Use these mounts on heavy machines and equipment.

A hex nut at the base of the stud allows for easy height adjustment.

Meant for light duty applications, these mounts are not rated for capacity.

Made of 303 stainless steel, these mounts resist corrosion from water and most chemicals.

Often used on wobbly tables, these mounts automatically adjust up to 5/16" to compensate for uneven floors.

A shield on the stud prevents dirt accumulation on the threads and provides a finished appearance.

Nickel-plated steel has some corrosion resistance.

Made of zinc-plated steel, these metric leveling mounts are more corrosion resistant than nickel-plated steel leveling mounts.

An economical choice for applications in corrosive environments that don't require high load capacities, these mounts have a plastic base.

Made of 303 stainless steel, these metric mounts resist corrosion from water and most chemicals.

Made entirely of 316 stainless steel, these metric mounts have superior corrosion resistance.

Punch-out holes in the base let you bolt down these mounts to keep your equipment stationary.

Well-suited to damp environments, these mounts have a stainless steel stud and nut for corrosion resistance.

An offset mounting hole allows for installation without moving your machine.

Nickel-plated steel has some corrosion resistance.

An economical choice for applications in corrosive environments that don't require high load capacities, these mounts have a plastic base.

Made of 303 stainless steel, these metric mounts resist corrosion from water and most chemicals.

Punch-out holes in the base let you bolt down these mounts to keep your equipment stationary.

Rated for high load capacity, use these inserts to connect threaded leveling mounts to heavy equipment.

Slip these inserts into tubular legs to quickly add threads for attaching leveling mounts. They’re often used in the legs of light equipment and furniture.

All-stainless steel construction stands up to water and chemicals and won't rust or corrode.

Higher deflection ratings translate to greater vibration and shock isolation.

A two-piece design requires less clearance than one-piece mounts and simplifies installation—raise your machine just enough to slide the base underneath, then insert the stud from above.

Higher deflection ratings translate to greater vibration and shock isolation.

Higher deflection ratings translate to greater vibration and shock isolation than our other vibration-damping leveling mounts.

A two-piece design simplifies installation and requires less clearance than one-piece mounts.

Use these feet on furniture with wood legs.

An integral cushion reduces noise and vibration.

Great for use outdoors, these feet are EPDM rubber, which withstands exposure to direct sunlight.

These feet are made of UHMW polyethylene plastic, so they won’t dry out and become brittle.

Peel back the film to stick these feet to the bottom of furniture and equipment legs.

A swiveling base compensates for angled legs and uneven surfaces.

These feet have angled or rounded bottoms to work with tubular furniture legs that meet the floor at an angle.

A two-piece design makes these mounts easier to install than one-piece mounts.

An interlocking steel frame in these mounts prevents collapse, even if the rubber fails.

Specifically designed for light vertical loads, these mounts buckle to protect lightweight equipment such as small fans and pumps from vibration.

Well-suited to moist environments, these mounts have a stainless steel plate for excellent corrosion resistance.

Limit damage during moderate earthquakes.

An interlocking steel frame in these mounts prevents collapse, even if the rubber fails.

Install these bumpers with screws. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces.

All of these bumpers are reinforced with an embedded washer or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Install them with screws.

With a textured surface, these nonslip bumpers protect equipment while minimizing the movement of objects that come in contact, making them good for positioning applications. Install them with adhesives or screws.

Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist these bumpers into a threaded hole.

All of these bumpers are reinforced with a steel core for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Twist them into a threaded hole.

Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

Press these bumpers into place with the adhesive backing. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. They're comparable to Bumpon bumpers.

Select these bumpers for applications that require specific load capacities. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. Press them into place with the adhesive backing. They're comparable to Bumpon bumpers.

Mount these bumpers on a threaded stud. All are reinforced with a steel core or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines.

These bumpers withstand temperatures up to 300° F, which is at least twice as high as our other load rated bumpers. Use them in applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, these bumpers absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Mount them on a threaded stud.

Use screws or bolts to attach the mounting plate on these casters to a flat surface. Adjust the leveling pad to keep your equipment stationary and compensate for uneven floors.

Customize the length of your stem by adding any 1/2" dia. Grade 8 bolt through the hole in the frame.

Customize the length of your stem by adding any 1/2" dia. Grade 8 bolt through the hole in the frame.

Insert any 1/2" dia. Grade 8 bolt through the hole in the frame to create a custom-length stem.

Also known as twin-wheel casters, these lightweight casters are often used on furniture and displays.

As the standard for plastic wheels, phenolic wheels are nonmarking and perform well at high temperatures. They roll best on smooth surfaces but can be noisy.

Use these general purpose casters in a variety of applications.

These casters are offered with low mount heights to keep equipment like business machines and display fixtures stable. Their rubber wheels dissipate static to protect sensitive electronic equipment from electrostatic discharge.

The lightweight wheels on these casters provide impact resistance on smooth surfaces. They are the most economical wheel option. Their 304 stainless steel frame is corrosion resistant.

The soft rubber wheels are quiet, shock absorbing, and provide good traction on rough surfaces. Their 304 stainless steel frame is corrosion resistant.

Often used on furniture, the hood covers the wheel for a more finished appearance.

Also known as universal casters, press-fit these casters into standard 1" OD wire shelving posts.

Create a seamless joint between the top of these casters and the bottom of most swivel chairs.

Wheels range from soft rubber that absorbs shock while providing good traction on rough surfaces, to hard, impact-resistant rubber that rolls easily on smooth surfaces.

Easily replace casters on InterMetro carts and shelving—friction holds them in place in the 1" OD posts.

Also known as twin-wheel casters, these lightweight and economical casters are often used on furniture and displays.

The large stem on these casters fits into scaffold frames and round tubing.

Mount these casters to the side of equipment or on gates and doors. They are spring-loaded for good shock absorption.

Forged steel construction gives these casters the strength for demanding applications.

These are good general purpose casters for heavy loads.

Strong, thick frames make these casters suitable for medium and heavy duty applications.

Thicker frames, larger mounting plates, and a heavy duty swivel design make these casters more durable than other high-capacity casters.

A thick frame and metal debris guards on the wheel bearings ensure smooth operation and extended service life.