Tamper-Resistant Torx Bits
An opening at the tip accommodates the pin in the recess of tamper-resistant Torx screws. These are also known as pin-in-Torx bits.
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
Hex shank bits for power tools have a groove in the shank and fit directly into power tools without an adapter. They offer more reach for recessed holes and less wobble compared to a hex shank bit used with an adapter.
For technical drawings and 3-D models, click on a part number.
| Drive Size | Overall Lg. | Material | Each | |
1/4" Hex Shank Size | ||||
|---|---|---|---|---|
| T7 | 1" | Steel | 0000000 | 00000 |
| T8 | 1" | Steel | 0000000 | 0000 |
| T9 | 1" | Steel | 0000000 | 0000 |
| T10 | 1" | Steel | 0000000 | 0000 |
| T15 | 1" | Steel | 0000000 | 0000 |
| T20 | 1" | Steel | 0000000 | 0000 |
| T25 | 1" | Steel | 0000000 | 0000 |
| T27 | 1" | Steel | 0000000 | 0000 |
| T30 | 1" | Steel | 0000000 | 0000 |
| T40 | 1" | Steel | 0000000 | 0000 |
1/4" Hex Shank Size for Power Tools | ||||
| T7 | 2" | Steel | 0000000 | 0000 |
| T7 | 6" | Steel | 0000000 | 00000 |
| T8 | 2" | Steel | 0000000 | 0000 |
| T8 | 6" | Steel | 0000000 | 00000 |
| T9 | 2" | Steel | 0000000 | 0000 |
| T9 | 6" | Steel | 0000000 | 00000 |
| T10 | 2" | Steel | 0000000 | 0000 |
| T10 | 6" | Steel | 0000000 | 00000 |
| T15 | 2" | Steel | 0000000 | 0000 |
| T15 | 6" | Steel | 0000000 | 00000 |
| T20 | 2" | Steel | 0000000 | 0000 |
| T20 | 6" | Steel | 0000000 | 00000 |
| T25 | 2" | Steel | 0000000 | 0000 |
| T25 | 6" | Steel | 0000000 | 00000 |
| T27 | 2" | Steel | 0000000 | 0000 |
| T27 | 6" | Steel | 0000000 | 00000 |
| T30 | 2" | Steel | 0000000 | 0000 |
| T30 | 6" | Steel | 0000000 | 00000 |
| T35 | 2" | Steel | 0000000 | 0000 |
| T35 | 6" | Steel | 0000000 | 00000 |
| T40 | 2" | Steel | 0000000 | 0000 |
| T40 | 6" | Steel | 0000000 | 00000 |
| T45 | 2" | Steel | 0000000 | 0000 |
| T45 | 6" | Steel | 0000000 | 00000 |
| T50 | 2" | Steel | 0000000 | 0000 |
| T50 | 6" | Steel | 0000000 | 00000 |
| T55 | 6" | Steel | 0000000 | 00000 |
5/16" Hex Shank Size | ||||
| T40 | 1 1/4" | Steel | 00000000 | 0000 |
| T45 | 1 1/4" | Steel | 00000000 | 0000 |
| T50 | 1 1/4" | Steel | 00000000 | 0000 |
| T55 | 1 1/4" | Steel | 00000000 | 0000 |
Reversible Tamper-Resistant Torx Bits
Turn two fastener sizes with one reversible bit—remove and replace to change the size. These bits have an opening at the tips to accommodate the pin in the recess of tamper-resistant Torx screws. Also known as insert bits, they are used in hand drivers.
For technical drawings and 3-D models, click on a part number.
Tamper-Resistant Pentalobe and Torx Plus Bits
An opening at the tip accommodates the pin in the recess of tamper-resistant pentalobe and tamper-resistant Torx Plus screws. Use these bits (also known as insert bits) in hand drivers or with a bit adapter in power tools.
For technical drawings and 3-D models, click on a part number.
Bit Assortments
These assortments contain general-purpose bits.
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
 |  Hex |  Tamper-Resistant Hex |  Phillips |  Slotted |  Torx |  Square |
 Drilled Spanner |  Pozidriv® |  Tamper-Resistant Torx |  Torq-Set® |  Tri-Wing® |
| No. of Pieces | Components Included | Bits Included | Adapters Included | Drive Tools Included | Each | |
1/4" Hex Shank Size—Steel | ||||||
|---|---|---|---|---|---|---|
| 30 | 26 Bits 3 Adapters 1 Drive Tool | Drilled Spanner: No. 6, No. 8 No. 10 (1" O'all Lg.) Pozidriv®: No. 2 (1" O'all Lg.) Square: No. 1, No. 2 (1" O'all Lg.) Tamper-Resistant Hex: 3/32", 7/64", 1/8", 9/64" T25, T27, T30, T40 (1" O'all Lg.) 5/32", 3/16", 7/32", 1/4" (1" O'all Lg.) Tamper-Resistant Torx: T9, T10, T15, T20 Torq-Set®: No. 5, No. 8 (1" O'all Lg.) Tri-Wing®: No. 4, No. 5 (1" O'all Lg.) | 1/8" Male Square Drive × 1/8" Hex Shank Adapter 1/4" Male Square Drive × 1/4" Hex Shank Adapter 2 1/8" Lg. Bit Adapter for Power Tools | 8 3/4" Lg. Bit Screwdriver | 000000 | 000000 |
| 39 | 36 Bits 2 Adapters 1 Drive Tool | Drilled Spanner: No. 4, No. 6, No. 8, No. 10 (1" O'all Lg.) Phillips: No. 1, No. 2 (1" O'all Lg.) Pozidriv®: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.) Slotted: 1/4", 5/16" (1" O'all Lg.) Square: No. 1, No. 2, No. 3 (1" O'all Lg.) T25, T27, T30, T40 (1" O'all Lg.) Tamper-Resistant Hex: 5/64", 3/32", 7/64" 1/8", 9/64", 5/32" (1" O'all Lg.) Tamper-Resistant Torx: T8, T10, T15, T20 Torq-Set®: No. 6, No. 8, No. 10 (1" O'all Lg.) Tri-Wing®: No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.) | 1/4" Female Square Drive × 1/4" Female Hex Adapter 2 1/4" Lg. Bit Adapter for Power Tools | Screwdriver Handle | 0000000 | 00000 |
| 100 | 96 Bits 4 Adapters | Drilled Spanner: No. 4, No. 6, No. 8, No. 10 No. 12, 1/4" (1" O'all Lg.)—1 ea. Hex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64" 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" 5/16", 3/8" (1" O'all Lg.)—1 ea. Hex (Metric): 1.5 mm, 2 mm, 2.5 mm, 3 mm 4 mm, 5 mm, 6 mm, 7 mm, 8 mm (1" O'all Lg.)—1 ea. Phillips: No. 0 (1" O'all Lg.)—1 ea. Phillips: No. 1, No. 3 (1" O'all Lg.)—2 ea. Phillips: No. 2 (1" O'all Lg.)—4 ea. Pozidriv®: No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea. Screw-In Hook Driver Bit—1 ea. Slotted: 3/32", 1/8", 5/32", 3/16", 7/32", 1/4" 9/32", 5/16", 3/8" (1" O'all Lg.)—1 ea. Square: No. 0, No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)—1 ea. Tamper-Resistant Hex (Inch): 3/32" 7/64", 1/8", 9/64", 5/32", 3/16", 7/32" 1/4", 5/16" (1" O'all Lg.)—1 ea. Tamper-Resistant Hex (Metric): 2.5 mm, 3 mm 4 mm, 5 mm, 6 mm, 8 mm (1" O'all Lg.)—1 ea. Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15 T20, T25, T27, T30, T40 (1" O'all Lg.)—1 ea. Torx: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27 T30, T40, T45, T50, T55 (1" O'all Lg.)—1 ea. | 1/4" Male Square Drive × 1/4" Hex Shank Adapter (1" O'all Lg.) 1/4" Male Square Drive × 1/4" Hex Shank Adapter (2" O'all Lg.) 2 1/2" Lg. Bit Adapter for Power Tools Bit Adapter for Square Drive Tools | __ | 000000 | 00000 |
Tamper-Resistant Torx Bit Sets
An opening at the tip accommodates the pin in the recess of tamper-resistant Torx screws. These are also known as pin-in-Torx bits
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
Hex shank bits for power tools have a groove in the shank and fit directly into power tools without an adapter. They offer more reach for recessed holes and less wobble compared to a hex shank bit used with an adapter.
For technical drawings and 3-D models, click on a part number.
| Components Included | Bits Included | Material | Container Type | Each | |
1/4" Hex Shank Size | |||||
|---|---|---|---|---|---|
| 7 Bits | Tamper-Resistant Torx: T7, T8, T9, T10, T15, T20, T25 (1" O'all Lg.) | Steel | Plastic Case | 0000000 | 000000 |
1/4" Hex Shank Size for Power Tools | |||||
| 10 Bits | Tamper-Resistant Torx: T7, T8, T9, T10, T15, T20, T25, T27, T30, T40 (2" O'all Lg.) | Steel | Plastic Caddy | 0000000 | 00000 |
Bit Screwdrivers
Insert a bit into the shaft and a magnet holds it in place.
Tamper-resistant Torx are also known as pin-in-Torx.
Tamper-resistant hex are also known as pin-in-hex.
Shaft | Material | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Sizes | Sizes Included | O'all Lg. | Lg. | O'all Wd. | Shaft | Bit | Handle | Grip Style | Features | Each | |
For 1/4" Bit Hex Shank Size | |||||||||||
| 10 | External Hex: 1/4", 5/16" Tamper-Resistant Torx: T7, T8, T9, T10, T15, T20, T25, T27 | 9 1/2" | 4" | 7/16" | Nickel-Plated Steel | Steel | Steel | Plain | __ | 0000000 | 000000 |
| 26 | Drilled Spanner: No. 4, No. 6, No. 8, No. 10 Tamper-Resistant Hex: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 2mm, 2.5mm, 3mm, 5mm Tamper-Reistant Torx: T7, T8, T10, T15, T20, T25, T27, T30, T40 Torq Set®: No. 6, No. 8, No. 10 | 8 1/2" | 3 3/8" | 5/16" | Stainless Steel | Steel | Plastic | Plain | Bit storage inside tool | 0000000 | 00000 |