Simplify connecting your thermocouple to thermometers and control panels—these connectors give your thermocouple a plug-in connection. To attach them to your thermocouple, first remove the panel on these connectors to expose the terminals. Then insert your thermocouple wire leads, tighten the terminals, and reattach the panel.

Create a connection point on a control panel to plug in thermocouples. These connectors can be wired and installed entirely from the front of your panel.

No need to take these connectors apart to wire them—just insert your wire leads and tighten the terminals to quickly give your thermocouple a plug-in connection. Choose a connector with the same thermocouple type as the thermocouple you’re attaching. You should also make sure the equipment you’re plugging these connectors into is also compatible with the same thermocouple type.

Thread these connectors into a hole for an easy way to plug in a thermocouple. With the wire leads in the back, connect them to controllers, thermometers, and other temperature reading devices.

Already mounted in a conduit box, these connection strips save you the effort of modifying a panel for installation. With six connections on each strip, you can plug in multiple thermocouples to monitor temperature at different points in your process. The sockets are numbered to help you identify thermocouples and keep your wires organized.

To install, remove the connection strip from the conduit box, then pull your wiring through. Attach the box to your conduit, wire up the back of the connection strip, and reattach it to the conduit box. Then just plug your thermocouples into the strip.