Capacity per Caster Capacity per Caster |
---|
|
Mount Height Mount Height |
---|

For Surface Type For Surface Type |
---|
|
|
Mounting Plate Length Mounting Plate Length |
---|

|
|
|
Frame Material Frame Material |
---|
|
Wheel Type Wheel Type |
---|
![]() | ![]() |
Solid | Tread on Core |
Adjustment Style Adjustment Style |
---|
|
Performance Properties Performance Properties |
---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
About Casters and Wheels
More
Leveling Plate Casters





Use screws or bolts to attach the mounting plate on these casters to a flat surface. Adjust the leveling pad to keep your equipment stationary and compensate for uneven floors.
Nylon wheels are impact- and wear-resistant. They work well on smooth surfaces. Polyurethane wheels combine the abrasion resistance of plastic with the shock-absorbing qualities of rubber. Their aluminum core adds strength to the wheel without sacrificing cushioning. Use them on smooth or rough floors and in areas with debris.
Casters with 304 stainless steel frame offer good corrosion resistance.
Ball bearings provide smooth swiveling. Double-ball bearings swivel more smoothly than ball bearings.
Kingpinless swivel construction distributes impact better than standard kingpin casters, enabling smooth swiveling and extending service life.
Turn the thumbwheel to lower or raise the leveling pad. Ratchet pulls out for easy adjustment and retracts out of the way when not in use. Nut adjustment requires a wrench to move the leveling pad.
For technical drawings and 3-D models, click on a part number.
Wheel | Adjustment | Mounting Plate | Screw | Frame | Swivel | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Style | Nut Thread Size | Lg. | Wd. | For Screw Size | Size | Lg. | Mounting Fasteners Included | Material | Color | Swivel Construction | Swivel Bearing Type | Each | |
Black Solid Nylon Plastic Wheels—Hard | |||||||||||||||||
1 5/8" | 3/4" | 2 13/16"-3 3/16" | 50 | Thumbwheel | __ | 2 1/8" | 2 1/8" | 1/4" | __ | __ | No | Powder-Coated Aluminum | Black | Kingpin | Double Ball | 0000000 | 000000 |
1 5/8" | 3/4" | 2 13/16"-3 3/16" | 50 | Thumbwheel | __ | 2 1/8" | 2 1/8" | 1/4" | __ | __ | No | Powder-Coated Aluminum | Ivory | Kingpin | Double Ball | 0000000 | 00000 |
Nonmarking Black Solid Nylon Plastic Wheels—Hard | |||||||||||||||||
2" | 1" | 3 1/4"-3 5/8" | 270 | Thumbwheel | __ | 2 7/8" | 2 7/8" | __ | M6 | 9/16" | Yes | Powder-Coated Aluminum | Black | Kingpin | Double Ball | 00000000 | 00000 |
2" | 1" | 3 1/4"-3 5/8" | 270 | Ratchet | __ | 2 7/8" | 2 7/8" | __ | M6 | 9/16" | Yes | Powder-Coated Aluminum | Black | Kingpin | Double Ball | 00000000 | 00000 |
2" | 1" | 3 1/4"-3 5/8" | 550 | Thumbwheel | __ | 3 3/4" | 2 1/2" | __ | M8 | 1" | Yes | Powder-Coated Aluminum | Ivory | Kingpin | Double Ball | 00000000 | 00000 |
2" | 1" | 3 1/4"-3 5/8" | 550 | Ratchet | __ | 3 3/4" | 2 1/2" | __ | M8 | 1" | Yes | Powder-Coated Aluminum | Ivory | Kingpin | Double Ball | 00000000 | 00000 |
2" | 1" | 3 5/16"-3 11/16" | 300 | Thumbwheel | __ | 2 7/8" | 2 7/8" | __ | M6 | 13/16" | Yes | Powder-Coated Aluminum | Ivory | Kingpinless | Ball | 00000000 | 00000 |
2" | 1" | 3 5/16"-3 11/16" | 300 | Ratchet | __ | 2 7/8" | 2 7/8" | __ | M6 | 13/16" | Yes | Powder-Coated Aluminum | Ivory | Kingpinless | Ball | 00000000 | 00000 |
2" | 1" | 3 5/16"-3 11/16" | 550 | Thumbwheel | __ | 2 7/8" | 2 7/8" | __ | M6 | 13/16" | Yes | 304 Stainless Steel | __ | Kingpinless | Ball | 00000000 | 000000 |
2" | 1" | 3 5/16"-3 11/16" | 550 | Ratchet | __ | 2 7/8" | 2 7/8" | __ | M6 | 13/16" | Yes | 304 Stainless Steel | __ | Kingpinless | Ball | 00000000 | 000000 |
2 1/2" | 1 1/8" | 4 1/8"-4 11/16" | 880 | Thumbwheel | __ | 3 9/16" | 3 9/16" | __ | M8 | 1" | Yes | 304 Stainless Steel | __ | Kingpinless | Ball | 0000000 | 000000 |
2 1/2" | 1 1/8" | 4 1/8"-4 11/16" | 880 | Ratchet | __ | 3 9/16" | 3 9/16" | __ | M8 | 1" | Yes | 304 Stainless Steel | __ | Kingpinless | Ball | 0000000 | 000000 |
2 1/2" | 1 3/16" | 4 1/32"-4 5/8" | 550 | Thumbwheel | __ | 3 9/16" | 3 9/16" | __ | M8 | 13/16" | Yes | Powder-Coated Aluminum | Black | Kingpin | Double Ball | 00000000 | 00000 |
2 1/2" | 1 3/16" | 4 1/32"-4 5/8" | 550 | Ratchet | __ | 3 9/16" | 3 9/16" | __ | M8 | 13/16" | Yes | Powder-Coated Aluminum | Black | Kingpin | Double Ball | 00000000 | 00000 |
2 1/2" | 1 3/16" | 4 3/32"-4 11/16" | 600 | Thumbwheel | __ | 3 9/16" | 3 9/16" | __ | M8 | 13/16" | Yes | Powder-Coated Aluminum | Ivory | Kingpinless | Ball | 00000000 | 00000 |
2 1/2" | 1 3/16" | 4 3/32"-4 11/16" | 600 | Ratchet | __ | 3 9/16" | 3 9/16" | __ | M8 | 1" | Yes | Powder-Coated Aluminum | Ivory | Kingpinless | Ball | 00000000 | 00000 |
2 7/8" | 1 3/16" | 4 3/4"-5 3/16" | 820 | Thumbwheel | __ | 3 3/4" | 3 3/4" | __ | M10 | 1" | Yes | Powder-Coated Aluminum | Ivory | Kingpinless | Ball | 0000000 | 00000 |
2 7/8" | 1 3/16" | 4 3/4"-5 3/16" | 1,100 | Nut | M16 | 3 3/4" | 3 3/4" | __ | M10 | 1" | Yes | Powder-Coated Aluminum | Ivory | Kingpinless | Ball | 0000000 | 00000 |
2 15/16" | 1 3/16" | 4 3/4"-5 3/16" | 1,650 | Thumbwheel | __ | 4 1/2" | 4" | __ | M10 | 1" | Yes | Powder-Coated Aluminum | Ivory | Kingpin | Double Ball | 00000000 | 00000 |
2 15/16" | 1 3/16" | 4 3/4"-5 3/16" | 2,200 | Nut | M24 | 4 1/2" | 4" | __ | M10 | 1" | Yes | Powder-Coated Aluminum | Ivory | Kingpin | Double Ball | 00000000 | 000000 |
3" | 1 3/16" | 4 3/4"-5 1/4" | 820 | Thumbwheel | __ | 3 3/4" | 3 3/4" | __ | M10 | 13/16" | Yes | Powder-Coated Aluminum | Black | Kingpin | Double Ball | 0000000 | 00000 |
3" | 1 3/16" | 4 3/4"-5 1/4" | 1,100 | Nut | M16 | 3 3/4" | 3 3/4" | __ | M10 | 13/16" | Yes | Powder-Coated Aluminum | Black | Kingpin | Double Ball | 0000000 | 000000 |
Nonmarking Blue Solid Nylon Plastic Wheels—Hard | |||||||||||||||||
3 1/2" | 2 3/16" | 5 3/16"-5 13/16" | 1,600 | Nut | M20 | 4" | 4" | __ | M12 | 1 9/16" | Yes | Powder-Coated Aluminum | Black | Kingpin | Double Ball | 0000000 | 000000 |
3 7/8" | 2 1/16" | 5 3/16"-5 3/4" | 1,600 | Nut | M20 | 4" | 4" | __ | M12 | 1 9/16" | Yes | Powder-Coated Aluminum | Ivory | Kingpinless | Ball | 0000000 | 000000 |
Nonmarking White Tread-on-Core Polyurethane Rubber Wheels—Hard | |||||||||||||||||
2" | 1" | 3 1/4"-3 5/8" | 550 | Thumbwheel | __ | 2 7/8" | 2 7/8" | __ | M6 | 9/16" | Yes | Powder-Coated Aluminum | Ivory | Kingpin | Double Ball | 00000000 | 000000 |
2" | 1" | 3 1/4"-3 5/8" | 550 | Thumbwheel | __ | 3 3/4" | 2 1/2" | __ | M8 | 1" | Yes | Powder-Coated Aluminum | Ivory | Kingpin | Double Ball | 00000000 | 000000 |
2" | 1" | 3 1/4"-3 5/8" | 550 | Ratchet | __ | 2 7/8" | 2 7/8" | __ | M6 | 9/16" | Yes | Powder-Coated Aluminum | Ivory | Kingpin | Double Ball | 00000000 | 000000 |
2" | 1" | 3 1/4"-3 5/8" | 550 | Ratchet | __ | 3 3/4" | 2 1/2" | __ | M8 | 1" | Yes | Powder-Coated Aluminum | Ivory | Kingpin | Double Ball | 00000000 | 000000 |
2 1/2" | 1 1/8" | 4 1/16"-4 5/8" | 1,100 | Thumbwheel | __ | 3 9/16" | 3 9/16" | __ | M8 | 13/16" | Yes | Powder-Coated Aluminum | Ivory | Kingpin | Double Ball | 0000000 | 000000 |
2 1/2" | 1 1/8" | 4 1/16"-4 5/8" | 1,100 | Ratchet | __ | 3 9/16" | 3 9/16" | __ | M8 | 13/16" | Yes | Powder-Coated Aluminum | Ivory | Kingpin | Double Ball | 00000000 | 000000 |
2 15/16" | 1 3/16" | 4 3/4"-5 3/16" | 1,650 | Thumbwheel | __ | 3 3/4" | 3 3/4" | __ | M10 | 13/16" | Yes | Powder-Coated Aluminum | Ivory | Kingpin | Double Ball | 00000000 | 000000 |
2 15/16" | 1 3/16" | 4 3/4"-5 3/16" | 1,650 | Thumbwheel | __ | 4 1/2" | 4" | __ | M10 | 1" | Yes | Powder-Coated Aluminum | Ivory | Kingpin | Double Ball | 00000000 | 000000 |
Threaded-Stem Leveling Casters





Install these casters into a threaded hole and adjust the leveling pad to keep your equipment stationary and compensate for uneven floors. Wheels ride directly on the axle rather than on bearings, making them an economical choice for equipment not frequently moved. Casters have double-ball swivel bearings for the smoothest swiveling.
Nylon wheels are impact and wear resistant. They work well on smooth surfaces. Polyurethane wheels combine the abrasion resistance of plastic and the vibration absorption of rubber. Use them on smooth or rough floors and in areas with debris.
Turn the thumbwheel to lower or raise the leveling pad. Ratchet pulls out for easy adjustment and retracts out of the way when not in use. Nut adjustment requires a wrench to move the leveling pad.
Shielded bearings protect from dust and debris.
For technical drawings and 3-D models, click on a part number.
Wheel | Adjustment | Frame | Swivel | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Hardness | Stem Lg. | Style | Nut Thread Size | Swivel Bearing Seal Type | Material | Choose a Color | Each | |
3/8"-16 Thread Size | ||||||||||||
Nonmarking Black Solid Nylon Plastic Wheels—Hard | ||||||||||||
1 3/4" | 11/16" | 2 13/16"-3 3/16" | 60 | Durometer 90D | 3/4" | Thumbwheel | __ | Shielded | Powder-Coated Aluminum | Ivory | 0000000 | 000000 |
1 3/4" | 11/16" | 2 13/16"-3 3/16" | 110 | Durometer 90D | 3/4" | Thumbwheel | __ | Shielded | 304 Stainless Steel | __ | 0000000 | 000000 |
1/2"-13 Thread Size | ||||||||||||
Nonmarking Black Solid Nylon Plastic Wheels—Hard | ||||||||||||
2" | 1" | 3 1/4"-3 5/8" | 550 | Durometer 70D | 1 1/4" | Ratchet | __ | Open | Powder-Coated Aluminum | Ivory | 0000000 | 00000 |
2" | 1" | 3 5/16"-3 11/16" | 300 | Durometer 90D | __ | Thumbwheel | __ | __ | Powder-Coated Aluminum | 0000000 | 00000 | |
2" | 1" | 3 5/16"-3 11/16" | 550 | Durometer 90D | 1 1/4" | Thumbwheel | __ | Shielded | 304 Stainless Steel | __ | 0000000 | 000000 |
2 1/2" | 1 1/8" | 4 1/16"-4 5/8" | 1,100 | Durometer 70D | 1 1/4" | Ratchet | __ | Open | Powder-Coated Aluminum | Ivory | 0000000 | 00000 |
2 1/2" | 1 3/16" | 4 1/8"-4 5/8" | 600 | Durometer 90D | __ | Thumbwheel | __ | __ | Powder-Coated Aluminum | 0000000 | 00000 | |
Nonmarking White Tread-on-Core Polyurethane Rubber Wheels—Hard | ||||||||||||
2" | 1" | 3 1/4"-3 5/8" | 550 | Durometer 70D | 1 1/4" | Ratchet | __ | Open | Powder-Coated Aluminum | Ivory | 00000000 | 000000 |
2" | 1" | 3 1/4"-3 5/8" | 550 | Durometer 70D | 1 1/4" | Thumbwheel | __ | Open | Powder-Coated Aluminum | Ivory | 0000000 | 00000 |
2 1/2" | 1 1/8" | 4 1/16"-4 5/8" | 1,100 | Durometer 70D | 1 3/16" | Ratchet | __ | Open | Powder-Coated Aluminum | Ivory | 0000000 | 000000 |
2 1/2" | 1 1/8" | 4 1/16"-4 5/8" | 1,100 | Durometer 70D | 1 1/4" | Thumbwheel | __ | Open | Powder-Coated Aluminum | Ivory | 0000000 | 000000 |
5/8"-11 Thread Size | ||||||||||||
Nonmarking Black Solid Nylon Plastic Wheels—Hard | ||||||||||||
2 7/8" | 1 3/16" | 4 3/4"-5 3/16" | 820 | Durometer 90D | 1 1/4" | Thumbwheel | __ | Shielded | Powder-Coated Aluminum | Ivory | 0000000 | 00000 |
2 7/8" | 1 3/16" | 4 3/4"-5 1/2" | 1,100 | Durometer 90D | 1 1/4" | Nut | M16 | Shielded | Powder-Coated Aluminum | Ivory | 0000000 | 00000 |
Nonmarking White Tread-on-Core Polyurethane Rubber Wheels—Hard | ||||||||||||
2 15/16" | 1 3/16" | 4 3/4"-5 3/16" | 1,650 | Durometer 70D | 1 1/4" | Thumbwheel | __ | Open | Powder-Coated Aluminum | Ivory | 0000000 | 000000 |
M8 Thread Size | ||||||||||||
Nonmarking Black Solid Nylon Plastic Wheels—Hard | ||||||||||||
1 3/4" | 3/4" | 2 13/16"-3 3/16" | 60 | Durometer 90D | 3/4" | Thumbwheel | __ | Shielded | Powder-Coated Aluminum | Ivory | 0000000 | 00000 |
M12 Thread Size | ||||||||||||
Nonmarking Black Solid Nylon Plastic Wheels—Hard | ||||||||||||
2" | 1" | 3 1/4"-3 5/8" | 550 | Durometer 70D | 1 3/16" | Ratchet | __ | Open | Powder-Coated Aluminum | Ivory | 0000000 | 00000 |
2" | 1" | 3 5/16"-3 11/16" | 300 | Durometer 90D | __ | Thumbwheel | __ | __ | Powder-Coated Aluminum | 0000000 | 00000 | |
2 1/2" | 1 1/8" | 4 1/16"-4 5/8" | 1,100 | Durometer 70D | 1 3/16" | Ratchet | __ | Open | Powder-Coated Aluminum | Ivory | 0000000 | 00000 |
2 1/2" | 1 3/16" | 4 1/8"-4 5/8" | 600 | Durometer 90D | __ | Thumbwheel | __ | __ | Powder-Coated Aluminum | 0000000 | 00000 | |
Nonmarking White Tread-on-Core Polyurethane Rubber Wheels—Hard | ||||||||||||
2" | 1" | 3 1/4"-3 5/8" | 550 | Durometer 70D | 1 3/16" | Thumbwheel | __ | Open | Powder-Coated Aluminum | Ivory | 00000000 | 000000 |
2" | 1" | 3 1/4"-3 5/8" | 550 | Durometer 70D | 1 1/4" | Ratchet | __ | Open | Powder-Coated Aluminum | Ivory | 00000000 | 000000 |
2 1/2" | 1 1/8" | 4 1/16"-4 5/8" | 1,100 | Durometer 70D | 1 3/16" | Ratchet | __ | Open | Powder-Coated Aluminum | Ivory | 0000000 | 000000 |
2 1/2" | 1 1/8" | 4 1/16"-4 5/8" | 1,100 | Durometer 70D | 1 3/16" | Thumbwheel | __ | Open | Powder-Coated Aluminum | Ivory | 0000000 | 000000 |
M16 Thread Size | ||||||||||||
Nonmarking Black Solid Nylon Plastic Wheels—Hard | ||||||||||||
2 7/8" | 1 3/16" | 4 3/4"-5 3/16" | 820 | Durometer 90D | 1 1/4" | Thumbwheel | __ | Shielded | Powder-Coated Aluminum | Ivory | 0000000 | 00000 |
2 7/8" | 1 3/16" | 4 3/4"-5 1/2" | 1,100 | Durometer 90D | 1 1/4" | Nut | M16 | Shielded | Powder-Coated Aluminum | Ivory | 0000000 | 00000 |
Nonmarking White Tread-on-Core Polyurethane Rubber Wheels—Hard | ||||||||||||
2 15/16" | 1 3/16" | 4 3/4"-5 3/16" | 1,650 | Durometer 70D | 1 9/16" | Thumbwheel | __ | Open | Powder-Coated Aluminum | Ivory | 0000000 | 000000 |
Easy-Turn Leveling Plate Casters


The dual-wheel design of these casters provides better load distribution and easier turning than other leveling casters. Turn the nut to adjust the leveling pad to keep your equipment stationary and compensate for uneven floors. Casters have sealed double-ball bearings for the smoothest swiveling and protection from dust and debris.
Phenolic wheels are nonmarking and perform well at high temperatures. They roll best on smooth surfaces. Polyurethane wheels combine the abrasion resistance of plastic with the shock-absorbing qualities of rubber. Use them on smooth or rough floors and in areas with debris.
Wheels with sealed ball bearings are smooth rolling and have the best protection against dust and debris.
For technical drawings and 3-D models, click on a part number.
Wheel | Adjustment | Mounting Plate | Mounting Hole Ctr.-to-Ctr. | Wheel Bearing | Swivel | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Hardness | Style | Nut Thread Size | Lg. | Wd. | Lg. | Wd. | For Screw Size | Type | Seal Type | Frame Material | Each | |
Nonmarking Black Solid Phenolic Plastic Wheels—Hard | ||||||||||||||||
2 1/2" | 1" | 3 3/8"-4 3/8" | 500 | Durometer 95D | Nut | 1/2"-13 | 3" | 3" | 2 3/8" | 2 3/8" | 5/16" | Without Bearing | __ | 301 Stainless Steel | 0000000 | 0000000 |
3" | 1 1/4" | 4 1/8"-5 1/8" | 800 | Durometer 95D | Nut | 5/8"-11 | 3 7/8" | 3 7/8" | 3" | 3" | 3/8" | Without Bearing | __ | 301 Stainless Steel | 0000000 | 000000 |
Nonmarking Blue Solid Polyurethane Rubber Wheels—Hard | ||||||||||||||||
2 1/2" | 1" | 3 3/8"-4 3/8" | 500 | Durometer 75D | Nut | 1/2"-13 | 3" | 3" | 2 3/8" | 2 3/8" | 5/16" | Ball | Sealed | 301 Stainless Steel | 0000000 | 000000 |
3" | 1 1/4" | 4 1/8"-5 1/8" | 1,000 | Durometer 75D | Nut | 5/8"-11 | 3 7/8" | 3 7/8" | 3" | 3" | 3/8" | Ball | Sealed | 301 Stainless Steel | 0000000 | 000000 |
Edge-Mount Bracket Casters

Mount these casters to the bottom edge of equipment to keep them out of sight. They have a lightweight polypropylene wheel that rides directly on the axle making these casters an economical option for equipment on smooth surfaces that is not frequently moved.
For technical drawings and 3-D models, click on a part number.
Wheel | Mounting Plate | Rigid | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Hardness | No. of Mounting Holes | Lg. | Wd. | Dp. | Mounting Hole Ctr.-to-Ctr. Wd. | For Screw Size | Frame Material | Each | |
Nonmarking Black Solid Polypropylene Plastic Wheels—Hard | |||||||||||||
2" | 7/8" | 1/2" | 100 | Durometer 70D | 3 | 1 3/4" | 2 1/4" | 0.625" | 1 13/16" | 1/8" | Zinc-Plated Steel | 0000000 | 00000 |
Side-Mount Bracket Casters




Mount these casters to the side of equipment or on gates and doors. They are spring-loaded for good shock absorption.
Tread-on-core wheels have a polypropylene core that is harder than the tread, balancing strength with cushioning.
Rubber wheels provide good traction on rough surfaces. Polyurethane wheels combine the abrasion resistance of plastic with the cushioning qualities of rubber. They can be used on smooth and rough floors and in areas with debris.
Sleeve wheel bearings prevent wear to the wheel bore but don't roll as easily as other bearings. Roller wheel bearings provide smoother rolling than sleeve bearings. Ball wheel bearings are the easiest to roll.
Casters have double-ball swivel bearings for the smoothest swiveling.
For technical drawings and 3-D models, click on a part number.
Wheel | Mounting Plate | Wheel Bearing | Swivel | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | No. of Mount. Holes | Lg. | Wd. | For Screw Size | Max. Compression Force, lbs. | Deflection @ Max. Cap. | Type | Seal Type | Frame Material | Each | |
Black Solid Rubber Wheels—Soft | |||||||||||||||
A | 3" | 13/16" | 3 7/8" | 70 | 2 | 3 5/8" | 1" | 5/16" | 25 | 2" | Sleeve | Open | Zinc-Plated Steel | 00000000 | 000000 |
Nonmarking Gray Tread-on-Core Rubber Wheels—Soft | |||||||||||||||
B | 2" | 11/16" | 2 11/16" | 80 | 6 | 2 3/8" | 2" | 3/16" | 35 | 7/8" | Ball | Open | Zinc-Plated Steel | 00000000 | 00000 |
Black Solid Rubber Wheels—Firm | |||||||||||||||
A | 3" | 13/16" | 3 7/8" | 100 | 2 | 3 5/8" | 1" | 5/16" | 25 | 2" | Sleeve | Open | Zinc-Plated Steel | 00000000 | 00000 |
C | 2" | 7/8" | 2 3/4" | 100 | 1 4 | 5 1/4" | 2" | 1/2" 5/16" | 100 | 1 3/4" | Sleeve | Open | Zinc-Plated Steel | 00000000 | 00000 |
C | 3" | 13/16" | 3 7/16" | 120 | 1 4 | 5 1/4" | 2" | 1/2" 5/16" | 100 | 1 3/4" | Sleeve | Open | Zinc-Plated Steel | 00000000 | 00000 |
Nonmarking Black Solid Polyurethane Rubber Wheels—Hard | |||||||||||||||
D | 4" | 2" | 5 5/8" | 500 | 8 | 11" | 4" | 3/8" | 500 | 7/8" | Roller | Open | Zinc-Plated Steel | 00000000 | 000000 |
D | 5" | 2" | 6 1/2" | 500 | 8 | 11" | 4" | 3/8" | 500 | 7/8" | Roller | Open | Zinc-Plated Steel | 00000000 | 000000 |
D | 6" | 2" | 7 1/2" | 500 | 8 | 11" | 4" | 3/8" | 500 | 7/8" | Roller | Open | Zinc-Plated Steel | 00000000 | 000000 |
Black Powder-Coated Steel Casters with Polypropylene Wheels




The steel frame has a black powder-coated finish to blend in with your equipment. They have lightweight polypropylene wheels that roll well on smooth surfaces.
Wheels ride directly on the axle rather than on bearings, making these casters an economical choice for equipment not frequently moved.
Swivel casters have double-ball bearings for the smoothest swiveling.
For technical drawings and 3-D models, click on a part number.
Wheel | Frame | ||||||||
---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Hardness | Wheel Bearing Type | Material | Color | Each | |
Rigid | |||||||||
Nonmarking Black Solid Wheels—Hard | |||||||||
2 1/2" | 1 1/8" | 3 5/16" | 200 | Durometer 60D | Without Bearing | Powder-Coated Steel | Black | 00000000 | 000000 |
3" | 1 1/4" | 3 13/16" | 270 | Durometer 60D | Without Bearing | Powder-Coated Steel | Black | 00000000 | 00000 |
4" | 1 1/4" | 5" | 300 | Durometer 60D | Without Bearing | Powder-Coated Steel | Black | 00000000 | 00000 |
5" | 1 1/4" | 6 1/8" | 350 | Durometer 60D | Without Bearing | Powder-Coated Steel | Black | 00000000 | 00000 |
Swivel | |||||||||
Nonmarking Black Solid Wheels—Hard | |||||||||
2 1/2" | 1 1/8" | 3 5/16" | 200 | Durometer 60D | Without Bearing | Powder-Coated Steel | Black | 00000000 | 00000 |
3" | 1 1/4" | 3 13/16" | 270 | Durometer 60D | Without Bearing | Powder-Coated Steel | Black | 00000000 | 00000 |
4" | 1 1/4" | 5" | 300 | Durometer 60D | Without Bearing | Powder-Coated Steel | Black | 00000000 | 00000 |
5" | 1 1/4" | 6 1/8" | 350 | Durometer 60D | Without Bearing | Powder-Coated Steel | Black | 00000000 | 00000 |
Shock-Absorbing Casters with Rubber Wheels



Minimize shock to your load on bumpy surfaces with these spring-loaded casters. They have a soft, cushioning rubber tread for rolling on smooth and rough surfaces with a hard aluminum core for strength.
Wheels have roller bearings for smooth rolling.
Swivel casters have completely sealed double-ball bearings for the smoothest swiveling and the best protection against dust and debris.
For technical drawings and 3-D models, click on a part number.
Wheel | Wheel Bearing | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Mount Ht. | Max. Load Mount Ht. | Min. Cap. per Caster, lbs. | Cap. per Caster, lbs. | Hardness | Type | Material | Frame Material | Each | |
Rigid | |||||||||||
Black Tread-on-Core Wheels—Soft | |||||||||||
6" | 2" | 8 1/2" | 8 1/8" | 50 | 500 | Durometer 80A | Roller | Steel | Zinc-Plated Steel | 0000000 | 0000000 |
8" | 2" | 10 1/2" | 10 1/8" | 50 | 500 | Durometer 80A | Roller | Steel | Zinc-Plated Steel | 0000000 | 000000 |
Swivel | |||||||||||
Black Tread-on-Core Wheels—Soft | |||||||||||
6" | 2" | 8 1/2" | 8 1/8" | 50 | 500 | Durometer 80A | Roller | Steel | Zinc-Plated Steel | 0000000 | 000000 |
8" | 2" | 10 1/2" | 10 1/8" | 50 | 500 | Durometer 80A | Roller | Steel | Zinc-Plated Steel | 0000000 | 000000 |
High-Capacity Shock-Absorbing Casters with Polyurethane Wheels



The springs in these casters take on bumpy surfaces and obstructions while preventing shock to the load. Their polyurethane wheels combine the abrasion resistance of plastic with the impact resistance of rubber.
Made of hard polyurethane, solid wheels are impact resistant and roll easily on smooth surfaces, but can be noisy. Their swivels have double-ball bearings for the smoothest swiveling.
Tread-on-core wheels have an aluminum core that is harder than the tread, balancing strength with cushioning. They have a soft tread that is shock absorbing and provides good traction on rough surfaces. Their rounded treads are easier to turn than flat wheels.
Ball bearings in the wheel provide easy rolling. Their kingpinless swivel raceways distributes impact better than standard kingpin casters, enabling smoother swiveling and extending service life. They have ball bearings for smooth swiveling.
Sealed bearings are completely sealed for the best protection against dust and debris.
Optional swivel locks prevent the caster from swiveling with the twist of the ring.
For technical drawings and 3-D models, click on a part number.
Wheel | Wheel Bearing | Swivel | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Mount Ht. | Max. Load Mount Ht. | Min. Cap. per Caster, lbs. | Cap. per Caster, lbs. | Hardness | Tread Shape | Type | Seal Type | Material | Swivel Bearing Type | Each | |
Nonmarking Red Tread-on-Core Wheels—Soft | |||||||||||||
5" | 2" | 7 1/2" | 7 1/8" | 100 | 1,000 | Durometer 85A | Rounded | Ball | Sealed | Steel | Ball | 0000000 | 0000000 |
6" | 2" | 8" | 7 5/8" | 100 | 1,250 | Durometer 85A | Rounded | Ball | Sealed | Steel | Ball | 0000000 | 000000 |
8" | 2" | 10 1/8" | 9 3/4" | 100 | 1,500 | Durometer 85A | Rounded | Ball | Sealed | Steel | Ball | 0000000 | 000000 |
Nonmarking Gray Solid Wheels—Hard | |||||||||||||
4" | 2" | 7 1/2" | 6 1/2" | 200 | 900 | Durometer 55D | Flat | Ball | Sealed | Steel | Double Ball | 00000000 | 000000 |
5" | 2" | 9" | 8" | 200 | 1,000 | Durometer 55D | Flat | Ball | Sealed | Steel | Double Ball | 00000000 | 000000 |
6" | 2" | 9 1/2" | 8 1/2" | 200 | 1,000 | Durometer 55D | Flat | Ball | Sealed | Steel | Double Ball | 00000000 | 000000 |
8" | 2" | 11 1/2" | 10" | 200 | 800 | Durometer 55D | Flat | Ball | Sealed | Steel | Double Ball | 00000000 | 000000 |
Optional Swivel Lock for Tread-on-Core Wheels | 000000 | Each | 000000 |
Easy-Turn Dollies

For maneuverability in tight spaces, these dollies have two platforms that swivel independently. Their casters are often called triple-swivel casters or zero-throw casters. Ball bearings between the platforms on these dollies allow you to turn and position the load without any caster movement. Made of polyurethane, their wheels combine the abrasion resistance of plastic with the shock- and sound-absorbing qualities of rubber. They’re also nonmarking. Use them on smooth or rough floors and in areas with debris. The top platform has slots for permanent mounting (fasteners not included).
Platform | Mounting Hole | Wheel | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
O'all Cap., lbs. | Body Material | Lg. | Wd. | O'all Ht. | Wd. | Lg. | Ctr.-to-Ctr. Wd. | Ctr.-to-Ctr. Lg. | Fasteners Included | No. of | Wheel Configuration | Brake Type | Caster Mount Type | Dia. | Type | Each | |
Smooth Platform—Flush | |||||||||||||||||
Polyurethane Rubber Wheels | |||||||||||||||||
600 | Zinc-Plated Steel | 4 1/2" | 3 3/4" | 4 1/2" | 3/8" | 3/4" | 3" | 3 5/8" | No | 4 | Three Swivel Casters | None | Replaceable | 2 1/2" | Solid | 00000000 | 0000000 |
900 | Zinc-Plated Steel | 4 1/2" | 3 3/4" | 5 1/8" | 3/8" | 3/4" | 3" | 3 5/8" | No | 4 | Three Swivel Casters | None | Replaceable | 3" | Solid | 00000000 | 000000 |
1,200 | Zinc-Plated Steel | 6 1/4" | 4 1/2" | 5 1/2" | 1/2" | 1" | 3 3/8" | 5 1/4" | No | 4 | Three Swivel Casters | None | Replaceable | 2 1/2" | Solid | 00000000 | 000000 |
1,800 | Zinc-Plated Steel | 6 1/4" | 4 1/2" | 6 1/8" | 1/2" | 1" | 3 3/8" | 5 1/4" | No | 4 | Three Swivel Casters | None | Replaceable | 3" | Solid | 00000000 | 000000 |
Multidirectional High-Capacity Roller Dollies for Uneven Surfaces


Maneuver machines and heavy loads into confined spaces. These dollies have rollers that swivel independently, allowing movement in any direction. Rubber pads in the center grip loads without damaging the load surface. Handles on the dolly make them easier to pick up.
O'all | Roller | Nylon Plastic Rollers | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
O'all Cap., lbs. | Lg. | Wd. | Ht. | Platform Dia. | Body Color | Number per Dolly | Dia. | Features | Each | |
Powder-Coated Steel | ||||||||||
Rubber-Padded Platform | ||||||||||
2,200 | 17" | 15" | 3 15/16" | 6 11/16" | Red | 3 | 3" | Carrying Handles | 000000 | 000000000 |
4,400 | 27" | 20 5/16" | 4 5/16" | 6 11/16" | Red | 3 | 3 3/8" | Carrying Handles | 000000 | 00000000 |
8,800 | 29 1/2" | 22 1/8" | 4 5/16" | 9 13/16" | Red | 5 | 3 3/8" | Carrying Handles | 000000 | 00000000 |
13,200 | 30" | 22 1/8" | 4 11/16" | 9 13/16" | Red | 5 | 3 3/8" | Carrying Handles | 000000 | 00000000 |
17,600 | 26 3/4" | 21" | 4 11/16" | 9 13/16" | Red | 5 | 3 3/8" | Carrying Handles | 000000 | 00000000 |