Tool Lanyards
Tether your tools to prevent accidental drops that could injure people and damage equipment below. These lanyards meet ANSI/ISEA 121 for design and performance to ensure safety when working at height. To properly tether your tool, you’ll need an attachment point on your tool and an anchor point for your lanyard.
Lanyards for hand tools are the standard option—they can be used on most tools in your toolbox. Lanyards for power tools wrap around the battery and base to hold the tool securely. Lanyards for tape measures wrap securely around all four sides while leaving the tape accessible.
Straight lanyards have elastic in the webbing that stretches a little as you use your tool for ease of movement. Coiled lanyards stretch to their full length and then return to their retracted length when you let go to prevent snags and tangles.
Wire rope lanyards are more abrasion resistant than webbing lanyards. A rubber coating protects the stainless steel wire rope from corrosion.
Lanyards with a detachable elastic loop let you swap out tools while leaving the anchor and lanyard setup in place.
| Connection Type | For No. of Tools | Capacity, lbs. | Lg. | Retracted Lg. | Extended Lg. | Coating Material | Material | For Min. Tool Opening | Carabiner Material | Features | Specifications Met | Each | |
Straight—Webbing | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Carabiner × Elastic Loop | 1 | 10 | 35" | __ | __ | __ | Nylon | 3/8" | Aluminum | Cord Lock | ANSI/ISEA 121 | 0000000 | 000000 |
| Carabiner × Detachable Elastic Loop | 1 | 5 | 38" | __ | __ | __ | Nylon | 3/8" | Aluminum | Cord Lock | ANSI/ISEA 121 | 0000000 | 00000 |
| Carabiner × Carabiner | 1 | 10 | 35" | __ | __ | __ | Nylon | 1/4" | Aluminum | __ | ANSI/ISEA 121 | 0000000 | 00000 |
| Carabiner × Carabiner × Carabiner | 2 | 15 | 35" | __ | __ | __ | Nylon | 1/4" | Stainless Steel | __ | ANSI/ISEA 121 | 0000000 | 00000 |
Coiled—Wire Rope | |||||||||||||
| Carabiner × Carabiner | 1 | 5 | __ | 7" | 48" | Polyurethane Rubber | Stainless Steel | 1/4" | Stainless Steel | __ | ANSI/ISEA 121 | 0000000 | 00000 |
Coiled—Webbing | |||||||||||||
| Carabiner × Webbing Loop | 1 | 25 | __ | 42" | 109" | __ | Nylon | 3/8" | Stainless Steel | __ | ANSI/ISEA 121 | 0000000 | 00000 |
| Carabiner × Carabiner | 1 | 25 | __ | 55" | 112" | __ | Nylon | 3/8" | Stainless Steel | __ | ANSI/ISEA 121 | 0000000 | 00000 |
| Replacement Detachable Elastic Loops (Pkg. of 3) | 0000000 | Pkg. | 00000 |
| Connection Type | For No. of Tools | Capacity, lbs. | Lg. | Material | For Min. Tool Opening | Carabiner Material | Specifications Met | Each | |
Straight—Webbing | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Carabiner × Webbing Loop | 1 | 10 | 38" | Nylon | 7/16" | Aluminum | ANSI/ISEA 121 | 0000000 | 000000 |
| Connection Type | For No. of Tools | Capacity, lbs. | Lg. | Material | For Min. Tool Opening | Carabiner Material | Specifications Met | Each | |
Straight—Webbing | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Carabiner × Webbing Loop | 1 | 2 | 38" | Nylon | 7/16" | Aluminum | ANSI/ISEA 121 | 0000000 | 000000 |
Wrist Tool Lanyards
Tethered to your wrist, your tools will always be within reach. When working at height, these lanyards prevent accidental drops that could harm people and damage equipment below. They meet ANSI/ISEA 121 for design and performance to ensure safety. To properly tether your tool, you’ll need an attachment point on your tool.
Lanyards with a detachable elastic loop let you quickly disconnect tools from the wristband—no need to undo the loop. Add more detachable loops (sold separately) so you can have other tools ready to snap in.
Lanyards | Replacement Detachable Elastic Loops | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Connection Type | For No. of Tools | Capacity, lbs. | Lg. | Retracted Lg. | Extended Lg. | Material | Construction | For Min. Tool Opening | For Max. Wrist Circumference | Carabiner Material | Features | Specifications Met | Each | Pkg. Qty. | Pkg. | ||
| Wristband × Elastic Loop | 1 | 5 | 10" | __ | __ | Nylon | Rope | 7/64" | 10 1/4" | __ | Cord Lock | ANSI/ISEA 121 | 0000000 | 00000 | __ | 000000 | 00 |
| Wristband × Detachable Elastic Loop | 1 | 5 | 10" | __ | __ | Nylon | Rope | 3/16" | 10 1/4" | __ | Cord Lock | ANSI/ISEA 121 | 0000000 | 00000 | 3 | 0000000 | 000000 |
| Wristband × Retractable Detachable Elastic Loop | 1 | 1 | __ | 8 1/2" | 46" | Nylon | Rope | 9/32" | 10 1/4" | __ | Cord Lock | ANSI/ISEA 121 | 0000000 | 00000 | 3 | 0000000 | 00000 |
| Wristband × Carabiner | 1 | 5 | 7" | __ | __ | Nylon | Webbing | 1/2" | 10" | Aluminum | __ | ANSI/ISEA 121 | 0000000 | 00000 | __ | 000000 | 00 |
Tool-Holding Heat-Shrink Attachments
Also known as tether loops, these have a heat-shrink sleeve for gripping your tool and a D-ring for attaching to a tool lanyard (not included). Slip the sleeve over your tool and apply heat with a heat gun until the sleeve grips tightly. To ensure the loop won’t slip off, the ends of the tool must be wider than where the loop will rest.
| For Tool Dia. | ID Before Shrinking | Sleeve Lg. | Ring Inside Wd. | Ring Inside Lg. | Capacity | Each | |
| 0.25"-0.5" | 0.75" | 1 3/4" | 0.56" | 0.47" | 4 lbs. | 0000000 | 00000 |
| 0.36"-0.75" | 1.1" | 1 3/4" | 0.56" | 0.47" | 5 lbs. | 0000000 | 0000 |
| 0.55"-1.25" | 1.5" | 2" | 1.02" | 0.86" | 10 lbs. | 0000000 | 0000 |
| 0.75"-1.75" | 2" | 2" | 1.02" | 0.86" | 15 lbs. | 0000000 | 0000 |
| 0.75"-1.75" | 2" | 4" | 1.56" | 1.05" | 25 lbs. | 0000000 | 00000 |
| 1.5"-2.5" | 2.75" | 2" | 1.56" | 1.05" | 20 lbs. | 0000000 | 00000 |
Tool Tethering Kits
Everything you need to keep tools close to you while you work at height. These kits prevent tools from accidentally falling and hurting someone or damaging equipment below. The components in these kits meet ANSI/ISEA 121 design and performance safety standards. To tether your tools properly, combine a tool attachment point with a lanyard and secure it to an anchor point.
| No. of Pieces | Includes | Specifications Met | Each | |
| 24 | Six Webbing Tool Attachment Points Six Wire Tool Attachment Points Three Elastic Tool Attachment Points Two Coiled Tool Lanyards—Carabiner × Loop Straight Tool Lanyard—Carabiner × Loop Straight Tool Lanyard—Carabiner × Carabiner Two Rolls of Tool Tape Tape Measure Holder Power Tool Holder Glove Clip | ANSI/ISEA 121 | 0000000 | 0000000 |
Tool Tethering Anchor Points
Extra-Wide
D-Ring
Clip your tool’s lanyard to these anchors while working at height—they prevent tools from falling and hurting someone or damaging equipment below. To ensure safety, they meet ANSI/ISEA 121 for design and performance. You’ll need an attachment point on your tool and a lanyard to properly tether your tool.
Slide-on anchor points attach to your harness or tool belt. They’re a good choice for anchoring hand tools.
Wraparound anchor points attach to rated structures such as railings and scaffolding. They support heavy tools without weighing you down. Wraparound anchor points with an extra-wide D-ring work well when you need to swap between multiple tools. You can attach up to five tool lanyards. A nylon cover protects the webbing from rubbing and scraping for an extended lifespan.
| Capacity, lbs. | For No. of Tools | Connection Type | Material | Cover Material | Construction | For Max. Dia. | Specifications Met | Each | |
Slide On | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 15 | 1 | D-Ring | Nylon | __ | Webbing | 2 1/2" | ANSI/ISEA 121 | 0000000 | 00000 |
Wraparound | |||||||||
| 25 | 1 | D-Ring | Polyester | __ | Webbing | 6" | ANSI/ISEA 121 | 0000000 | 0000 |
Wraparound with Extra-Wide D-Ring | |||||||||
| 50 | 5 | D-Ring | Nylon | Nylon | Webbing | 6" | ANSI/ISEA 121 | 0000000 | 00000 |