Air Powered Oil Dispensers

Filter by

For Use With

Power Source

Container Type

System of Measurement

Container Size

Nozzle Type

Material

Capacity

Maximum Pressure

1,000 psi to 1,999 psi

3,000 psi to 9,999 psi

10,000 psi or greater

Pipe Size

Discharge Pipe Size

Housing Material

Flow Rate

For Maximum SAE Viscosity Grade

Air Inlet Pipe Size

Maximum Temperature

Maximum Flow Rate

Intake Pipe Size

Voltage

Thread Type

Dispensing Tip Material

RoHS

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

REACH

203 Products

Air-Powered Hand-Held Oil Dispensers

Deliver a mist of oil using shop air. A knob on the handle adjusts the amount of oil dispensed. Twist the dispensing tip to adjust the spray pattern. Flow rate depends on temperature.

		Nozzle						Air Inlet
Cap., qt.	Flow Rate, gph	Type	Lg.	Material	Dispensing Tip Material	Body Material	Air Consumption @ Pressure	Pressure, psi	Thread Type	Pipe Size	Gender	Features		Each
1	15	Rigid	12"	Aluminum	Brass	Steel	9 ft³/min @ 100 psi	80 to 120	NPT	1/4	Female	Adjustable Spray Pattern	13945K41	0000000

Air-Powered Oil-Dispensing Pumps


1 Pump	2 Pumps	4 Pumps	6 Pumps

1 Pump with Spray Nozzle	2 Pumps with Spray Nozzle	4 Pumps with Spray Nozzle

Connect these modular pumps to your air system and add a reservoir and solenoid valve (sold separately) to automate the flow of oil. Install or remove pumps as your lubrication needs change. Each pump has a separate flow adjustment; use a screwdriver to turn the flow-adjustment screw.

Note: For proper operation, pumps require a three-way solenoid valve (sold separately). The solenoid can be controlled by a timer or PLC (programmable logic controller).

Oil-Dispensing Pumps with Spray Nozzle—Pumps with spray nozzle provide a broader dispensing pattern. Nozzle bends and stays in position.

						Oil Inlet			Overall				Air Inlet				Mounting		For Max. Viscosity
	No. of Pumps	oz. per Cycle, fl. oz.	Dispensing Interval, sec.	Max. Oil Outlet Pressure, psi	Pump Material	Thread Type	Pipe Size	Gender	Ht.	Wd.	Dp.	Air Inlet Pressure, psi	Thread Type	Pipe Size	Gender	Temp. Range, ° F	Hole Dia.	Fasteners Included	ISO Grade	SAE Grade	SSU Grade, SSU	AGMA Grade		Each
Oil-Dispensing Pumps







				1/8 NPT Female Oil Outlets

				1	0 to 0.007	0.5 to 1	1,080	Aluminum	NPT	1/8	Female	4"	2"	1 1/8"	40 to 120	NPT	1/8	Female	-15 to 180	9/32"	No	220	90	1,000	5	2279K51	0000000


				2	0 to 0.007	0.5 to 1	1,080	Aluminum	NPT	1/8	Female	4"	3 1/4"	1 1/8"	40 to 120	NPT	1/8	Female	-15 to 180	9/32"	No	220	90	1,000	5	2279K52	000000
				4	0 to 0.007	0.5 to 1	1,080	Aluminum	NPT	1/8	Female	4"	5 3/4"	1 1/8"	40 to 120	NPT	1/8	Female	-15 to 180	9/32"	No	220	90	1,000	5	2279K53	000000
				6	0 to 0.007	0.5 to 1	1,080	Aluminum	NPT	1/8	Female	4"	8 1/4"	1 1/8"	40 to 120	NPT	1/8	Female	-15 to 180	9/32"	No	220	90	1,000	5	2279K54	000000


				Oil-Dispensing Pumps with Spray Nozzle







								1/8 NPT Female Oil Outlets

								1	0 to 0.007	0.5 to 1	1,080	Aluminum	NPT	1/8	Female	4"	2"	1 1/8"	40 to 120	NPT	1/8	Female	-15 to 180	9/32"	No	220	90	1,000	5	2279K41	000000


								2	0 to 0.007	0.5 to 1	1,080	Aluminum	NPT	1/8	Female	4"	3 1/4"	1 1/8"	40 to 120	NPT	1/8	Female	-15 to 180	9/32"	No	220	90	1,000	5	2279K42	000000
								4	0 to 0.007	0.5 to 1	1,080	Aluminum	NPT	1/8	Female	4"	5 3/4"	1 1/8"	40 to 120	NPT	1/8	Female	-15 to 180	9/32"	No	220	90	1,000	5	2279K43	000000

Accessories and Replacements for Oil-Dispensing Pumps

		Each
Add-On Pump, 1 ¼" Wd.	2279K31	0000000
Add-On Pump with Spray Nozzle, 1 ¼" Wd.	2279K33	000000
Replacement Zinc-Plated Steel Nozzles, 8" Lg.	2279K61	00000

Air-Powered Container-Mount Oil Dispensers

Drum Not Included

Driven by an air-powered pump, this dispenser comes with an adapter to mount through a bung opening on a drum of oil (not included).

					Air Inlet					For Max. Viscosity
For Container Size, gal.	Flow Rate, gpm	Max. Oil Outlet Pressure, psi	Oil Outlet Hose Lg., ft.	Material	Pressure, psi	Hose Lg., ft.	Thread Type	Pipe Size	Gender	ISO Grade	SAE Grade	SSU Grade, SSU	AGMA Grade	Includes		Each
55	1.8	540	6	Aluminum	40 to 180	6	NPT	3/8	Female	1500	250	9,000	8	Bung Adapter with a 2 NPT Male Connection, Pump, Air Inlet Hose, Air Pressure Regulator with Gauge, Oil Outlet Hose	2332K5	000000000

Air-Powered Oil Dispensers

Connect these dispensers to your air system to pressurize the oil in the reservoir and atomize the spray. Dual regulators allow you to adjust the pressure of the oil and the atomized spray. Add a spray valve (sold separately) to direct the flow of oil. A removable filter prevents valve blockage. They have NPTF (Dryseal) threads, which are compatible with NPT threads.

			Overall				Air Inlet			Air Outlet
	Cap.	Max. Oil Outlet Pressure, psi	Ht.	Wd.	Dp.	Max. Air Inlet Pressure, psi	Thread Type	Pipe Size	Gender	Thread Type	Pipe Size	Gender	Temp. Range, ° F	Mounting Hole Thread Size	For Max. ISO Viscosity Grade		Each
1/8 NPTF Female Oil Outlet



		2 qt.	30	14 1/4"	5 13/16"	5 13/16"	125	NPTF	1/4	Female	NPTF	1/8	Female	-30 to 140	5/16"-24	150	12745K52	0000000


		1 gal.	30	19 1/4"	5 13/16"	5 13/16"	125	NPTF	1/4	Female	NPTF	1/8	Female	-30 to 140	5/16"-24	150	12745K54	000000
		2 gal.	30	32 1/4"	5 13/16"	5 13/16"	125	NPTF	1/4	Female	NPTF	1/8	Female	-30 to 140	5/16"-24	150	12745K56	00000000

Accessories and Replacements for Oil Dispensers

Spray Valves

		Oil Inlet			Air Inlet			Flat Spray Pattern		Round Spray Pattern
Nozzle Material	Body Material	Thread Type	Pipe Size	Gender	Thread Type	Pipe Size	Gender		Each		Each
Brass	Aluminum	NPTF	1/8	Female	NPTF	1/8	Female	12745K71	0000000	12745K72	0000000

Material	Ht.	OD	ID	Max. Temp., ° F		Each
Rayon	1 3/8"	3/4"	5/8"	360	12745K74	000000

Air-Powered Oil-Dispensing Pump Systems


2 Pumps	4 Pumps

Ready to connect to your air system, these complete systems include a timer and a reservoir. Turn the dials to set the cycle interval. Each pump has a separate flow adjustment; use a screwdriver to turn the flow-adjustment screw. Pumps and their components come mounted on a panel.

					Panel											For Max. Viscosity
No. of Pumps	Cap.	oz. per Cycle, fl. oz.	Dispensing Interval	Max. Oil Outlet Pressure, psi	Ht.	Wd.	Reservoir Material	Pump Material	Air Inlet Pressure, psi	Air Inlet Gender	For Air Inlet Tube OD	Voltage, V AC	Current, amp	Temp. Range, ° F	Mounting Fasteners Included	ISO Grade	SAE Grade	SSU Grade, SSU	AGMA Grade		Each







			1/8 NPT Female Oil Outlets

			2	16 fl. oz.	0 to 0.007	0.6 sec. to 24 hr.	1,080	10 3/4"	10 7/8"	Plastic	Aluminum	40 to 120	Female	1/4"	120	0.06	-15 to 180	No	220	90	1,000	5	2420K1	0000000


			4	1 qt.	0 to 0.007	0.6 sec. to 24 hr.	1,080	10 3/4"	10 7/8"	Plastic	Aluminum	40 to 120	Female	1/4"	120	0.06	-15 to 180	No	220	90	1,000	5	2420K2	000000

Replacement Reservoirs

	Oil Outlets				Overall					Mounting
Cap.	No. of	Thread Type	Pipe Size	Gender	Ht.	Wd.	Dp.	Reservoir Material	Temp. Range, ° F	Thread Size	Hole Dia.	Fasteners Included		Each
16 fl. oz.	1	NPT	1/8	Female	5 9/16"	3 1/4"	3 1/4"	Plastic	0 to 225	5/8"-18	—	—	2420K61	000000
1 qt.	1	NPT	1/8	Female	6 13/16"	4 3/8"	4 3/8"	Plastic	0 to 225	5/8"-18	13/64"	No	2420K62	00000

Mist Coolant Dispensers with Reservoir


Style A	Style B	Style C

Style D	Style E	Style F

Style G

These dispensers have a reservoir and controls for coolant flow. Designed to cool short and intermittent machine cycles, misting dispensers dissipate heat more efficiently than droplet dispensers, while using considerably less fluid than flood dispensers.

Styles E and F—Styles E and F have any-which-way nozzles that stay in place once positioned.

					Coolant Outlet			Nozzle				Reservoir
	Style	Cap.	Flow Rate @ Pressure	Max. Pressure, psi	No. of	Hose Lg., ft.	Hose Material	Lg.	Type	Material	Overall Ht.	Wd.	Dp.	Dia.	Reservoir Material	For Max. SSU Viscosity Grade, SSU	Air Inlet Pressure, psi		Each
For Use With Coolant and Water



		A	32 fl. oz.	0.1 gph @ 100 psi	100	1	5	Polyurethane Rubber	6"	Rigid	Brass	8 1/2"	5 1/4"	4"	—	Polyethylene	35	50 to 100	1324K52	0000000


		B	32 fl. oz.	0.1 gph @ 100 psi	100	1	5	Brass	6"	Rigid	Brass	8 1/2"	5 1/4"	4"	—	Polyethylene	35	50 to 100	1324K73	000000
		C	1 gal.	0.2 gph @ 100 psi	100	1	5	Brass	6"	Rigid	Brass	12 1/4"	10"	5 1/4"	—	Polyethylene	35	50 to 100	1324K86	000000
		C	1 gal.	0.3 gph @ 100 psi	100	2	5	Brass	6"	Rigid	Brass	12 1/4"	10"	5 1/4"	—	Polyethylene	35	50 to 100	1324K34	000000
		D	1 gal.	6 gph @ 125 psi	125	1	4	Nylon	6"	Rigid	Brass	10 3/4"	7 3/4"	3 1/2"	—	Stainless Steel	Not Rated	30 to 120	1131K14	000000
		D	1 gal.	6 gph @ 125 psi	125	2	4	Nylon	6"	Rigid	Brass	10 3/4"	7 3/4"	3 1/2"	—	Stainless Steel	Not Rated	30 to 120	1131K18	000000
		D	3 gal.	6 gph @ 125 psi	125	2	4	Nylon	6"	Rigid	Brass	13 3/4"	8 5/8"	6"	—	Stainless Steel	Not Rated	30 to 120	1131K19	000000
		E	1 gal.	6 gph @ 125 psi	125	1	4	Nylon	12"	Flexible	Acetal	10 3/4"	7 3/4"	3 1/2"	—	Stainless Steel	Not Rated	30 to 120	1131K16	000000


		For Use With Coolant, Water, and Cutting Oil



				F	1 gal.	Not Rated	120	1	4	Polyethylene	12"	Flexible	PVC	12"	—	—	7"	Steel	30	30 to 125	1199K31	000000


				F	1 gal.	Not Rated	120	2	4	Polyethylene	12"	Flexible	PVC	12"	—	—	7"	Steel	30	30 to 125	1199K32	000000
				G	2 gal.	Not Rated	120	1	4	Polyethylene	3"	Rigid	PVC	10"	10"	6"	—	Steel	30	30 to 125	1199K1	000000
				G	2 gal.	Not Rated	120	2	4	Polyethylene	3"	Rigid	PVC	10"	10"	6"	—	Steel	30	30 to 125	1199K2	000000
				G	2 gal.	Not Rated	120	4	4	Polyethylene	3"	Rigid	PVC	10"	10"	6"	—	Steel	30	30 to 125	1199K4	000000

Accessories and Replacements for Coolant Dispensers

Replacement Hose

For Style	Component		Each
A	5-Ft. Polyurethane Rubber Outlet Hose	1324K222	0000000
B, C	5-Ft. Brass Outlet Hose	1324K211	000000
D	4-Ft. Nylon Plastic Outlet Hose with 45°-Angle Brass Nozzle	1131K53	00000
D, E	Coolant Inlet Hose	1131K64	00000
E	4-Ft. Nylon Plastic Outlet Hose with Any-Which-Way Plastic Nozzle	1131K65	000000
F	4-Ft. Polyethylene Plastic Outlet Hose with Stainless Steel Braid	1199K6	00000
F	5-Ft. Polyethylene Plastic Outlet Hose with Stainless Steel Braid	1199K57	00000
F, G	Coolant Inlet Hose	1199K62	00000
G	4-Ft. Polyethylene Plastic Outlet Hose	1199K8	00000
G	5-Ft. Polyethylene Plastic Outlet Hose	1199K58	00000

For Style	Component		Each
A, B	Liquid-Level Gauge	1324K17	000000
C	Sight Gauge	1324K16	00000

Replacement Coolant Nozzles

For Style	Component		Each
A, B, C	6" 45°-Angle Brass Nozzle	1324K244	000000
A, B, C	6" 90°-Angle Brass Nozzle	1324K255	00000
A, B, C	6" Straight Brass Nozzle	1324K233	00000
D	Magnetic Nozzle Mount	1131K24	00000
E	1 1/4" Brass Dispensing Tip	1131K58	00000
F	12" Any-Which-Way Plastic Nozzle with Base	1199K55	00000
G	3" 45°-Angle Rigid Stainless Steel Nozzle	1199K61	00000
G	3" Straight Rigid Stainless Steel Nozzle	1199K7	00000
G	Magnetic Nozzle Mount	1199K9	00000

For Style	Component		Each
D, E	Coolant Inlet Hose Ball Check	1131K63	000000

For Style	Component		Each
D, E	Valve Block	1131K61	000000

For Style	Component		Each
D, E	Valve Stem	1131K62	000000

For Style	Component		Each
F, G	1/16" Brass Tube Fitting for Steel	1199K65	000000

For Style	Component		Each
F, G	Air-Control Assembly	1199K64	000000
F, G	Liquid-Control Assembly	1199K63	00000

		Each
On/Off Air Switch for Styles D and E	1131K21	000000

Precision Air-Powered Grease-Dispensing Pumps


1 Grease Outlet	2 Grease Outlets

4 Grease Outlets	6 Grease Outlets

Powered by your air system, these dispensers release a precise amount of grease in timed intervals, so your machine will never have too much or too little. They’ll dispense the right amount even if changing temperatures affect the grease consistency. Back pressure doesn’t impact these dispensers either. But compared to motor-driven dispensers, they’re more complicated to set up. Besides your air system, you’ll need to attach a three-port solenoid valve and either a timer or programmable logic controller (PLC) to control the valve (all not included). If you use a PLC, they’ll prevent over-lubrication when your machine is down by only greasing when it’s running. This is useful for machines with intermittent downtime. Even without a PLC, you can manually cut off the flow without uninstalling the dispenser.

They’re modular, so install or remove pumps as your lubrication needs change. Each pump has mounting holes drilled through their body. Use a screwdriver to turn each pump’s flow-adjustment screw.

These dispensers don’t come with grease, so use the grease that’s best for your machine.

					Grease Outlet			Overall				Air Inlet
No. of Grease Outlets	Cap., fl. oz.	oz. per Cycle, fl. oz.	For NLGI Consistency Grade	Max. Grease Outlet Pressure, psi	Thread Type	Pipe Size	Gender	Ht.	Wd.	Max. Distance from Lubrication Point, ft.	Loading Method	Thread Type	Pipe Size	Gender		Each
1	1 1/2	0 to 0.007	00, 0, 1, 2	1,080	NPT	1/8	Female	8 5/16"	3 1/4"	3	Grease Gun	NPT	1/8	Female	2279K21	0000000
2	1 1/2	0 to 0.007	00, 0, 1, 2	1,080	NPT	1/8	Female	8 5/16"	4 1/2"	3	Grease Gun	NPT	1/8	Female	2279K22	000000
4	1 1/2	0 to 0.007	00, 0, 1, 2	1,080	NPT	1/8	Female	8 5/16"	7"	3	Grease Gun	NPT	1/8	Female	2279K23	000000
6	1 1/2	0 to 0.007	00, 0, 1, 2	1,080	NPT	1/8	Female	8 5/16"	9 1/2"	3	Grease Gun	NPT	1/8	Female	2279K24	000000

Grease-Dispensing Pumps

		Each
Add-On Dispenser, 1 ¼" Wd.	2279K31	0000000

Air-Powered Syringe Dispensers


With Controller, Foot Pedal, Vacuum Knob, and Touchscreen	With Controller

With Foot Pedal

Reduce fatigue by using pressure from your air compressor to dispense viscous fluids. These dispensers are especially useful for adhesives that are too thick and sticky to push out with the force of your thumb. Simply step down on the foot pedal for as long as you want to dispense out of the syringe barrel (sold separately for some dispensers). All have an air pressure control knob you can adjust to change the flow, depending on your material and the amount you want to dispense. Since you operate these dispensers with your foot, you’ll have both hands free to position the syringe barrel and make adjustments.

Vacuum Knob—Dispensers with a vacuum knob create suction to prevent dripping in between tasks. Adjust the suction depending on your material.

Controller—Dispensers with a controller can be set to release material for a certain amount of time and in intervals, regardless of how long you press down on the foot pedal. This makes it easier to control how much you dispense at a time.

Touchscreen—Dispensers with a touchscreen let you save up to 15 custom programs. Each program consists of its own pattern, such as a dot placed every three inches. Assign a sequence to the programs to dispense in a custom pattern. Often used in electronics assemblies, they can apply line after line or dot after dot of adhesive to your products.

				Air Inlet
	Ht.	Wd.	Dp.	Connection	Coupling Size	For Tube OD	Gender	Pressure Range, psi	Voltage Range, V AC	Includes		Each
With Foot Pedal



		3 3/4"	6 3/4"	3 3/4"	Push to Connect	—	1/4"	Male	0 to 100	—	Syringe Holder	5755N3	0000000


		With Foot Pedal and Vacuum Knob



				3 3/4"	6 3/4"	3 3/4"	Push to Connect	—	1/4"	Male	0 to 100	—	Syringe Holder	5755N4	000000


				With Controller, Foot Pedal, and Vacuum Knob



						7 3/4"	4 1/2"	5 1/2"	Quick Connect	1/8	—	Male	0 to 100	120 to 240	50 Dispensing Tips 8 Syringe Barrels 8 Syringe Pistons 4 Adapters (For 3 ml, 5 ml, 10 ml, 30 ml)	5755N2	000000


						With Controller, Foot Pedal, Vacuum Knob, and Touchscreen



								7 3/4"	4 1/2"	6 1/4"	Quick Connect	1/8	—	Male	0 to 100	120 to 240	50 Dispensing Tips 4 Syringe Pistons 4 Syringe Barrels 4 Adapters (For 3 ml, 5 ml, 10 ml, 30 ml)	5755N1	000000

Accessories for Syringe Dispensers

Finger Switches for Controllers

Image of Product. Front orientation. Push-Button Switches. Air-Powered Syringe Dispensers .

Attach a finger switch to your syringe barrel to dispense with a button instead of the foot pedal.

No. of Blades	Electrical Connection Type	Switch Starting Position	Housing Material	Cord Lg., ft.	Lg.	Wd.	Ht.		Each
3	Plug In	1 Off	Plastic	5	3/4"	1/4"	1/4"	5755N51	000000

Syringe Adapters

Adapters convert syringe barrels into air-powered dispensing syringes. They have a gasket that creates a tight seal around a barrel, preventing leaks. Use the included hose to connect your dispenser. The adapter head swivels 360°, so you can maneuver the syringe without worrying about the hose kinking.

		Hose
	For Syringe Cap.	ID	OD	Lg., ft.	Material	Includes		Each
Quick Connect Inlet Connection



		3 ml 0.1 fl. oz.	1/16"	5/32"	6	Polyurethane Rubber	Gasket, Hose Fitting	5988N11	000000


		5 ml 0.17 fl. oz.	1/16"	5/32"	6	Polyurethane Rubber	Gasket, Hose Fitting	5988N21	00000
		10 ml 0.34 fl. oz.	1/16"	5/32"	6	Polyurethane Rubber	Gasket, Hose Fitting	5988N31	00000
		30 ml 1.01 fl. oz.	1/16"	5/32"	6	Polyurethane Rubber	Gasket, Hose Fitting	5988N41	00000

Syringe Holders

Adapter,

Syringe, and

Syringe Holder

(Sold Separately)

Hang syringes when not in use to prevent contamination and spills. Or use these holders with air-powered dispensers to apply adhesive hands-free. In this setup, instead of moving your syringe around your workpiece, you slide your workpiece underneath your syringe. These holders work with most 5 ml to 30 ml syringes.

For No. of Syringes	Hole Dia.	Ht.	Wd.	Dp.	Material		Each
2	0.68", 1.04"	6 1/2"	3"	4 1/4"	Metal	66505A36	000000
3	0.61", 0.79", 1.08"	5 3/4"	3"	4"	Metal	5823N1	00000

Accessory Kits for 3 3⁄4" High Dispensers

Image of Product. Front orientation. Syringe Dispenser Accessory Kits. Air-Powered Syringe Dispensers .

Accessory kits are required for 3 3/4" high dispensers.

Includes		Each
4 Adapters (For 3 ml, 5 ml, 10 ml, 30 ml) 8 Syringe Barrels 8 Syringe Pistons 12 Dispensing Needles Reducer Fitting (5/32" OD to 1/4" OD)	5755N6	0000000

Air-Powered Constant-Flow-Rate Piston Pumps

Commonly called piston pumps, these are often used in high-pressure applications, such as hydrostatic testing of pipelines, tanks, and valves. Flow and outlet liquid pressure can be controlled by varying the air pressure. To calculate discharge liquid pressure, multiply the air pressure by the ratio shown in the table. Pumps are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber.

Note: Pumps must be filled with liquid before use. They need a constant flow of liquid and cannot run dry.

	Flow Rate, gpm					Air Pressure, psi						Overall
	@ 0 psi	@ 3,000 psi	Max. ft. of Head, ft.	Max. Discharge Pressure, psi	Max. Viscosity, cP	Min.	Max.	Air Consumption, scfm	Air Connection (NPT)	Intake Pipe Connection (NPT)	Discharge Pipe Connection (NPT)	Lg.	Wd.	Ht.		Each
86:1 Discharge Liquid to Inlet Air Pressure Ratio



		0.19	0.17	28,764	12,470	100	15	145	20	1/4 Female	3/8 Female	1/4 Female	4 5/8"	4"	9"	6770K43	000000000


		28:1 Discharge Liquid to Inlet Air Pressure Ratio



				0.58	0.13	9,365	4,060	100	15	145	20	1/4 Female	3/8 Female	1/4 Female	4 5/8"	4"	9"	6770K41	00000000

Mist Coolant Dispensers


A (Shown with Magnetic Base)	Style B	Style C

Designed to cool short and intermittent machine cycles, misting dispensers dissipate heat more efficiently than droplet dispensers, while using considerably less fluid than flood dispensers.

Style A—Style A can be used with a magnetic nozzle mount (sold separately).

Style B—Style B come with a magnetic base. They have any-which-way nozzles that stay in place once positioned.

Style C—Style C come with a magnetic base. They have any-which-way nozzles that stay in place once positioned. Style C has separate air and liquid controls and a built-in regulator for accurate mixing.

				Coolant Outlet			Nozzle					Dispensing Tip
	Style	Flow Rate @ Pressure	Max. Pressure, psi	No. of	Hose Lg., ft.	Hose Material	Lg.	Type	Material	Mount Method	Bend Radius	Lg.	Material	Air Inlet Pressure, psi	Coolant Inlet Hose Lg., ft.	For Max. SSU Viscosity Grade, SSU	Includes		Each
For Use With Coolant and Water



		A	6 gph @ 125 psi	125	1	2	Nylon	4"	Rigid	Brass	—	—	3/4"	Brass	30 to 120	4	Not Rated	—	1186K17	000000


		B	0.3 gph @ 100 psi	100	1	—	—	7"	Flexible	Acetal	Magnetic	1 1/4"	1 1/2"	Brass	50 to 100	7	35	—	1046K18	000000


		For Use With Coolant, Water, and Cutting Oil



				C	105 gph @ 30 psi	30	1	—	—	13"	Flexible	Polypropylene	Magnetic	1"	1"	Polypropylene	10 to 50	10	Not Rated	Quick-Disconnect Fitting for Air Inlet	10445K34	000000

Accessories and Replacements for Coolant Dispensers

		Each
Magnetic Nozzle Mount Base for Style A	1131K23	000000
Replacement Dispensing Tip for Style A	1186K56	00000
4-ft. Outlet Hose with Nozzle and Dispensing Tip for Style A	1186K54	00000
Replacement Outlet Hose with Nozzle and Dispensing Tip for Style A	1186K52	00000

Air-Powered Container-Mount Grease Dispensers

Dispense from your drum or pail of grease using compressed air. Dispensers include a follower plate that moves down the inside of the container as the grease level drops to compress the grease and prevent vapor pockets. Containers not included.

Dispensers deliver grease at the same pressure as your existing grease system, up to the max. grease outlet pressure.

For 35 lb. Pail


Style A	Style B

With Booster Gun—Dispensers with a booster gun allow you to increase the pressure to the value listed for max. grease outlet pressure with booster.

Styles A and B—Styles A and B have a Z-swivel that connects the outlet hose to the gun and prevents the hose from kinking.

	Dispensers																		Replacement Follower Plates
		For Container									Air Inlet
	Style	Max. Dia.	Max. Ht.	For NLGI Consistency Grade	Flow Rate, fl oz/min	Container Included	Max. Grease Outlet Pressure, psi	Max. Grease Outlet Pressure with Booster, psi	Grease Outlet Hose Lg., ft.	Material	Max. Pressure, psi	Thread Type	Pipe Size	Gender	For Grease Fitting Style	Includes		Each		Each
With Booster Gun



		A	12 3/16"	12 13/16"	00, 0, 1, 2	16	No	7,500	10,000	13	Steel	150	NPT	1/4	Female	Standard	Cover Follower Plate Four-Wheel Dolly Grease Outlet Hose Gun Pump Z-Swivel	1384K11	0000000	1384K87	000000


		B	12"	16 9/16"	00, 0, 1, 2	64	No	7,500	10,000	10	Steel	150	NPT	1/4	Female	Standard	Cover Follower Plate Grease Outlet Hose Gun Pump Z-Swivel	13585K51	00000000	1033K57	00000


		With Standard Gun



				B	12"	16 9/16"	00, 0, 1, 2	32	No	7,500	—	10	Steel	150	NPTF	1/4	Female	Standard	Cover Follower Plate Grease Outlet Hose Gun Pump Z-Swivel	1033K52	00000000	1033K57	00000

Repair Kits for Grease Dispensers

		Each
Lower Pump Repair Kit for Style A	1384K91	000000
Motor Repair Kit for Style A	1384K93	000000
Repair Kit for Style B, C, and D Dispensers with 32 oz./min. Flow Rate	1033K55	000000
Repair Kit for Style B, C, D, and E Dispensers with 64oz./min. Flow Rate	1033K56	000000

For 120 lb. Drum


Style A	Style C	Style D

With Booster Gun—Dispensers with a booster gun allow you to increase the pressure to the value listed for max. grease outlet pressure with booster.

Styles A, C, and D—Styles A, C, and D have a Z-swivel that connects the outlet hose to the gun and prevents the hose from kinking.

	Dispensers																		Replacement Follower Plates
		For Container									Air Inlet
	Style	Max. Dia.	Max. Ht.	For NLGI Consistency Grade	Flow Rate, fl oz/min	Container Included	Max. Grease Outlet Pressure, psi	Max. Grease Outlet Pressure with Booster, psi	Grease Outlet Hose Lg., ft.	Material	Max. Pressure, psi	Thread Type	Pipe Size	Gender	For Grease Fitting Style	Includes		Each		Each
With Booster Gun



		A	15 15/16"	26"	00, 0, 1, 2	16	No	7,500	10,000	13	Steel	150	NPT	1/4	Female	Standard	Cover Follower Plate Four-Wheel Dolly Grease Outlet Hose Gun Pump Z-Swivel	1384K13	000000000	1384K92	0000000


		C	14 7/8"	27 1/4"	00, 0, 1, 2	64	No	7,500	10,000	10	Steel	150	NPT	1/4	Female	Standard	Cover Follower Plate Four-Wheel Dolly Grease Outlet Hose Gun Pump Z-Swivel	13585K52	00000000	1033K58	000000
		D	14 7/8"	27 1/4"	00, 0, 1, 2	64	No	7,500	10,000	10	Steel	150	NPT	1/4	Female	Standard	Cover Follower Plate Grease Outlet Hose Gun Pump Two-Wheel Hand Truck Z-Swivel	13585K53	00000000	1033K58	000000


		With Standard Gun



				C	14 7/8"	27 1/4"	00, 0, 1, 2	32	No	7,500	—	10	Steel	150	NPTF	1/4	Female	Standard	Cover Follower Plate Four-Wheel Dolly Grease Outlet Hose Gun Pump Z-Swivel	1033K53	00000000	1033K58	000000


				D	14 7/8"	27 1/4"	00, 0, 1, 2	32	No	7,500	—	10	Steel	150	NPTF	1/4	Female	Standard	Cover Follower Plate Grease Outlet Hose Gun Pump Two-Wheel Hand Truck Z-Swivel	1033K54	00000000	1033K58	000000

Repair Kits for Grease Dispensers

		Each
Motor Repair Kit for Style A	1384K93	0000000
Repair Kit for Style B, C, and D Dispensers with 32 oz./min. Flow Rate	1033K55	000000
Repair Kit for Style B, C, D, and E Dispensers with 64oz./min. Flow Rate	1033K56	000000

For 400 lb. Drum


Style E

	Dispensers																					Replacement Follower Plates
		For Container						Grease Outlet					Air Inlet
	Style	Max. Dia.	Max. Ht.	For NLGI Consistency Grade	Flow Rate, fl oz/min	Container Included	Max. Grease Outlet Pressure, psi	Hose Lg., ft.	Thread Type	Pipe Size	Gender	Material	Max. Pressure, psi	Hose Lg., ft.	Thread Type	Pipe Size	Gender	For Grease Fitting Style	Includes		Each		Each
No Gun



		E	23 5/8"	36 13/16"	00, 0, 1, 2	64	No	7,500	4	NPT	3/8	Male	Steel	150	3	NPT	1/4	Female	Standard	Air Inlet Hose Cover Follower Plate Grease Outlet Hose Pump	13585K54	000000000	1033K59	0000000

Accessories for Grease Dispensers

Air-Powered Drum Pumps for Water, Oil, Coolants, and Chemicals

These pumps have a nonsparking air-powered motor for applications where electricity is unavailable or dangerous. Install an air line filter/lubricator to ensure efficiency and reduce wear on the pump. They're often used with ammonia, etching and cleaning solutions, and other caustics.

With NPT Discharge

			Temp., ° F							Intake		Discharge
Flow Rate, gpm	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Air Pressure, psi	Air Consumption, ft³/min	For Drum Opening Size	Includes	Air Connection	Tube OD	Tube Lg.	Gender	Pipe Size		Each
14	55	1,500	-30	300	40 to 80	27	2 NPT	Drum Connector	1/8 Female NPT	1 1/2"	39"	Female	3/4	42905K74	0000000

With Tube-End Discharge

			Temp., ° F							Intake		Discharge (Tube End)
Flow Rate, gpm	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Air Pressure, psi	Air Consumption, ft³/min	For Drum Opening Size	Includes	Air Connection	Tube OD	Tube Lg.	ID	Lg., ft.		Each
15	30	300	35	150	40	27	2 NPT	Drum Connector	1/4 Female NPT	1 1/4"	27"	3/4"	5	8165K7	0000000
15	55	300	35	150	40	27	2 NPT	Drum Connector	1/4 Female NPT	1 1/4"	40"	3/4"	5	8165K8	000000

Air-Powered Pistol-Grip Grease Guns

Use compressed air to dispense grease. This gun has a pistol grip that allows for one-hand operation, so it’s better for lubricating hard-to-reach spots than a lever-grip gun. Pull the trigger using small strokes to deliver small amounts of grease; hold the trigger for a continuous flow. The gun has a spring guard on the nozzle to prevent kinking.

						Nozzle		Nozzle Connection			Air Inlet
	Cap., fl. oz.	Flow Rate, fl oz/min	Strokes per oz.	For NLGI Consistency Grade	Max. Grease Outlet Pressure, psi	Lg.	Material	Thread Type	Pipe/Thread Size	Gender	Pressure, psi	Thread Type	Pipe Size	Gender	Loading Method		Each
For Standard Grease Fittings



		16	10	29	000, 00, 0, 1, 2, 3	6,000	30"	Nylon	NPT UNEF	1/8 7/16"-28	Male Male	40 to 150	NPS	1/4	Female	Bulk Filler Pump, Cartridge, Hand Pack, Suction	1454K38	0000000

Aluminum Air-Powered Double Diaphragm Pumps for Oil and Chemicals

A neoprene diaphragm resists oil and chemicals such as isopropyl alcohol and deionized water. These pumps have a rugged aluminum housing for moving large volumes of thick sludges and slurries in demanding environments. Pumps are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. All are submersible and can run dry.

Threaded Bottom Intake and Threaded Top Discharge

Image of Product. Front orientation. Double Diaphragm Pumps. Aluminum Air-Powered Double Diaphragm Pumps for Oil and Chemicals, Threaded Bottom Intake and Threaded Top Discharge.

Air Motor Pump Repair Kits—Air-motor repair kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.

Fluid Side Pump Repair Kits—Fluid-side repair kits include diaphragms, check valve balls, and seals.

	Double Diaphragm Pumps															Air Motor Pump Repair Kits		Fluid Side Pump Repair Kits
		Max. Flow Rate, gpm									Overall
	Max. Flow Rate, gpm	@ 80 ft. of Head	@ 120 ft. of Head	@ 160 ft. of Head	Max. Solids Dia.	Max. Viscosity, cP	Air Consumption, ft³/min	Air Connection Size	Intake Size	Discharge Size	Lg.	Wd.	Ht.		Each		Each		Each
289 ft. Maximum Feet of Head—125 psi Maximum Discharge Pressure



		15	12	10	7	1/8"	10,000	20	1/4 Female NPT	1/2 Female NPT	1/2 Female NPT	9"	10"	12"	9948K27	000000000	9948K58	0000000	———	0


		45	38	30	19	1/4"	20,000	40	1/2 Female NPT	1 Female NPT	1 Female NPT	13"	10"	13"	9948K18	00000000	3781K68	000000	3781K46	0000000
		106	77	62	45	1/4"	30,000	50	3/4 Female NPT	1 1/2 Female NPT	1 1/2 Female NPT	15"	17"	22"	9948K22	00000000	3781K63	000000	3781K43	000000
		235	174	127	90	3/8"	50,000	140	3/4 Female NPT	3 Female NPT	3 Female NPT	17"	20"	32"	9948K26	00000000	3781K63	000000	3781K38	00000000

Smooth-Flow Air-Powered Double Diaphragm Pumps

Also known as sprayer pumps, these provide a smooth, uniform flow for agricultural spraying, soap dispensing, and chemical transferring. They automatically turn on when you open the outlet valve. Pumps are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. Do not run dry.

Barbed Bottom Intake and Barbed Top Discharge

Image of Product. Front orientation. Double Diaphragm Pumps. Smooth-Flow Air-Powered Double Diaphragm Pumps, Barbed Bottom Intake and Barbed Top Discharge.

Buna-N Diaphragm—Buna-N diaphragm is oil resistant and often used with detergents.

Fluoroelastomer Diaphragm—Fluoroelastomer diaphragm is compatible with many etching and cleaning solutions that have a low concentration of nitric acid.

Air Motor Pump Repair Kits—Air-motor repair kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.

	Double Diaphragm Pumps														Air Motor Pump Repair Kits
		Max. Flow Rate, gpm								Overall
	Max. Flow Rate, gpm	@ 80 ft. of Head	@ 120 ft. of Head	Max. Viscosity, cP	Air Consumption, ft³/min	Air Tube Connection	Intake Tube Connection	Discharge Tube Connection	Diaphragm Material	Lg.	Wd.	Ht.		Each		Each
135 ft. Maximum Feet of Head—58 psi Maximum Discharge Pressure



		0.6	0.5	0.4	2,500	0.48	1/4" Barbed Male	3/8" Male	3/8" Male	Buna-N	4"	6"	6"	4022K47	0000000	4022K12	000000


		0.6	0.5	0.4	2,500	0.48	1/4" Barbed Male	3/8" Male	3/8" Male	Fluoroelastomer	4"	6"	6"	4022K36	000000	4022K11	00000

High-Pressure Air-Powered Drum Pumps for Oil

Transfer lubricating oil such as hydraulic and motor oil with these pumps. They handle nearly twice the amount of pressure as other air-powered drum pumps to move high-viscosity liquids. Install an air line filter/lubricator to ensure efficiency and reduce wear on the pump.

			Temp., ° F							Intake			Discharge
Flow Rate, gpm	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Air Pressure, psi	Air Consumption, ft³/min	For Drum Opening Size	Includes	Air Connection	Tube OD	Tube Lg.	Discharge Location	Connection	Pipe Size		Each



	6	15	8,750	10	150	0 to 150	14	2 NPT	Drum Connector	1/4 Female NPTF	1 3/4"	22"	Pump Body	Threaded	1/2 Female NPT	4262K52	0000000


	10	55	1,500	Not Rated	140	30 to 150	9	2 NPT	Drum Connector	1/4 Female NPT	2"	37"	Pump Body	Threaded	1/2 Female NPT	4346K35	000000

Connectors

Mist Coolant/Air Dispensers

Press the lever to stop coolant mist and start a high-velocity air stream to remove dust and shavings.

			Nozzle					Dispensing Tip				Coolant Inlet Hose
	Max. Pressure, psi	No. of Coolant Outlets	Lg.	Type	Material	Mount Method	Bend Radius	Lg.	Material	Spray Tip Type	Air Inlet Pressure, psi	Lg., ft.	Material		Each
For Use With Air, Coolant, and Water



		125	1	12"	Flexible	Plastic	Magnetic	3/4"	1 1/4"	Brass	Medium	85 to 125	4	Vinyl Plastic	1333K15	0000000


		125	1	18"	Flexible	Plastic	Magnetic	3/4"	1 1/4"	Brass	Medium	85 to 125	4	Vinyl Plastic	1333K16	000000

Replacements for Coolant Dispensers

Polypropylene Long-Life Air-Powered Drum Pumps for Chemicals

The polypropylene housing provides good resistance to caustics such as ammonia, electropolishing solutions, and detergents and cleaning fluids. Also known as diaphragm pumps, they have few moving parts that can fail for a long service life. Install an air line filter/regulator to ensure efficiency and reduce wear on the pump.

PTFE Diaphragm—Choose a pump with a PTFE diaphragm for superior resistance to a wider variety of concentrated chemicals than Santoprene.

Pump Repair Kits—Repair kits include components such as O-rings, valves, balls, and diaphragms.

Pumps																		Pump Repair Kits
			Temp., ° F							Intake				Discharge
Flow Rate, gpm	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Air Pressure, psi	Air Consumption, ft³/min	For Drum Opening Size	Includes	Air Connection	Connection	Pipe Size	Tube Lg.	Discharge Location	Connection	Pipe Size		Each		Each







			Santoprene Diaphragm

			13	55	3,000	30	180	100	12	2 NPT	Drum Connector	1/4 Female NPT	Threaded	1/2 Female NPT	36"	Pump Body	Threaded	1/2 Female NPT	2534K18	0000000	8281K46	0000000


			31	55	8,000	30	180	100	40	2 NPT	Drum Connector	1/4 Female NPT	Threaded	3/4 Female NPT	36"	Pump Body	Threaded	3/4 Female NPT	8281K55	00000000	8281K47	000000




					PTFE Diaphragm

					13	55	3,000	40	180	100	12	2 NPT	Drum Connector	1/4 Female NPT	Threaded	1/2 Female NPT	36"	Pump Body	Threaded	1/2 Female NPT	8281K52	000000	8281K111	000000


					28	55	8,000	40	180	100	40	2 NPT	Drum Connector	1/4 Female NPT	Threaded	3/4 Female NPT	36"	Pump Body	Threaded	3/4 Female NPT	8281K57	00000000	8281K48	000000

316 Stainless Steel Air-Powered Double Diaphragm Pumps for Chemicals, Fuel, and Flammable Liquids

With a 316 stainless steel housing and a PTFE diaphragm, these pumps resist a variety of acids, alkalies, and flammable liquids such as phosphoric acid, acetone, and methyl ethyl ketone (MEK). They're designed for moving large volumes of thick sludges and slurries in demanding environments. Pumps are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. All are submersible and can run dry.

Threaded Bottom Intake and Threaded Top Discharge

Image of Product. Front orientation. Double Diaphragm Pumps. 316 Stainless Steel Air-Powered Double Diaphragm Pumps for Chemicals, Fuel, and Flammable Liquids, Threaded Bottom Intake and Threaded Top Discharge.

Air Motor Pump Repair Kits—Air-motor repair kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.

Fluid Side Pump Repair Kits—Fluid-side repair kits include diaphragms, check valve balls, and seals.

	Double Diaphragm Pumps															Air Motor Pump Repair Kits		Fluid Side Pump Repair Kits
		Max. Flow Rate, gpm									Overall
	Max. Flow Rate, gpm	@ 80 ft. of Head	@ 120 ft. of Head	@ 160 ft. of Head	Max. Solids Dia.	Max. Viscosity, cP	Air Consumption, ft³/min	Air Connection Size	Intake Size	Discharge Size	Lg.	Wd.	Ht.		Each		Each		Each
289 ft. Maximum Feet of Head—125 psi Maximum Discharge Pressure



		15	12	10	7	1/8"	10,000	20	1/4 Female NPT	1/2 Female NPT	1/2 Female NPT	9"	10"	10"	41655K27	000000000	9948K58	0000000	3781K52	0000000


		45	38	30	19	1/4"	20,000	40	1/2 Female NPT	1 Female NPT	1 Female NPT	13"	10"	13"	41655K28	00000000	3781K68	000000	3781K47	000000
		106	77	62	45	1/4"	30,000	50	3/4 Female NPT	1 1/2 Female NPT	1 1/2 Female NPT	15"	17"	22"	41655K29	00000000	3781K63	000000	3781K44	00000000
		150	104	76	53	1/4"	40,000	100	3/4 Female NPT	2 Female NPT	2 Female NPT	15"	17"	26"	41655K31	00000000	3781K63	000000	3781K19	00000000
		235	174	127	90	3/8"	50,000	140	3/4 Female NPT	3 Female NPT	3 Female NPT	17"	20"	32"	41655K32	000000000	3781K63	000000	3781K39	00000000

316 Stainless Steel Air-Powered Double Diaphragm Pumps for Oil, Chemicals, Fuel, and Large Solids

With a 316 stainless steel housing and a fluoroelastomer diaphragm, these pumps resist a variety of harsh acids and alkalies, such as phosphoric acid, nitric acid, and sulfuric acid. They have large internal pathways and check valves with flaps to accommodate thick sewage, abrasive slurries, and industrial waste with large solids that would damage standard air-powered double diaphragm pumps. All are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. Pumps are submersible and can run dry.

Threaded Top Intake and Threaded Bottom Discharge

Image of Product. Front orientation. Double Diaphragm Pumps. 316 Stainless Steel Air-Powered Double Diaphragm Pumps for Oil, Chemicals, Fuel, and Large Solids, Threaded Top Intake and Threaded Bottom Discharge.

Air Motor Pump Repair Kits—Air-motor repair kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.

Fluid Side Pump Repair Kits—Fluid-side repair kits include diaphragms, check valve balls, and seals.

	Double Diaphragm Pumps															Air Motor Pump Repair Kits		Fluid Side Pump Repair Kits
		Max. Flow Rate, gpm									Overall
	Max. Flow Rate, gpm	@ 80 ft. of Head	@ 120 ft. of Head	@ 160 ft. of Head	Max. Solids Dia.	Max. Viscosity	Air Consumption, ft³/min	Air Connection Size	Intake Size	Discharge Size	Lg.	Wd.	Ht.		Each		Each		Each
289 ft. Maximum Feet of Head—125 psi Maximum Discharge Pressure



		70	47	35	20	1"	Not Rated	50	1/2 Female NPT	1 Female NPT	1 Female NPT	11"	17"	16"	2785K63	000000000	3781K58	0000000	8090K42	000000000

Aluminum Air-Powered Double Diaphragm Pumps for Fuel, Oil, and Large Solids

The fluoroelastomer diaphragm withstands higher temperatures than a neoprene diaphragm and has better resistance to fuel such as gasoline and kerosene. These pumps have large internal pathways and check valves with flaps to accommodate thick sewage, abrasive slurries, and industrial waste with large solids that would damage standard air-powered double diaphragm pumps. All are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. Pumps are submersible and can run dry.

Threaded Top Intake and Threaded Bottom Discharge


70 gpm Maximum Flow Rate	140 gpm Maximum Flow Rate

Air Motor Pump Repair Kits—Air-motor repair kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.

Fluid Side Pump Repair Kits—Fluid-side repair kits include diaphragms, check valve balls, and seals.

	Double Diaphragm Pumps															Air Motor Pump Repair Kits		Fluid Side Pump Repair Kits
		Max. Flow Rate, gpm									Overall
	Max. Flow Rate, gpm	@ 80 ft. of Head	@ 120 ft. of Head	@ 160 ft. of Head	Max. Solids Dia.	Max. Viscosity	Air Consumption, ft³/min	Air Connection Size	Intake Size	Discharge Size	Lg.	Wd.	Ht.		Each		Each		Each
289 ft. Maximum Feet of Head—125 psi Maximum Discharge Pressure



		70	47	35	20	1"	Not Rated	50	1/2 Female NPT	1 Female NPT	1 Female NPT	11"	17"	16"	8090K13	000000000	3781K58	0000000	8090K42	000000000


		140	120	96	77	2"	Not Rated	150	3/4 Female NPT	2 Female NPT	2 Female NPT	14"	22"	20"	8090K25	00000000	3781K57	000000	3781K16	00000000

Aluminum Air-Powered Double Diaphragm Pumps for Oil, Chemicals, and Fuel

These pumps have a PTFE diaphragm compatible with oil, fuel, and chemicals such as mineral spirits, methyl ethyl ketone (MEK), and xylene. They have a rugged aluminum housing for moving large volumes of thick sludges and slurries in demanding environments. Pumps are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. All are submersible and can run dry.

Threaded Bottom Intake and Threaded Top Discharge

Image of Product. Front orientation. Double Diaphragm Pumps. Aluminum Air-Powered Double Diaphragm Pumps for Oil, Chemicals, and Fuel, Threaded Bottom Intake and Threaded Top Discharge.

Air Motor Pump Repair Kits—Air-motor repair kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.

Fluid Side Pump Repair Kits—Fluid-side repair kits include diaphragms, check valve balls, and seals.

	Double Diaphragm Pumps															Air Motor Pump Repair Kits		Fluid Side Pump Repair Kits
		Max. Flow Rate, gpm									Overall
	Max. Flow Rate, gpm	@ 80 ft. of Head	@ 120 ft. of Head	@ 160 ft. of Head	Max. Solids Dia.	Max. Viscosity, cP	Air Consumption, ft³/min	Air Connection Size	Intake Size	Discharge Size	Lg.	Wd.	Ht.		Each		Each		Each
289 ft. Maximum Feet of Head—125 psi Maximum Discharge Pressure



		15	12	10	7	1/8"	10,000	20	1/4 Female NPT	1/2 Female NPT, 1/2 Female NPT	1/2 Female NPT, 1/2 Female NPT	9"	10"	12"	9948K16	000000000	9948K58	0000000	3781K52	0000000


		45	38	30	19	1/4"	20,000	40	1/2 Female NPT	1 Female NPT	1 Female NPT	13"	10"	13"	9948K19	00000000	3781K68	000000	3781K47	000000
		106	77	62	45	1/4"	30,000	50	3/4 Female NPT	1 1/2 Female NPT	1 1/2 Female NPT	15"	17"	22"	9948K21	00000000	3781K63	000000	3781K44	00000000
		150	104	76	53	1/4"	40,000	100	3/4 Female NPT	2 Female NPT	2 Female NPT	15"	17"	26"	9948K23	00000000	3781K63	000000	3781K19	00000000
		235	174	127	90	3/8"	50,000	140	3/4 Female NPT	3 Female NPT	3 Female NPT	17"	20"	32"	9948K24	00000000	3781K63	000000	3781K39	00000000

Aluminum Air-Powered Double Diaphragm Pumps for Oil, Chemicals, and Large Solids

A neoprene diaphragm stands up to oil and chemicals such as isopropyl alcohol and deionized water. These pumps have large internal pathways and check valves with flaps to accommodate thick sewage, abrasive slurries, and industrial waste with large solids that would damage standard air-powered double diaphragm pumps. Pumps are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. All are submersible and can run dry.

Threaded Top Intake and Threaded Bottom Discharge


70 gpm Maximum Flow Rate	140 gpm Maximum Flow Rate

Air Motor Pump Repair Kits—Air-motor repair kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.

Fluid Side Pump Repair Kits—Fluid-side repair kits include diaphragms, check valve balls, and seals.

	Double Diaphragm Pumps															Air Motor Pump Repair Kits		Fluid Side Pump Repair Kits
		Max. Flow Rate, gpm									Overall
	Max. Flow Rate, gpm	@ 80 ft. of Head	@ 120 ft. of Head	@ 160 ft. of Head	Max. Solids Dia.	Max. Viscosity	Air Consumption, ft³/min	Air Connection Size	Intake Size	Discharge Size	Lg.	Wd.	Ht.		Each		Each		Each
289 ft. Maximum Feet of Head—125 psi Maximum Discharge Pressure



		70	47	35	20	1"	Not Rated	50	1/2 Female NPT	1 Female NPT	1 Female NPT	11"	17"	16"	8090K11	000000000	3781K58	0000000	8090K41	0000000


		140	120	96	77	2"	Not Rated	150	3/4 Female NPT	2 Female NPT	2 Female NPT	14"	22"	20"	8090K22	00000000	3781K57	000000	3781K17	000000

Flanged Top Intake and Flanged Bottom Discharge

Image of Product. Front orientation. Double Diaphragm Pumps. Aluminum Air-Powered Double Diaphragm Pumps for Oil, Chemicals, and Large Solids, Flanged Top Intake and Flanged Bottom Discharge, 260 gpm Maximum Flow Rate.

260 gpm Maximum Flow Rate

Air Motor Pump Repair Kits—Air-motor repair kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.

Fluid Side Pump Repair Kits—Fluid-side repair kits include diaphragms, check valve balls, and seals.

	Double Diaphragm Pumps																				Air Motor Pump Repair Kits		Fluid Side Pump Repair Kits
		Max. Flow Rate, gpm									Flange			Bolt		Overall
	Max. Flow Rate, gpm	@ 80 ft. of Head	@ 120 ft. of Head	@ 160 ft. of Head	Max. Solids Dia.	Max. Viscosity	Air Consumption, ft³/min	Air Connection Size	Intake Size	Discharge Size	OD	Thk.	Pressure Class	Circle Dia.	Hole Dia.	Lg.	Wd.	Ht.		Each		Each		Each
289 ft. Maximum Feet of Head—125 psi Maximum Discharge Pressure



		260	178	150	118	3"	Not Rated	120	3/4 Female NPT	3	3	7 1/2"	7/8"	150	6"	5/8"	16"	37"	30"	8090K33	000000000	3781K57	0000000	3781K22	000000000

Plastic Air-Powered Double Diaphragm Pumps for Oil

A Buna-N diaphragm stands up to lubricating oil such as motor oil. These pumps are designed to handle thick sludges and slurries. They have a chemical-resistant polypropylene housing. Pumps are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. All are submersible and can run dry.

Threaded Bottom Intake and Threaded Top Discharge

Image of Product. Front orientation. Double Diaphragm Pumps. Plastic Air-Powered Double Diaphragm Pumps for Oil, Threaded Bottom Intake and Threaded Top Discharge.

Air Motor Pump Repair Kits—Air-motor repair kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.

Fluid Side Pump Repair Kits—Fluid-side repair kits include diaphragms, check valve balls, and seals.

	Double Diaphragm Pumps															Air Motor Pump Repair Kits		Fluid Side Pump Repair Kits
		Max. Flow Rate, gpm									Overall
	Max. Flow Rate, gpm	@ 40 ft. of Head	@ 120 ft. of Head	@ 160 ft. of Head	Max. Solids Dia.	Max. Viscosity, cP	Air Consumption, ft³/min	Air Connection Size	Intake Size	Discharge Size	Lg.	Wd.	Ht.		Each		Each		Each
231 ft. Maximum Feet of Head—100 psi Maximum Discharge Pressure



		14	12	8	5	1/8"	10,000	16	1/4 Female NPT	1/2 Female NPT, 1 Male NPT	1/2 Female NPT, 1 Male NPT	7"	10"	12"	4157K133	000000000	3781K72	0000000	3781K96	0000000


		23	19	13	8	5/32"	10,000	20	1/4 Female NPT	3/4 Female NPT, 1 1/2 Male NPT	3/4 Female NPT, 1 1/2 Male NPT	7"	12"	13"	4157K134	00000000	3781K72	000000	3781K73	000000

PTFE Air-Powered Double Diaphragm Pumps for Harsh Chemicals

With all PTFE wetted parts, these pumps offer the best chemical resistance of all our air-powered double diaphragm pumps and can handle solvents and petroleum-based fluids that PVDF pumps can’t. Pumps are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. All can run dry.

Threaded Side Intake and Threaded Side Discharge

Image of Product. Front orientation. Double Diaphragm Pumps. PTFE Air-Powered Double Diaphragm Pumps for Harsh Chemicals, Threaded Side Intake and Threaded Side Discharge.

Air Motor Pump Repair Kits—Air-motor repair kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.

Fluid Side Pump Repair Kits—Fluid-side repair kits include diaphragms, check valve balls, and seals.

	Double Diaphragm Pumps											Air Motor Pump Repair Kits		Fluid Side Pump Repair Kits
							Overall
	Max. Flow Rate, gpm	Max. Solids Dia.	Air Consumption, ft³/min	Air Connection Size	Intake Size	Discharge Size	Lg.	Wd.	Ht.		Each		Each		Each
231 ft. Maximum Feet of Head—100 psi Maximum Discharge Pressure



		2.5	0.06"	4.8	1/8 Female NPT	1/4 Female NPT	1/4 Female NPT	3 3/8"	5 1/2"	6 1/2"	2925N1	000000000	2666N28	0000000	2666N21	0000000


		6.7	0.08"	9.3	1/8 Female NPT	3/8 Female NPT	3/8 Female NPT	3 1/2"	5 7/8"	7 5/8"	2925N2	00000000	2666N29	000000	2666N22	000000
		16	0.16"	29	1/4 Female NPT	1/2 Female NPT	1/2 Female NPT	6"	9 3/16"	8"	2925N3	00000000	2666N31	000000	2666N23	00000000
		39	0.24"	46	1/4 Female NPT	1 Female NPT	1 Female NPT	8"	10 7/8"	10 3/8"	2925N4	00000000	2666N32	000000	2666N24	00000000

Aluminum Long-Life Air-Powered Drum Pumps for Oil

Use these pumps to move lubricating oil such as hydraulic and motor oil. Also known as diaphragm pumps, they have few moving parts that can fail for a long service life. Install an air line filter/lubricator to ensure efficiency and reduce wear on the pump.

Pump Repair Kits—Repair kits include balls, O-rings, and diaphragms.

Pumps																		Pump Repair Kits
			Temp., ° F							Intake				Discharge
Flow Rate, gpm	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Air Pressure, psi	Air Consumption, ft³/min	For Drum Opening Size	Includes	Air Connection	Connection	Pipe Size	Tube Lg.	Discharge Location	Connection	Pipe Size		Each		Each







			Buna-N Diaphragm

			31	55	8,000	10	180	100	40	2 NPT	Drum Connector	1/4 Female NPT	Threaded	3/4 Female NPT	39"	Pump Body	Threaded	3/4 Female NPT	8281K13	000000000	8281K131	0000000

PVDF Long-Life Air-Powered Drum Pumps for Chemicals

A chemical- and impact-resistant PVDF housing stands up to aggressive chemicals such as methyl ethyl ketone (MEK) and xylene. Also known as diaphragm pumps, they have few moving parts that can fail for a long service life. Install an air line filter/lubricator to ensure efficiency and reduce wear on the pump.

Pump Repair Kits—Repair kits include O-rings, valves, and diaphragms.

Pumps																		Pump Repair Kits
			Temp., ° F							Intake				Discharge
Flow Rate, gpm	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Air Pressure, psi	Air Consumption, ft³/min	For Drum Opening Size	Includes	Air Connection	Connection	Pipe Size	Tube Lg.	Discharge Location	Connection	Pipe Size		Each		Each







			PTFE Diaphragm

			13	55	3,000	40	210	100	12	2 NPT	Drum Connector	1/4 Female NPT	Threaded	1/2 Female NPT	36"	Pump Body	Threaded	1/2 Female NPT	2534K54	000000000	8281K111	0000000

Air-Powered Drum Pumps for Flammable Liquid

These pumps have a motor that is rated for IEC Zone 1, Groups IIB and IIA; and IEC Zone 21, Groups IIIC, IIIB, and IIIA hazardous locations with flammable gases and vapors, so they can be used with liquids such as acetone, ethanol, methyl ethyl ketone (MEK), xylene, and mineral spirits. Motor is nonsparking for use in applications where electricity is unavailable or dangerous. Install an air line filter/lubricator to ensure efficiency and reduce wear on the pump.

Always bond and ground your application for static control. For more information about bonding and grounding, see Sections 1910.106 and 1910.107 of the Federal OSHA Code or see bonding and grounding equipment.

			Temp., ° F							Intake			Discharge (Pump Body)
Flow Rate, gpm	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Air Pressure, psi	Air Consumption, ft³/min	For Drum Opening Size	Includes	Air Connection	Tube OD	Tube Lg.	Discharge Location	Connection	For Tube ID	Gender	Certification	Features		Each



	26	55	1,100	-40	210	44 to 87	53	2 NPT	Drum Connector	3/8 Female NPT	1 5/8"	39"	Pump Body	Barbed	1"	Male	CE Marked	Bonding and Grounding Wires, Hanger	2824K39	000000000


	26	55	1,100	-40	210	44 to 87	53	2 NPT	Drum Connector	3/8 Female NPT	1 5/8"	47"	Pump Body	Barbed	1"	Male	CE Marked	Bonding and Grounding Wires, Hanger	2824K49	00000000
	53	55	1,000	-40	210	44 to 87	53	2 NPT	Drum Connector	3/8 Female NPT	1 5/8"	39"	Pump Body	Barbed	1"	Male	CE Marked	Bonding and Grounding Wires, Hanger	8252K12	00000000
	53	55	1,000	-40	210	44 to 87	53	2 NPT	Drum Connector	3/8 Female NPT	1 5/8"	47"	Pump Body	Barbed	1"	Male	CE Marked	Bonding and Grounding Wires, Hanger	8252K14	00000000

Pump Replacement Parts

Air-Powered Drum Pumps with Hose and Filter/Lubricator for Water, Oil, Coolants, and Chemicals

Image of Product. Front orientation. Contains Annotated. Drum Pumps. Air-Powered Drum Pumps with Hose and Filter/Lubricator for Water, Oil, Coolants, and Chemicals.

A filter/lubricator ensures efficiency and reduces wear on the pump. They have a chemically resistant seal for use with hydraulic oil and motor oil in addition to acidic and alkaline liquids such as ammonia and etching and cleaning solutions. Pumps have a nonsparking motor for use in applications where electricity is unavailable or dangerous.

Pumps																			Pump Repair Kits
			Temp., ° F							Intake			Discharge
Flow Rate, gpm	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Air Pressure, psi	Air Consumption, ft³/min	For Drum Opening Size	Includes	Air Connection	Tube OD	Tube Lg.	Discharge Location	Tube ID	Tube Lg., ft.	Tube Material	Features		Each		Each



	16	55	2,000	-20	150	80 to 100	32	2 NPT	Drum Connector	1/4 Female NPT	1 1/2"	40"	Tube End	1"	5	PVC	15-ft. Air Hose Assembly, Air Filter/Lubricator, Ball Valve, Muffler	8243K21	000000000	8243K62	0000000


	16	55	2,000	35	150	80 to 100	32	2 NPT	Drum Connector	1/4 Female NPT	1 5/8"	40"	Tube End	1"	5	PVC	15-ft. Air Hose Assembly, Air Filter/Lubricator, Ball Valve, Muffler	8243K31	00000000	8243K62	000000
	22	55	330	35	160	80 to 100	32	2 NPT	Drum Connector	1/4 Female NPT	2"	40"	Tube End	1"	5	PVC	15-ft. Air Hose Assembly, Air Filter/Lubricator, Ball Valve, Muffler	4296K41	00000000	———	0
	22	55	330	35	160	80 to 100	32	2 NPT	Drum Connector	1/4 Female NPT	2"	48"	Tube End	1"	5	PVC	15-ft. Air Hose Assembly, Air Filter/Lubricator, Ball Valve, Muffler	4296K48	00000000	———	0

Couplings

		Each
Replacement Inlet Coolant Hose	1333K33	000000
Replacement Inlet Air Hose	1333K35	00000

For Flow Rate, gpm	Component	Material		Each
16, 22	Coupling Insert	Buna-N	8243K64	000000
16	Half Coupling	Aluminum	8243K69	00000