 6063 Aluminum | __ | Not Required | Yes | 2 | 00000000 | 00000 |
Mount two brace rails at a single point on your primary rail.
Use diagonal brace ends to make a brace of any length—a connecting rail (sold separately) between the brace ends is required. To install, use a tap (sold separately) to create a threaded hole, then fasten the brace end to a connecting rail using the included hardware.
| For Rail Ht. | Lg. | Color | Material | Required Tap Thread Size | Rail Machining | Mounting Fasteners Included | Each | |
| 1 1/2", 40mm | 1 37/64" | Silver | 6063 Aluminum | M8 | Required | Yes | 0000000 | 000000 |
Mount a brace rail in the corner of a 90° rail assembly to reinforce the corner connection as well as the overall structure.
Use diagonal brace ends to make a brace of any length—a connecting rail (sold separately) between the brace ends is required. To install, use a tap (sold separately) to create a threaded hole, then fasten the brace end to a connecting rail using the included hardware.
| For Rail Ht. | Lg. | Color | Material | Required Tap Thread Size | Rail Machining | Mounting Fasteners Included | Each | |
| 1 1/2", 40mm | 1 37/64" | Silver | 6063 Aluminum | M8 | Required | Yes | 0000000 | 000000 |
Diagonal brace ends for single and double rails allow connections from a double rail to either a single rail or a double rail. A connecting rail (sold separately) between the brace ends is required. To install, use a tap (sold separately) to create a threaded hole, then fasten the brace end to a connecting rail using the included hardware.
For Rail Ht. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Single | Double | Lg. | Color | Material | Required Tap Thread Size | Rail Machining | Mounting Fasteners Included | Each | |
| 1 1/2", 40mm | 3", 80mm | 3 5/32" | Silver | Powder-Coated Aluminum | M8 | Required | Yes | 0000000 | 000000 |
With ends mitered at a 45° angle, attach diagonal braces inside corners to create sturdier 90° connections than other brackets to reinforce your structures.
Silver | Black | |||||||
|---|---|---|---|---|---|---|---|---|
| For Rail Ht. | Lg. | Material | Rail Machining | Mounting Fasteners Included | Each | Each | ||
| 2" | 6" | Anodized 6105 Aluminum | Not Required | Yes | 000000000 | 000000 | 000000000 | 000000 |
| 2" | 12" | Anodized 6105 Aluminum | Not Required | Yes | 000000000 | 00000 | 000000000 | 00000 |
| 2" | 18" | Anodized 6105 Aluminum | Not Required | Yes | 000000000 | 00000 | 000000000 | 00000 |
| 2" | 24" | Anodized 6105 Aluminum | Not Required | Yes | 000000000 | 00000 | 000000000 | 00000 |
| 3" | 6" | Anodized 6105 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 3" | 12" | Anodized 6005 Aluminum | Not Required | Yes | 000000 | 00 | 0000000 | 00000 |
| 3" | 12" | Anodized 6105 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 3" | 18" | Anodized 6105 Aluminum | Not Required | Yes | 000000000 | 00000 | 000000 | 00 |
| 3" | 24" | Anodized 6105 Aluminum | Not Required | Yes | 000000000 | 00000 | 000000 | 00 |
| 40mm | 6" | Anodized 6560 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 40mm | 12" | Anodized 6560 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 40mm | 18" | Anodized 6560 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 40mm | 24" | Anodized 6560 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 50mm | 6" | Anodized 6005 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 50mm | 12" | Anodized 6005 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 50mm | 18" | Anodized 6005 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 60mm | 6" | Anodized 6560 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 60mm | 12" | Anodized 6560 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 60mm | 18" | Anodized 6560 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 60mm | 24" | Anodized 6560 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 80mm | 6" | Anodized 6560 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 80mm | 12" | Anodized 6560 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 80mm | 18" | Anodized 6560 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 80mm | 24" | Anodized 6560 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 90mm | 6" | Anodized 6560 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 90mm | 12" | Anodized 6560 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 90mm | 18" | Anodized 6560 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
| 90mm | 24" | Anodized 6560 Aluminum | Not Required | Yes | 00000000 | 00000 | 000000 | 00 |
Use diagonal brace ends to make a brace of any length—a connecting rail (sold separately) between the brace ends is required. To install, use a tap (sold separately) to create a threaded hole, then fasten the brace end to a connecting rail using the included hardware. Brace ends with no required tap thread size include thread-forming screws.
| For Rail Ht. | Lg. | Color | Material | Required Tap Thread Size | Rail Machining | Mounting Fasteners Included | Pkg. Qty. | Pkg. | |
| 2" | 1 1/4" | Silver | 6063 Aluminum | M6 | Required | Yes | 2 | 000000000 | 000000 |
| 3" | 1 27/32" | Silver | 6063 Aluminum | M8 | Required | Yes | 2 | 000000000 | 00000 |
| 40mm | 15/16" | Silver | 6063 Aluminum | M5 | Required | Yes | 2 | 00000000 | 00000 |
| 60mm | 1 1/2" | Silver | 6063 Aluminum | M8 | Required | Yes | 2 | 00000000 | 00000 |
| 80mm | 2" | Silver | 6063 Aluminum | M8 | Required | Yes | 2 | 00000000 | 00000 |
| 90mm | 2 1/8" | Silver | 6063 Aluminum | __ | Not Required | Yes | 2 | 00000000 | 00000 |
With ends mitered at a 45° angle, attach diagonal braces inside corners to create sturdier 90° connections than other brackets to reinforce your structures.