Filter by
Temper Designation
System of Measurement
Inside Width
Inside Height
Material
Appearance
Yield Strength
Leg Edge Shape
Tolerance Rating
Hardness Rating
Hardness
Export Control Classification Number (ECCN)
Heat Treatment
Maximum Temperature
DFARS Specialty Metals
RoHS
About Aluminum
Compare over 20 aluminum alloys to find the right material for you—all with material certificates for traceability.
Architectural 6063 Aluminum U-Channels
- Yield Strength: 16,000 psi
- Hardness: Brinell 55 (Soft)
- Temper: See table
- Fabrication: Extruded
- Specifications Met: ASTM B221
More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Outside | Inside | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Wd. | Temper | Heat Treatment | Temperature Range, °F | 4 ft. Lg. | 8 ft. Lg. | |
1/8" Wall Thick. | |||||||||
| 1/2" | 1 1/4" | 0.38" | 1.00" | T52 | Hardened | -320° to 212° | 00000000 | ||
| 1/2" | 3" | 0.38" | 2.75" | T52 | Hardened | -320° to 212° | 00000000 | ||
| 5/8" | 5/8" | 0.50" | 0.38" | T52 | Hardened | -320° to 212° | 00000000 | ||
| 3/4" | 1 1/4" | 0.63" | 1.00" | T52 | Hardened | -320° to 212° | 00000000 | ||
| 7/8" | 2 1/4" | 0.75" | 2.00" | T52 | Hardened | -320° to 212° | 00000000 | ||
| 1 1/2" | 3/4" | 1.38" | 0.50" | T52 | Hardened | -320° to 212° | 00000000 | ||
3/16" Wall Thick. | |||||||||
| 1 1/2" | 3" | 1.31" | 2.63" | T52 | Hardened | -320° to 212° | 00000000 | ||
1/4" Wall Thick. | |||||||||
| 1 1/2" | 1 1/2" | 1.25" | 1.00" | T52 | Hardened | -320° to 212° | 00000000 | ||
Architectural 6063 Aluminum 90° Angles
More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
With Square Inside Corner
Square Inside Corner
- Yield Strength: 16,000 psi
- Hardness: Brinell 55 (Soft)
- Temper: See table
- Fabrication: Extruded
- Specifications Met: ASTM B221
Outside | Inside | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | Temper | Heat Treatment | Temperature Range, °F | Straightness Tolerance | Each | |
1 ft. | |||||||||||
1/16" Wall Thick. | |||||||||||
| 1" | -0.014" to 0.014" | 1" | -0.014" to 0.014" | 0.94" | 0.94" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 000000000 | 00000 |
1/8" Wall Thick. | |||||||||||
| 1" | -0.014" to 0.014" | 1" | -0.014" to 0.014" | 0.88" | 0.88" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 000000000 | 0000 |
| 1 1/2" | -0.014" to 0.014" | 2" | -0.034" to 0.034" | 1.38" | 1.88" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 000000000 | 0000 |
| 2" | -0.034" to 0.034" | 3" | -0.034" to 0.034" | 1.88" | 2.88" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 000000000 | 00000 |
| 2" | -0.034" to 0.034" | 4" | -0.034" to 0.034" | 1.88" | 3.88" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 000000000 | 00000 |
| 2 1/2" | -0.034" to 0.034" | 2 1/2" | -0.034" to 0.034" | 2.38" | 2.38" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 000000000 | 00000 |
| 3" | -0.034" to 0.034" | 3" | -0.034" to 0.034" | 2.88" | 2.88" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 000000000 | 00000 |
| 4" | -0.034" to 0.034" | 4" | -0.034" to 0.034" | 3.88" | 3.88" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 000000000 | 00000 |
3/16" Wall Thick. | |||||||||||
| 3" | -0.034" to 0.034" | 3" | -0.034" to 0.034" | 2.81" | 2.81" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 000000000 | 00000 |
1/4" Wall Thick. | |||||||||||
| 2 1/2" | -0.034" to 0.034" | 2 1/2" | -0.034" to 0.034" | 2.25" | 2.25" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 000000000 | 00000 |
| 3" | -0.034" to 0.034" | 3" | -0.034" to 0.034" | 2.75" | 2.75" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 000000000 | 00000 |
2 ft. | |||||||||||
1/8" Wall Thick. | |||||||||||
| 1" | -0.014" to 0.014" | 1" | -0.014" to 0.014" | 0.88" | 0.88" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 000000000 | 00000 |
| 2" | -0.034" to 0.034" | 3" | -0.034" to 0.034" | 1.88" | 2.88" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 000000000 | 00000 |
| 2" | -0.034" to 0.034" | 4" | -0.034" to 0.034" | 1.88" | 3.88" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 000000000 | 00000 |
| 2 1/2" | -0.034" to 0.034" | 2 1/2" | -0.034" to 0.034" | 2.38" | 2.38" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 000000000 | 00000 |
| 3" | -0.034" to 0.034" | 3" | -0.034" to 0.034" | 2.88" | 2.88" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 000000000 | 00000 |
| 3" | -0.034" to 0.034" | 4" | -0.034" to 0.034" | 2.88" | 3.88" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 000000000 | 00000 |
| 4" | -0.034" to 0.034" | 4" | -0.034" to 0.034" | 3.88" | 3.88" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 000000000 | 00000 |
3/16" Wall Thick. | |||||||||||
| 3" | -0.034" to 0.034" | 3" | -0.034" to 0.034" | 2.81" | 2.81" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 000000000 | 00000 |
1/4" Wall Thick. | |||||||||||
| 2 1/2" | -0.034" to 0.034" | 2 1/2" | -0.034" to 0.034" | 2.25" | 2.25" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 000000000 | 00000 |
| 3" | -0.034" to 0.034" | 3" | -0.034" to 0.034" | 2.75" | 2.75" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 000000000 | 00000 |
4 ft. | |||||||||||
1/16" Wall Thick. | |||||||||||
| 1 1/2" | -0.014" to 0.014" | 1 1/2" | -0.014" to 0.014" | 1.44" | 1.44" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 00000000 | 00000 |
1/8" Wall Thick. | |||||||||||
| 2" | -0.034" to 0.034" | 3" | -0.034" to 0.034" | 1.88" | 2.88" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 00000000 | 00000 |
| 2" | -0.034" to 0.034" | 4" | -0.034" to 0.034" | 1.88" | 3.88" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 00000000 | 00000 |
| 2 1/2" | -0.034" to 0.034" | 2 1/2" | -0.034" to 0.034" | 2.38" | 2.38" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 00000000 | 00000 |
| 3" | -0.034" to 0.034" | 3" | -0.034" to 0.034" | 2.88" | 2.88" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 00000000 | 00000 |
| 3" | -0.034" to 0.034" | 4" | -0.034" to 0.034" | 2.88" | 3.88" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 000000000 | 00000 |
| 4" | -0.034" to 0.034" | 4" | -0.034" to 0.034" | 3.88" | 3.88" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 00000000 | 00000 |
3/16" Wall Thick. | |||||||||||
| 3" | -0.034" to 0.034" | 3" | -0.034" to 0.034" | 2.81" | 2.81" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 00000000 | 00000 |
1/4" Wall Thick. | |||||||||||
| 2 1/2" | -0.034" to 0.034" | 2 1/2" | -0.034" to 0.034" | 2.25" | 2.25" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 000000000 | 00000 |
| 3" | -0.034" to 0.034" | 3" | -0.034" to 0.034" | 2.75" | 2.75" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 00000000 | 00000 |
8 ft. | |||||||||||
1/16" Wall Thick. | |||||||||||
| 1 1/2" | -0.014" to 0.014" | 1 1/2" | -0.014" to 0.014" | 1.44" | 1.44" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 00000000 | 00000 |
1/8" Wall Thick. | |||||||||||
| 2" | -0.034" to 0.034" | 3" | -0.034" to 0.034" | 1.88" | 2.88" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 00000000 | 00000 |
| 2" | -0.034" to 0.034" | 4" | -0.034" to 0.034" | 1.88" | 3.88" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 00000000 | 00000 |
| 2 1/2" | -0.034" to 0.034" | 2 1/2" | -0.034" to 0.034" | 2.38" | 2.38" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 00000000 | 00000 |
| 3" | -0.034" to 0.034" | 3" | -0.034" to 0.034" | 2.88" | 2.88" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 00000000 | 00000 |
| 3" | -0.034" to 0.034" | 4" | -0.034" to 0.034" | 2.88" | 3.88" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 000000000 | 000000 |
| 4" | -0.034" to 0.034" | 4" | -0.034" to 0.034" | 3.88" | 3.88" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 00000000 | 00000 |
3/16" Wall Thick. | |||||||||||
| 3" | -0.034" to 0.034" | 3" | -0.034" to 0.034" | 2.81" | 2.81" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 00000000 | 000000 |
1/4" Wall Thick. | |||||||||||
| 2 1/2" | -0.034" to 0.034" | 2 1/2" | -0.034" to 0.034" | 2.25" | 2.25" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 000000000 | 000000 |
| 3" | -0.034" to 0.034" | 3" | -0.034" to 0.034" | 2.75" | 2.75" | T52 | Hardened | -320° to 212° | 0.013" per ft. | 00000000 | 000000 |
Architectural 6063 Aluminum Rectangular Tubes
- Yield Strength: 16,000 psi
- Hardness: Brinell 60 (Soft)
- Temper Rating: See table
- Fabrication: Extruded
- Specifications Met: ASTM B221
More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Outside | Inside | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Wd. | Temper | Heat Treatment | Temperature Range, °F | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
1/16" Wall Thick. (-0.01" to 0.01" Tolerance) | ||||||||||
| 1/2" | 1/2" | 3/8" | 3/8" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 1/2" | 1" | 3/8" | 7/8" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 3/4" | 3/4" | 5/8" | 5/8" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 1" | 1" | 7/8" | 7/8" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 1" | 1 1/2" | 7/8" | 1 3/8" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 1" | 2" | 7/8" | 1 7/8" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 1 1/4" | 1 1/4" | 1 1/8" | 1 1/8" | T52 | Hardened | -320° to 212° | 00000000 | |||
1/8" Wall Thick. (-0.015" to 0.015" Tolerance) | ||||||||||
| 3/4" | 3/4" | 1/2" | 1/2" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 3/4" | 1 1/2" | 1/2" | 1 1/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 1" | 1" | 3/4" | 3/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 1" | 1 1/2" | 3/4" | 1 1/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 1" | 2" | 3/4" | 1 3/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 1" | 3" | 3/4" | 2 3/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 1" | 4" | 3/4" | 3 3/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 1" | 6" | 3/4" | 5 3/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 1 1/4" | 1 1/4" | 1" | 1" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 1 1/4" | 2 1/2" | 1" | 2 1/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 1 1/2" | 1 1/2" | 1 1/4" | 1 1/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 1 1/2" | 2" | 1 1/4" | 1 3/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 1 1/2" | 3" | 1 1/4" | 2 3/4" | T52 | Hardened | -320° to 212° | 000000000 | |||
| 1 3/4" | 1 3/4" | 1 1/2" | 1 1/2" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 1 3/4" | 3" | 1 1/2" | 2 3/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 1 3/4" | 4" | 1 1/2" | 3 3/4" | T52 | Hardened | -320° to 212° | 000000000 | |||
| 2" | 2" | 1 3/4" | 1 3/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 2" | 3" | 1 3/4" | 2 3/4" | T52 | Hardened | -320° to 212° | 000000000 | |||
| 2" | 4" | 1 3/4" | 3 3/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 2" | 5" | 1 3/4" | 4 3/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 2" | 6" | 1 3/4" | 5 3/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 2 1/2" | 2 1/2" | 2 1/4" | 2 1/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 3" | 3" | 2 3/4" | 2 3/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 4" | 4" | 3 3/4" | 3 3/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 5" | 5" | 4 3/4" | 4 3/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 6" | 6" | 5 3/4" | 5 3/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
3/16" Wall Thick. (-0.015" to 0.015" Tolerance) | ||||||||||
| 4" | 4" | 3 5/8" | 3 5/8" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 4 1/2" | 4 1/2" | 4 1/8" | 4 1/8" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 5" | 5" | 4 5/8" | 4 5/8" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 6" | 6" | 5 5/8" | 5 5/8" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 8" | 8" | 7 5/8" | 7 5/8" | T52 | Hardened | -320° to 212° | 00000000 | |||
1/4" Wall Thick. (-0.025" to 0.025" Tolerance) | ||||||||||
| 2" | 2" | 1 1/2" | 1 1/2" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 3" | 3" | 2 1/2" | 2 1/2" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 4" | 4" | 3 1/2" | 3 1/2" | T52 | Hardened | -320° to 212° | 00000000 | |||
| 6" | 6" | 5 1/2" | 5 1/2" | T52 | Hardened | -320° to 212° | 00000000 | |||
Architectural 6063 Aluminum Rods
- Yield Strength:
1/8" to 5/8" dia.: 25,000 psi
All other sizes: 16,000 psi - Hardness: Brinell 60 (Soft)
- Temper:
1/8" to 5/8" dia.: T6
All other sizes: T52 - Fabrication:
1/8" to 5/8" dia.: Extruded
All other sizes: Hot Rolled - Specifications Met: ASTM B221
More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.