Use these metric mounts on heavy machines and equipment.

Able to withstand temperatures up to 350° F, these have the highest maximum temperature of our plastic mounts.

These mounts have a cushion on top to provide padding between your furniture and the mount.

Protect surfaces from scratches and wear.

Often used on wobbly tables, these mounts automatically adjust up to 5/16" to compensate for uneven floors.

A shield on the stud prevents dirt accumulation on the threads and provides a finished appearance.

Black-oxide steel has a dull shine for areas where appearance is a concern.

Yellow zinc-plated steel is more corrosion resistant than nickel-plated steel.

Made of 303 stainless steel, these metric mounts resist corrosion from water and most chemicals.

Made entirely of 316 stainless steel, these mounts have superior corrosion resistance.

Broader, stronger threads enable faster adjustments and higher load capacities than standard V-shaped threads.

Punch-out holes in the base let you bolt down these metric mounts to keep your equipment stationary.

Well-suited to damp environments, these mounts have a stainless steel stud and nut for corrosion resistance.

Well-suited to damp environments, these mounts have a stainless steel stud and nut for corrosion resistance.

Nickel-plated steel has some corrosion resistance.

Made entirely of 316 stainless steel, these mounts are our most resistant to corrosion from chemicals, solvents, and water.

Made of 303 stainless steel, these metric mounts resist corrosion from water and most chemicals.

Punch-out holes in the base let you bolt down these mounts to keep your equipment stationary.

Rated for high load capacity, use these metric inserts to connect threaded leveling mounts to heavy equipment.

Insert these adjustable mounts into tube ends to level your equipment in a single step.

All-stainless steel construction stands up to water and chemicals and won't rust or corrode.

A two-piece design requires less clearance than one-piece mounts and simplifies installation—raise your machine just enough to slide the base underneath, then insert the stud from above.

A two-piece design simplifies installation and requires less clearance than one-piece mounts.

An integral cushion reduces noise and vibration.

Screw these feet to the bottom of wood furniture legs.

Place these feet under furniture and equipment.

Excellent chemical resistance makes these PTFE plastic feet the best choice for harsh environments.

These feet are made of UHMW polyethylene plastic, so they won’t dry out and become brittle.

These feet have angled or rounded bottoms to work with tubular furniture legs that meet the floor at an angle.

These thick shims are scored to make size adjustments easy—break off the excess shim for a custom fit around fasteners or corners. Use them to align cabinets, doors, and windows, or for other rough leveling.

Use a single shim on feet or positioning arms that are secured with multiple fasteners. The slots let you insert, remove, and adjust the shims without disassembling your machinery. Also known as finger shims.

Keep slotted shims in a variety of thicknesses on hand with these sets, which are color-coded by thickness for easy identification. The slot lets you insert, remove, and adjust the shims without disassembling your machinery.

These shims are color-coded by thickness for easy identification. The slot lets you insert, remove, and adjust the shims without disassembling your machinery.

These shims are color-coded by thickness for easy identification. The horseshoe design fits around screws.

Clips on these shims hold them together when stacked, and they are color coded by thickness for easy identification. Designed to fit around screws, they are commonly used in window, door, and cabinet installations.

Cut this stock into custom shapes to fit your application.

A durable acrylic adhesive keeps this shim stock from sliding out of place. Cut it into custom shapes to fit your application.

Level dies, plates, presses, and other machine tools—this shim tape conforms to curves and uneven surfaces.

Ridges keep these shims from sliding apart when stacked.

Easily snap off any excess to get the length you need.

Send us a drawing, and we'll cut your custom shim.

Also known as machinery bushings, these shims have an oversized OD to create a larger bearing surface for reduced wear between moving parts.

For a snug fit around a shaft, the ID of these shims is held to a tighter tolerance than other round shims.

Be prepared with shims in a variety of thicknesses. Also known as arbor spacers, these shims are notched to fit over keyed shafts.

Precisely align, level, and adjust spacing on fasteners and shafts with these shims.

Be prepared with ring shims in a variety of thicknesses. These shims are color-coded by thickness for easy identification.

These shims are shaped to fit over D-profile shafts. Use them to precisely align, level, and adjust spacing.

Precisely align, level, and adjust spacing on fasteners, shafts, and machinery with these shims, which are color-coded by thickness for easy identification.

Be prepared with shims in a variety of thicknesses. These shims are shaped to fit over D-profile shafts. Use them to precisely align, level, and adjust spacing.

A slot in the side allows you to install and remove these washers without completely disassembling your joint.