A resistance temperature detector (RTD) probe responds to temperature change faster than dial thermometers.

Monitor the temperature of difficult-to-access system components from a distance.

Protect temperature-sensitive materials in refrigerators and freezers with one of these thermometers that sound an alarm and flash the display when temperature rises above your activation point.

For mounting on instrument and control panels, these thermometers have a back flange.

In addition to a pointer that shows the current temperature, these thermometers have a second pointer that indicates the highest or lowest temperature reached.

For installation in tight spaces, these thermometers have a side connection and face upright for easy viewing.

An extra-long stem extends into deep tanks and hard-to-reach areas.

The detachable brass thermowell covers the thermometer stem to protect it from vibration, corrosion, shock, and pressure.

Dry dials with acrylic lenses eliminate the risk of contamination in case of breakage, so these thermometers are often used in food-processing applications.

The included calibration certificate traceable to NIST states that these thermometers have passed a test for accuracy, and the silicone-filled dial keeps the pointer from fluttering in high-vibration environments.

Monitor the temperature of corrosive fluids in harsh conditions.

Check the surface temperature of tanks, generators, annealing ovens, boilers, and other metallic equipment.

In addition to showing current surface temperature, these thermometers have pointers to indicate the minimum and maximum temperatures since the last reading.

Monitor temperature in freezers, coolers, and storage areas with this thermometer that meets NSF/ANSI standards for food equipment.

For a longer service life than thermocouple probes and more consistent readings over time, these thermometers have a resistance temperature detector (RTD) probe. They come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy.

A remote probe extends your reach in hard-to-access areas. These thermometers come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy.

Prevent broken glass and leaking fluid from contaminating your process. These glass thermometers have an FEP coating that absorbs shock and contains glass and liquid for easy cleanup in case of breakage.

The nickel-plated brass housing protects these glass thermometers from cracking or shattering when dropped or bumped.

Store up to 500 readings on these thermometers and determine temperature within ±0.75° F accuracy.

For use in food-processing applications, this thermometer meets NSF/ANSI standards and includes a thermocouple probe with a pointed tip to pierce dense meats and frozen foods.

Instead of a dial, these thermometers have an easy-to-read LCD.

Clip this compact thermometer to your belt loop or keys for temperature readings on the go. It comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy.

Fold the probe into the thermometer handle to prevent wear and damage during storage.

For easier viewing than dial thermometers for food and beverage, these thermometers show readings on an LCD. All meet standards for use in food-processing environments.

The luminescent dial face provides clear temperature readings in low-light conditions.

Tuck these thermometers into your pocket for on-the-go readings.

Take temperature readings in washdown conditions and outdoor environments.

Measure the temperature of dangerous, hard-to-reach, and moving surfaces without risking electrical shock or contamination.

To confirm the accuracy of noncontact temperature readings of dangerous and inaccessible surfaces, these thermometers come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy.

Quickly take people’s temperatures as they enter your facility to screen out anyone with a high reading.

Often used to measure temperature in water lines and low-pressure steam lines, these RTDs have an NPT male probe connection for easy installation in pipes, tanks, and thermowells.

For a long service life in harsh conditions, this RTD probe has an armored stainless steel cable to protect wiring from corrosion, abrasion, and impact.

To protect the probe from vibration, corrosion, and shock, these RTD probes come with a thermowell.

Use these RTD probes for more stable air-temperature readings than thermocouple probes.

Designed for clean-in-place applications such as dairy processing and food-preparation areas, these 3-A certified RTDs have a sanitary quick-clamp probe connection for easy removal.

Use these converters to change RTD probe signals to a 4-20 mA signal for compatibility with switches and controllers.

Connect RTD wire leads to conduit or instrumentation.

Measure the relative humidity and temperature of indoor spaces.

Determine relative humidity within ±1.5% accuracy and temperature within ±0.8° F accuracy. This meter comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy.

The probe is attached to a 3-ft. cable for checking humidity, temperature, and dew point in hard-to-reach areas.

Slip these meters in a pocket or clip them to a belt to take on-site humidity and temperature readings.

To ensure reliable readings on the go, this portable meter comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy.

About half the size of standard temperature chart recorders, these are often used to monitor temperature inside refrigerators, incubators, storage compartments, and other small spaces.

Record temperature in hard-to-access areas. This recorder has a remote probe on a 15-ft. cable.

To alert you of temperature fluctuations, this recorder sounds an alarm and flashes the display when temperature rises above or falls below the programmable temperature range. It has a probe on a 4-ft. cable for taking readings in hard-to-access areas.

Monitor temperature and pressure in hard-to-access system components with this data recorder that has remote sensors that track and store readings for upload to a PC.

Record incremental temperature changes.

See at a glance whether inventory has been exposed to high temperatures during shipping and storage.

Apply multiple temperature markings to workpieces, pipes, and equipment to visually identify a wide range of temperature changes.

Painted directly on your surface, this liquid melts when it heats to the temperature point.

The probe tips come attached to mounting connections for fast installation.

Protect thermocouple wiring from wear and corrosion with an armored stainless steel cable.

Monitor the temperature of hazardous, sensitive, and hard-to-reach surfaces without touching them.

The included thermowell protects the probe from vibration, corrosion, and shock in tanks and pipelines.

For easy installation in thermowells, tanks, pipes, and other closed vessels, these thermocouples have an NPT male probe connection.

To monitor the internal temperature of soft solids in humid conditions and harsh environments, these thermocouple probes have an armored stainless steel cable that protects wiring from corrosion and damage.

An armored stainless steel cable protects wiring from corrosion and damage in humid conditions and harsh environments.

Thick wire with ceramic insulation stands up to extreme air temperatures in forging, die casting, and heat treating.

Convert thermocouple probe signals to a 4-20 mA signal for use with switches and controllers.

Also known as feedthrough connectors, these mount through threaded tank openings to make connections between thermocouple probes and external equipment.

A built-in temperature sensor and a remote-reading probe simultaneously monitor indoor and outdoor temperature.

Take field measurements of temperature, dew point, heat index, wind chill, wind speed, and relative humidity.

Check temperature, relative humidity, atmospheric pressure, and time with one barometer.

When long life with little maintenance is critical, rely on the same rugged weather equipment used by the National Weather Service. For a complete weather station, you'll need at least one sensor, a sensor cable, and either the Weather Data Center Display or one of the Real-Time Displays.