Thread Size Thread Size |
|---|
Material Material |
|---|
|
Mounting Location Mounting Location |
|---|
|
|
Capacity Capacity |
|---|
|
Beam Location Beam Location |
|---|
 |  |
| Bottom Mount | Bottom-Center Mount |
 | |
| Top Mount |
Width Width |
|---|
|
|
|
Length Length |
|---|
Height Height |
|---|
For Maximum Beam Thickness For MaximumBeam Thickness |
|---|
|
|
|
Finish Finish |
|---|
|
Specifications Met Specifications Met |
|---|
|
For Minimum Material Thickness For MinimumMaterial Thickness |
|---|
|
Threaded Rod Mounts
Fasten these brackets to ceilings, walls, beams, and joists to hang threaded rod.
Style A mounts install flush against the ceiling. They are also known as nut plates. To use, screw threaded rod directly into the threaded hole.
Style B mounts have an offset bracket that attaches to the ceiling. To use, screw threaded rod directly into the bracket.
Style C and style D mounts have an offset bracket that attaches to the wall. To use, screw threaded rod directly into the bracket.
Style E and style F mounts install flush against the wall. To use, insert threaded rod into the mounting hole and secure with a nut (not included).
Zinc-plated iron mounts have good corrosion resistance. 304 stainless steel mounts have excellent corrosion resistance.
Note: Capacity is for the mount only. Mounting surface and fastening hardware will affect the ultimate capacity.
For technical drawings and 3-D models, click on a part number.
Mounting Hole | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Material | For Thread Size | Cap., lbs. | Lg. | Wd. | Ht. | Thick. | Rod Distance from Mounting Surface | Ctr.-to-Ctr. | No. of | Dia. | Mounting Fasteners Included | Threaded Rod Included | Pkg. Qty. | Pkg. | |
Ceiling Mount | ||||||||||||||||
| A | Iron | 3/8"-16 | 175 | 2 3/4" | 1 3/8" | __ | 1/4" | __ | 1 15/16" | 2 | 1/4" | No | No | 1 | 0000000 | 00000 |
| A | Iron | 1/2"-13 | 175 | 2 3/4" | 1 3/8" | __ | 1/4" | __ | 1 15/16" | 2 | 1/4" | No | No | 1 | 0000000 | 0000 |
| A | Zinc-Plated Iron | 3/8"-16 | 175 | 2 3/4" | 1 3/8" | __ | 1/4" | __ | 1 15/16" | 2 | 1/4" | No | No | 1 | 0000000 | 0000 |
| A | Zinc-Plated Iron | 1/2"-13 | 175 | 2 3/4" | 1 3/8" | __ | 1/4" | __ | 1 15/16" | 2 | 1/4" | No | No | 1 | 0000000 | 0000 |
| A | 304 Stainless Steel | 3/8"-16 | 175 | 3 1/4" | 1 1/2" | __ | 1/4" | __ | 2 1/4" | 2 | 5/16" | No | No | 1 | 00000000 | 00000 |
| A | 304 Stainless Steel | 1/2"-13 | 175 | 3 3/4" | 1 1/2" | __ | 1/4" | __ | 2 1/4" | 2 | 5/16" | No | No | 1 | 00000000 | 00000 |
| B | Steel | 1/4"-20, 1/4"-28 | 150 | 7/8" | 3/4" | 1 7/8" | 1/8" | __ | __ | 1 | 1/4" | No | No | 10 | 00000000 | 0000 |
| B | Steel | 3/8"-16, 3/8"-24 | 150 | 7/8" | 3/4" | 1 7/8" | 1/8" | __ | __ | 1 | 1/4" | No | No | 10 | 00000000 | 0000 |
Wall Mount | ||||||||||||||||
| C | Zinc-Plated Steel | 3/8"-16 | 250 | __ | 1 1/8" | 3 1/4" | 1/4" | 3/4" | __ | 3 | 1/4", 1/2" | No | No | 10 | 00000000 | 00000 |
| D | Steel | 1/4"-20, 1/4"-28 | 150 | 7/8" | 3/4" | 1 5/8" | 1/8" | 1" | __ | 1 | 1/4" | No | No | 10 | 00000000 | 00000 |
| D | Steel | 3/8"-16, 3/8"-24 | 150 | 7/8" | 3/4" | 1 5/8" | 1/8" | 1" | __ | 1 | 1/4" | No | No | 10 | 00000000 | 00000 |
| E | Steel | 3/8"-16, 3/8"-24 | 650 | 2" | 2" | 2" | 1/8" | 1 3/16" | __ | 1 | 7/16" | No | No | 1 | 000000 | 0000 |
| E | Steel | 1/2"-13, 1/2"-20 | 650 | 2" | 2" | 2" | 1/8" | 1 3/16" | __ | 1 | 9/16" | No | No | 1 | 000000 | 0000 |
| E | Steel | 5/8"-11, 5/8"-18 | 850 | 2 1/2" | 2 1/2" | 2 1/2" | 1/4" | 1 3/8" | __ | 1 | 11/16" | No | No | 1 | 000000 | 0000 |
| E | Zinc-Plated Steel | 3/8"-16, 3/8"-24 | 650 | 2" | 2" | 2" | 1/8" | 1 3/16" | __ | 1 | 7/16" | No | No | 1 | 0000000 | 0000 |
| E | Zinc-Plated Steel | 1/2"-13, 1/2"-20 | 650 | 2" | 2" | 2" | 1/8" | 1 3/16" | __ | 1 | 9/16" | No | No | 1 | 0000000 | 0000 |
| E | Zinc-Plated Steel | 5/8"-11, 5/8"-18 | 850 | 2 1/2" | 2 1/2" | 2 1/2" | 1/4" | 1 3/8" | __ | 1 | 11/16" | No | No | 1 | 0000000 | 0000 |
| E | 304 Stainless Steel | 3/8"-16, 3/8"-24 | 650 | 2" | 2" | 2" | 1/4" | 1 1/8" | __ | 1 | 7/16" | No | No | 1 | 000000 | 00000 |
| E | 304 Stainless Steel | 1/2"-13, 1/2"-20 | 650 | 2" | 2" | 2" | 1/4" | 1 1/8" | __ | 1 | 9/16" | No | No | 1 | 000000 | 00000 |
| E | 304 Stainless Steel | 5/8"-11, 5/8"-18 | 850 | 2 1/2" | 2" | 2 1/2" | 3/8" | 1 1/2" | __ | 1 | 11/16" | No | No | 1 | 000000 | 00000 |
| F | Steel | 7/16"-14, 7/16"-20 | 750 | 9" | 2" | 9" | 1/4" | 8" | 6 1/2" | 2 | 9/16" | No | No | 1 | 0000000 | 00000 |
| F | Steel | 7/16"-14, 7/16"-20 | 750 | 13" | 2" | 13" | 1/4" | 12" | 10 1/2" | 2 | 9/16" | No | No | 1 | 0000000 | 00000 |
| F | Steel | 7/16"-14, 7/16"-20 | 750 | 19" | 2" | 19" | 1/4" | 18" | 16 1/2" | 2 | 9/16" | No | No | 1 | 0000000 | 000000 |
| F | Zinc-Plated Steel | 7/16"-14, 7/16"-20 | 750 | 9" | 2" | 9" | 1/4" | 8" | 6 1/2" | 2 | 9/16" | No | No | 1 | 0000000 | 00000 |
| F | Zinc-Plated Steel | 7/16"-14, 7/16"-20 | 750 | 13" | 2" | 13" | 1/4" | 12" | 10 1/2" | 2 | 9/16" | No | No | 1 | 0000000 | 00000 |
| F | Zinc-Plated Steel | 7/16"-14, 7/16"-20 | 750 | 19" | 2" | 19" | 1/4" | 18" | 16 1/2" | 2 | 9/16" | No | No | 1 | 0000000 | 000000 |
Threaded Rod Anchors
Install directly into a mounting surface to suspend threaded rod.
Anchors for steel have a sharp cutting point for mounting directly into steel. Use a drill along with the drive socket (sold separately) for installation.
Anchors for wood require a drill along with the drive socket (sold separately) for installation.
Anchors for concrete require a hole drilled by an ANSI 1/4" masonry bit. Use a rotary hammer or hammer drill along with the drive socket (sold separately) for installation.
Anchors with a 45° pivot angle have a swivel head, which makes them best for use in walls and ceilings that have an angled pitch.
Note: Capacity is for the anchor only. Mounting surface will affect the ultimate capacity.
For technical drawings and 3-D models, click on a part number.
Threaded Rod Anchors | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Screw | Drive Sockets | |||||||||||||
| For Thread Size | For Min. Material Thick. | Cap., lbs. | Wd. | Ht. | Size | Length | Pivot Angle | Material | Threaded Rod Included | Pkg. Qty. | Pkg. | Each | ||
Ceiling Mount | ||||||||||||||
For Steel | ||||||||||||||
| 1/4"-20 | 1/16" | 575 | 1/2" | 3/4" | 1/4" | 1" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 00000 | 000000000 | 000000 |
| 3/8"-16 | 1/16" | 325 | 5/8" | 1" | 1/4" | 1 1/8" | 45° | Zinc-Plated Steel | No | 5 | 000000000 | 00000 | 000000000 | 00000 |
| 3/8"-16 | 1/16" | 375 | 5/8" | 1" | 1/4" | 1 1/8" | 45° | Zinc-Plated Steel | No | 5 | 000000000 | 00000 | 000000000 | 00000 |
| 3/8"-16 | 1/16" | 375 | 5/8" | 1" | 1/4" | 1 7/8" | 45° | Zinc-Plated Steel | No | 5 | 000000000 | 00000 | 000000000 | 00000 |
| 3/8"-16 | 1/16" | 575 | 1/2" | 3/4" | 1/4" | 1" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 0000 | 000000000 | 00000 |
| 3/8"-16 | 1/16" | 575 | 1/2" | 3/4" | 1/4" | 1 1/2" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 0000 | 000000000 | 00000 |
| 3/8"-16 | 1/16" | 575 | 1/2" | 3/4" | 1/4" | 2" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 0000 | 000000000 | 00000 |
| 3/8"-16 | 1/16" | 1,125 | 1/2" | 3/4" | 1/4" | 1" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 0000 | 000000000 | 00000 |
| 3/8"-16 | 1/16" | 1,425 | 1/2" | 3/4" | 1/4" | 1 1/2" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 00000 | 000000000 | 00000 |
| 3/8"-16 | 1/8" | 1,225 | 1/2" | 3/4" | 1/4" | 1 1/2" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 00000 | 000000000 | 00000 |
| 3/8"-16 | 1/8" | 1,550 | 1/2" | 3/4" | 1/4" | 1 1/2" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 00000 | 000000000 | 00000 |
For Wood | ||||||||||||||
| 1/4"-20 | 2" | 375 | 5/8" | 13/16" | 1/4" | 2" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 0000 | 000000000 | 00000 |
| 3/8"-16 | 2" | 475 | 5/8" | 1" | 1/4" | 2" | 45° | Zinc-Plated Steel | No | 5 | 000000000 | 00000 | 000000000 | 00000 |
| 3/8"-16 | 2 1/2" | 650 | 5/8" | 13/16" | 5/16" | 2 1/2" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 0000 | 000000000 | 00000 |
| 3/8"-16 | 3" | 675 | 5/8" | 13/16" | 1/4" | 3" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 0000 | 000000000 | 00000 |
| 1/2"-13 | 2 1/2" | 875 | 5/8" | 13/16" | 5/16" | 2 1/2" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 0000 | 000000000 | 00000 |
For Concrete | ||||||||||||||
| 1/4"-20 | 1 1/4" | 475 | 3/8" | 27/64" | 1/4" | 1 1/4" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 0000 | 000000000 | 00000 |
| 1/4"-20 | 3 1/4" | 700 | 3/8" | 31/64" | 1/4" | 1 5/8" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 0000 | 000000000 | 00000 |
| 3/8"-16 | 3 1/4" | 200 | 5/8" | 3" | 1/4" | 2" | 45° | Zinc-Plated Steel | No | 5 | 000000000 | 00000 | 000000000 | 00000 |
| 3/8"-16 | 3 1/4" | 650 | 1/2" | 9/16" | 1/4" | 1 1/2" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 0000 | 000000000 | 00000 |
| 3/8"-16 | 3 1/4" | 675 | 1/2" | 21/32" | 3/8" | 1 5/8" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 00000 | 000000000 | 00000 |
| 3/8"-16 | 3 1/4" | 675 | 1/2" | 43/64" | 1/4" | 1 5/8" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 0000 | 000000000 | 00000 |
| 3/8"-16 | 3 1/2" | 1,150 | 1/2" | 21/32" | 3/8" | 2" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 00000 | 000000000 | 00000 |
| 3/8"-16 | 4" | 900 | 1/2" | 41/64" | 1/4" | 2 1/2" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 0000 | 000000000 | 00000 |
| 1/2"-13 | 3 1/2" | 1,150 | 11/16" | 55/64" | 3/8" | 2" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 00000 | 000000000 | 00000 |
Wall Mount | ||||||||||||||
For Steel | ||||||||||||||
| 3/8"-16 | 1/16" | 625 | 1/2" | 3/4" | 1/4" | 1" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 0000 | 000000000 | 00000 |
| 3/8"-16 | 1/16" | 800 | 1/2" | 3/4" | 1/4" | 1 1/2" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 0000 | 000000000 | 00000 |
| 3/8"-16 | 1/16" | 850 | 1/2" | 3/4" | 1/4" | 1" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 0000 | 000000000 | 00000 |
| 3/8"-16 | 1/16" | 850 | 1/2" | 3/4" | 1/4" | 1 1/2" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 00000 | 000000000 | 00000 |
| 3/8"-16 | 1/8" | 725 | 1/2" | 3/4" | 1/4" | 1 1/2" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 00000 | 000000000 | 00000 |
| 3/8"-16 | 1/8" | 925 | 1/2" | 3/4" | 1/4" | 1 1/2" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 00000 | 000000000 | 00000 |
For Wood | ||||||||||||||
| 1/4"-20 | 1 1/2" | 150 | 5/8" | 13/16" | 1/4" | 1" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 0000 | 000000000 | 00000 |
| 3/8"-16 | 2 1/2" | 350 | 5/8" | 13/16" | 5/16" | 2 1/2" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 0000 | 000000000 | 00000 |
Ceiling and Wall Mount | ||||||||||||||
For Steel | ||||||||||||||
| 3/8"-16 | 1/16" | 1,425 | 1/2" | 1" | 1/4" | 1" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 0000 | 000000000 | 00000 |
| 3/8"-16 | 1/16" | 1,425 | 1/2" | 1" | 1/4" | 1 1/2" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 00000 | 000000000 | 00000 |
| 3/8"-16 | 1/8" | 1,925 | 1/2" | 1" | 1/4" | 1 1/2" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 00000 | 000000000 | 00000 |
For Wood | ||||||||||||||
| 3/8"-16 | 2 1/4" | 875 | 1/2" | 1" | 5/16" | 2 1/4" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 00000 | 000000000 | 00000 |
For Concrete | ||||||||||||||
| 3/8"-16 | 4" | 675 | 1/2" | 1 1/8" | 5/16" | 2 1/4" | __ | Zinc-Plated Steel | No | 5 | 000000000 | 0000 | 000000000 | 00000 |
Beam Clamps for Threaded Rod
Attach these clamps to the flange of a beam, then hang a threaded rod from the threaded hole.
Styles A-C, F, J and K have a locknut to prevent loosening.
Styles D, E, and H have a threaded hole on the back for supporting a hanger or routing ring.
Zinc-plated iron clamps have mild corrosion resistance. Zinc-plated steel clamps have good corrosion resistance. 304 stainless steel clamps have excellent corrosion resistance and good chemical resistance. 316 stainless steel clamps have excellent corrosion and chemical resistance.
For technical drawings and 3-D models, click on a part number.
| Style | For Beam Shape | For Thread Size | For Thread Pitch, mm | For Max. Beam Thick. | Capacity, lbs. | Mount Type | Nut Style | Throat Dp. | Lg. | Wd. | Ht. | Threaded Rod Included | Each | |
Iron | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | Flat | 3/8"-16 | __ | 3/4" | 400 | Clamp On | Locknut | 3/4" | 1 5/8" | 7/8" | 1 3/4" | No | 0000000 | 00000 |
| A | Flat | 1/2"-13 | __ | 3/4" | 500 | Clamp On | Locknut | 3/4" | 1 5/8" | 7/8" | 1 3/4" | No | 0000000 | 0000 |
| A | Flat | 5/8"-11 | __ | 3/4" | 550 | Clamp On | Locknut | 5/8" | 1 7/8" | 1 1/4" | 2" | No | 0000000 | 0000 |
Steel | ||||||||||||||
| B | Flat, Tapered | 3/8"-16 | __ | 3/4" | 400 | Clamp On | Locknut | 1" | 2 1/2" | 5/8" | 2 3/8" | No | 00000000 | 0000 |
| B | Flat, Tapered | 1/2"-13 | __ | 3/4" | 500 | Clamp On | Locknut | 7/8" | 2 1/2" | 3/4" | 2 3/8" | No | 00000000 | 0000 |
| B | Flat, Tapered | 5/8"-11 | __ | 3/4" | 550 | Clamp On | Locknut | 7/8" | 2 3/8" | 7/8" | 2 3/8" | No | 00000000 | 0000 |
| B | Flat, Tapered | 3/4"-10 | __ | 3/4" | 600 | Clamp On | Locknut | 7/8" | 2 3/8" | 1" | 2 3/8" | No | 00000000 | 0000 |
| B | Flat, Tapered | 7/8"-9 | __ | 1" | 900 | Clamp On | Locknut | 1 1/4" | 3 3/8" | 1 1/4" | 3" | No | 00000000 | 00000 |
| C | Flat, Tapered | 3/8"-16 | __ | 5/8" | 1,500 | Clamp On | Locknut | 7/8" | 1 5/8" | 3/4" | 1 3/8" | No | 0000000 | 0000 |
| C | Flat, Tapered | 3/8"-16 | __ | 7/8" | 1,500 | Clamp On | Locknut | 11/16" | 1 1/2" | 3/4" | 1 5/8" | No | 0000000 | 0000 |
| C | Flat, Tapered | 1/2"-13 | __ | 5/8" | 4,050 | Clamp On | Locknut | 15/16" | 1 5/8" | 1 1/4" | 1 3/8" | No | 0000000 | 0000 |
| C | Flat, Tapered | 1/2"-13 | __ | 7/8" | 4,050 | Clamp On | Locknut | 3/4" | 1 5/8" | 1 1/2" | 1 5/8" | No | 0000000 | 0000 |
304 Stainless Steel | ||||||||||||||
| B | Flat, Tapered | 3/8"-16 | __ | 13/16" | 400 | Clamp On | Locknut | 1" | 2 3/8" | 5/8" | 2 3/8" | No | 0000000 | 00000 |
| B | Flat, Tapered | 1/2"-13 | __ | 13/16" | 500 | Clamp On | Locknut | 1 1/16" | 2 3/8" | 3/4" | 2 3/8" | No | 0000000 | 00000 |
Zinc-Plated Steel | ||||||||||||||
| D | Flat, Tapered | 1/4"-20 | __ | 1/2" | 75 | Clamp On | __ | 1/2" | 1 3/4" | 7/8" | 1 1/2" | No | 000000 | 0000 |
| D | Flat, Tapered | 3/8"-16 | __ | 3/4" | 200 | Clamp On | __ | 1/2" | 2 1/4" | 1 1/4" | 2" | No | 000000 | 0000 |
Zinc-Plated Iron | ||||||||||||||
| E | Flat, Tapered | 1/4"-20 | __ | 5/8" | 275 | Clamp On | __ | 1/2" | 1 1/2" | 1 1/8" | 1 1/2" | No | 000000000 | 0000 |
| E | Flat, Tapered | 5/16"-18 | __ | 3/4" | 525 | Clamp On | __ | 1/2" | 1 5/8" | 1 5/8" | 1 3/4" | No | 000000000 | 0000 |
| E | Flat, Tapered | 3/8"-16 | __ | 3/4" | 750 | Clamp On | __ | 5/8" | 2" | 2" | 1 7/8" | No | 000000000 | 0000 |
| E | Flat, Tapered | 1/2"-13 | __ | 7/8" | 900 | Clamp On | __ | 7/8" | 2 3/8" | 2 1/2" | 2 1/4" | No | 000000000 | 0000 |
| E | Flat, Tapered | 10-24 | __ | 3/4" | 275 | Clamp On | __ | 1/2" | 1 1/2" | 1 1/8" | 1 1/2" | No | 000000000 | 0000 |
| E | Flat, Tapered | M10 | 1.5 | 3/4" | 525 | Clamp On | __ | 1/2" | 1 5/8" | 1 5/8" | 1 3/4" | No | 000000 | 00000 |
| E | Flat, Tapered | M6 | 1 | 1/2" | 275 | Clamp On | __ | 1/2" | 1 1/2" | 1 1/8" | 1 1/2" | No | 000000 | 0000 |
| E | Flat, Tapered | M8 | 1.25 | 1/2" | 275 | Clamp On | __ | 1/2" | 1 1/2" | 1 1/8" | 1 1/2" | No | 000000 | 00000 |
316 Stainless Steel | ||||||||||||||
| E | Flat, Tapered | 1/4"-20 | __ | 3/4" | 150 | Clamp On | __ | 1/2" | 1 3/8" | 7/8" | 1 1/2" | No | 0000000 | 00000 |
| E | Flat, Tapered | 3/8"-16 | __ | 1" | 750 | Clamp On | __ | 3/4" | 2" | 1 7/8" | 2" | No | 0000000 | 00000 |
| E | Flat, Tapered | 1/2"-13 | __ | 1" | 1,100 | Clamp On | __ | 3/4" | 2 1/4" | 2 1/8" | 2 1/4" | No | 0000000 | 00000 |
| Style | For Beam Shape | For Thread Size | For Max. Beam Thick. | Capacity, lbs. | Mount Type | Nut Style | Throat Dp. | Lg. | Wd. | Ht. | Threaded Rod Included | Each | |
Iron | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| G | Flat, Tapered | 3/8"-16 | 13/16" | 250 | Clamp On | Locknut | 9/16" | 2" | 7/8" | 1 3/8" | No | 0000000 | 00000 |
| G | Flat, Tapered | 3/8"-16 | 1 1/4" | 250 | Clamp On | Locknut | 9/16" | 2" | 7/8" | 1 7/8" | No | 0000000 | 0000 |
| G | Flat, Tapered | 1/2"-13 | 13/16" | 750 | Clamp On | Locknut | 9/16" | 2 1/8" | 1 1/8" | 2" | No | 0000000 | 0000 |
| G | Flat, Tapered | 1/2"-13 | 1 1/4" | 750 | Clamp On | Locknut | 9/16" | 2 1/8" | 1 1/8" | 2 1/2" | No | 0000000 | 0000 |
Zinc-Plated Iron | |||||||||||||
| H | Flat, Tapered | 1/4"-20 | 7/8" | 100 | Clamp On | __ | 1/2" | 1 1/2" | 5/8" | 1 5/8" | No | 0000000 | 0000 |
| J | Flat, Tapered | 3/8"-16 | 3/4" | 400 | Clamp On | Locknut | 1/2" | 1 1/2" | 7/8" | 1 1/2" | No | 0000000 | 0000 |
| J | Flat, Tapered | 1/2"-13 | 3/4" | 500 | Clamp On | Locknut | 1/2" | 1 1/2" | 7/8" | 1 1/2" | No | 0000000 | 0000 |
| J | Flat, Tapered | 5/8"-11 | 3/4" | 600 | Clamp On | Locknut | 1/2" | 1 3/4" | 1" | 1 1/2" | No | 0000000 | 0000 |
| J | Flat, Tapered | 3/4"-10 | 3/4" | 800 | Clamp On | Locknut | 5/8" | 2" | 1 1/4" | 1 3/4" | No | 0000000 | 00000 |
| J | Flat, Tapered | 7/8"-9 | 3/4" | 1,200 | Clamp On | Locknut | 5/8" | 2 1/4" | 1 1/4" | 1 3/4" | No | 0000000 | 00000 |
304 Stainless Steel | |||||||||||||
| K | Flat, Tapered | 3/8"-16 | 3/4" | 400 | Clamp On | Locknut | 1/2" | 1 3/16" | 15/16" | 1 5/8" | No | 000000 | 0000 |
| K | Flat, Tapered | 1/2"-13 | 3/4" | 500 | Clamp On | Locknut | 1/2" | 1 1/2" | 7/8" | 1 1/2" | No | 000000 | 00000 |
Press-Fit Beam Clamps for Threaded Rod
A toothed clip secures these clamps to the beam—no fasteners required. Lightly tap with a hammer to install.
For technical drawings and 3-D models, click on a part number.
For Beam Thick. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Beam Shape | For Thread Size | Min. | Max. | Capacity, lbs. | Mount Type | Lg. | Wd. | Ht. | Threaded Rod Included | Each | |
Bottom and Top Mount | |||||||||||
Steel | |||||||||||
| Flat, Tapered | 1/4"-20 | 1/8" | 1/4" | 150 | Press Fit | 7/8" | 1 3/8" | 1 7/8" | No | 00000000 | 00000 |
| Flat, Tapered | 1/4"-20 | 5/16" | 1/2" | 150 | Press Fit | 7/8" | 1 3/8" | 2 1/4" | No | 00000000 | 0000 |
| Flat, Tapered | 1/4"-20 | 9/16" | 3/4" | 150 | Press Fit | 7/8" | 1 3/8" | 2 3/8" | No | 00000000 | 0000 |
| Flat, Tapered | 3/8"-16 | 1/8" | 1/4" | 150 | Press Fit | 7/8" | 1 3/8" | 1 7/8" | No | 00000000 | 0000 |
| Flat, Tapered | 3/8"-16 | 5/16" | 1/2" | 150 | Press Fit | 7/8" | 1 3/8" | 2 1/4" | No | 00000000 | 0000 |
| Flat, Tapered | 3/8"-16 | 9/16" | 3/4" | 150 | Press Fit | 7/8" | 1 3/8" | 2 3/8" | No | 00000000 | 0000 |
Sloped Beam Clamps for Threaded Rod
These clamps rotate 360° and pivot 45° to ensure the rod hangs straight, even on sloped beams. Clamps are zinc-plated steel or iron for mild corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| For Beam Shape | For Thread Size | For Max. Beam Thick. | Capacity, lbs. | Mount Type | Nut Style | Throat Dp. | Lg. | Wd. | Ht. | Threaded Rod Included | Each | |
Bottom Mount | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Zinc-Plated Steel | ||||||||||||
| Angled | 1/4"-20 | 1/4" | 160 | Clamp On | __ | 3/4" | 2 3/8" | 1" | 2 3/8" | No | 0000000 | 000000 |
| Angled | 3/8"-16 | 1/4" | 200 | Clamp On | __ | 3/4" | 2 3/8" | 1" | 2 3/8" | No | 0000000 | 00000 |
| Flat, Tapered | 3/8"-16 | 11/16" | 330 | Clamp On | Locknut | 1 1/16" | 2 1/16" | 2 1/16" | 3 1/8" | No | 0000000 | 00000 |
| Flat, Tapered | 3/8"-16, 1/2"-13 | 3/4" | 500 | Clamp On | __ | 1" | 2" | 1" | 3" | No | 0000000 | 00000 |
Bottom and Top Mount | ||||||||||||
Zinc-Plated Iron | ||||||||||||
| Flat, Tapered | 3/8"-16 | 3/4" | 540 | Clamp On | Locknut | 7/8" | 1 3/4" | 7/8" | 3 3/16" | No | 0000000 | 00000 |
Angled Beam Clamps for Threaded Rod
Also known as purlin clamps, these clamps are shaped to fit around beams that have a 45° or 90° lip.
Zinc-Plated Iron clamps have mild corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| For Beam Shape | For Thread Size | For Max. Lip Ht. @ Angle | For Max. Beam Thick. | Mount Type | Capacity, lbs. | Throat Dp. | Lg. | Wd. | Ht. | Threaded Rod Included | Each | |
Iron | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bottom Mount | ||||||||||||
| Flat, Tapered, Angled | 3/8"-16 | 1 1/2" @ 90°, 2" @ 45° | 1" | Clamp On | 400 | 13/16" | 3" | 1" | 3 3/8" | No | 00000000 | 000000 |
Zinc-Plated Iron | ||||||||||||
Bottom Mount | ||||||||||||
| Flat, Tapered, Angled | 3/8"-16 | 1 1/2" @ 90°, 2" @ 45° | 1" | Clamp On | 400 | 13/16" | 3" | 1" | 3 3/8" | No | 00000000 | 00000 |
Center-Mount Beam Clamps for Threaded Rod
For centered load distribution, these clamps grip both sides of the beam and hang threaded rod from below.
Style A clamps have a hanging bolt that slides through an eye nut (sold separately).
Style B clamps have an adjusting screw to fit a range of beam widths and an eye nut for hanging threaded rod.
Galvanized steel clamps have good corrosion resistance. 304 stainless steel clamps have excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Clamps | Eye Nuts | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | For Beam Shape | For Thread Size | For Min. Eye Dia. | For Beam Wd. | For Max. Beam Thick. | Capacity, lbs. | Mount Type | Lg. | Wd. | Ht. | Threaded Rod Included | Each | Each | ||
Bottom-Center Mount | |||||||||||||||
Galvanized Steel | |||||||||||||||
| A | Flat, Tapered | 5/16"-18 | 1/2" | 3" | 3/8" | 700 | Clamp On | 3 1/2" | 1 1/4" | 3" | No | 0000000 | 00000 | 0000000 | 00000 |
| A | Flat, Tapered | 5/16"-18 | 1/2" | 4" | 1/2" | 700 | Clamp On | 4 3/8" | 1 1/4" | 3" | No | 0000000 | 0000 | 0000000 | 0000 |
| A | Flat, Tapered | 5/16"-18 | 1/2" | 5" | 5/8" | 700 | Clamp On | 5 1/8" | 1 1/4" | 3" | No | 0000000 | 0000 | 0000000 | 0000 |
| A | Flat, Tapered | 5/16"-18 | 1/2" | 6" | 3/4" | 700 | Clamp On | 6 1/2" | 1 1/4" | 3" | No | 0000000 | 0000 | 0000000 | 0000 |
| A | Flat, Tapered | 5/16"-18 | 1/2" | 7" | 7/8" | 700 | Clamp On | 7 3/4" | 1 1/4" | 3" | No | 0000000 | 0000 | 0000000 | 0000 |
| A | Flat, Tapered | 3/8"-16 | 5/8" | 3" | 3/8" | 1,000 | Clamp On | 3 5/8" | 2" | 3 3/4" | No | 0000000 | 00000 | 0000000 | 0000 |
| A | Flat, Tapered | 3/8"-16 | 5/8" | 4" | 1/2" | 1,000 | Clamp On | 4 3/4" | 2" | 3 3/4" | No | 0000000 | 00000 | 0000000 | 0000 |
| A | Flat, Tapered | 3/8"-16 | 5/8" | 5" | 5/8" | 1,000 | Clamp On | 5 3/4" | 2" | 3 3/4" | No | 0000000 | 00000 | 0000000 | 0000 |
| A | Flat, Tapered | 3/8"-16 | 5/8" | 6" | 3/4" | 1,000 | Clamp On | 6 7/8" | 2" | 3 3/4" | No | 0000000 | 00000 | 0000000 | 0000 |
| A | Flat, Tapered | 3/8"-16 | 5/8" | 7" | 7/8" | 1,000 | Clamp On | 7 3/4" | 2" | 3 3/4" | No | 0000000 | 00000 | 0000000 | 0000 |
| A | Flat, Tapered | 3/8"-16 | 5/8" | 8" | 7/8" | 1,000 | Clamp On | 8 5/8" | 2" | 3 3/4" | No | 0000000 | 00000 | 0000000 | 0000 |
| A | Flat, Tapered | 5/8"-11 | 3/4" | 4" | 1/2" | 3,000 | Clamp On | 4 7/8" | 2" | 4 5/8" | No | 0000000 | 00000 | 0000000 | 0000 |
| A | Flat, Tapered | 5/8"-11 | 3/4" | 5" | 5/8" | 3,000 | Clamp On | 5 7/8" | 2" | 4 5/8" | No | 0000000 | 00000 | 0000000 | 0000 |
| A | Flat, Tapered | 5/8"-11 | 3/4" | 6" | 3/4" | 3,000 | Clamp On | 7" | 2" | 4 5/8" | No | 0000000 | 00000 | 0000000 | 0000 |
| A | Flat, Tapered | 5/8"-11 | 3/4" | 7" | 7/8" | 3,000 | Clamp On | 8" | 2" | 4 5/8" | No | 0000000 | 00000 | 0000000 | 0000 |
| A | Flat, Tapered | 5/8"-11 | 3/4" | 8" | 7/8" | 3,000 | Clamp On | 8 7/8" | 2" | 4 5/8" | No | 0000000 | 00000 | 0000000 | 0000 |
304 Stainless Steel | |||||||||||||||
| A | Flat, Tapered | 5/16"-18 | 1/2" | 3" | 3/8" | 700 | Clamp On | 3 1/2" | 1 1/4" | 3" | No | 0000000 | 00000 | 0000000 | 00000 |
| A | Flat, Tapered | 5/16"-18 | 1/2" | 4" | 1/2" | 700 | Clamp On | 4 3/8" | 1 1/4" | 3" | No | 0000000 | 00000 | 0000000 | 00000 |
| A | Flat, Tapered | 5/16"-18 | 1/2" | 5" | 5/8" | 700 | Clamp On | 5 1/8" | 1 1/4" | 3" | No | 0000000 | 00000 | 0000000 | 00000 |
| A | Flat, Tapered | 5/16"-18 | 1/2" | 6" | 3/4" | 700 | Clamp On | 6 1/2" | 1 1/4" | 3" | No | 0000000 | 00000 | 0000000 | 00000 |
| A | Flat, Tapered | 5/16"-18 | 1/2" | 7" | 7/8" | 700 | Clamp On | 7 3/4" | 1 1/4" | 3" | No | 0000000 | 00000 | 0000000 | 00000 |
Iron | |||||||||||||||
| B | Flat, Tapered | 3/8"-16 | __ | 2"-7" | 9/16" | 600 | Clamp On | 10" | 1 1/8" | 5 5/16" | No | 0000000 | 00000 | 000000 | 00 |
| B | Flat, Tapered | 1/2"-13 | __ | 2"-7" | 9/16" | 1,125 | Clamp On | 10" | 1 1/8" | 5 5/16" | No | 0000000 | 00000 | 000000 | 00 |
| B | Flat, Tapered | 5/8"-11 | __ | 2"-7" | 9/16" | 1,350 | Clamp On | 10" | 1 1/8" | 5 1/2" | No | 0000000 | 00000 | 000000 | 00 |
| B | Flat, Tapered | 3/4"-10 | __ | 2"-7" | 9/16" | 1,350 | Clamp On | 10" | 1 1/8" | 5 1/2" | No | 0000000 | 00000 | 000000 | 00 |
| B | Flat, Tapered | 7/8"-9 | __ | 2"-7" | 9/16" | 1,350 | Clamp On | 10" | 1 1/8" | 5 3/4" | No | 0000000 | 00000 | 000000 | 00 |
Angle Iron Clamps for Threaded Rod
A secure way to hang threaded rod from a pair of angles, such as those used in ceiling joists, without the need to drill or weld. These clamps are commonly used to suspend HVAC, conveyor, and other overhead systems. They may also be used to connect two pairs of angles at 90°. Clamps are zinc-plated steel for good corrosion resistance. Each clamp includes a bracket and square washer. Secure with a hex nut (sold separately).
Capacity is the maximum load for two clamps holding a pair of angles across parallel joists. The values listed are for the maximum distance between joists, which is 6 ft. For shorter distances, capacities are higher.
For technical drawings and 3-D models, click on a part number.
Washer | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Thread Size | For Angle Thick. | For Max. Beam Span, ft. | Capacity, lbs. | Mount Type | Inside Wd. | Lg. | Wd. | Ht. | Thick. | Threaded Rod Included | Material | No. Included | Each | |
Zinc-Plated Steel | ||||||||||||||
| 5/8"-11, 5/8"-18 | 3/16"-1/4" | 6 | 500 | Clamp On | 1 1/2" | 2 3/8" | 2" | 2" | 1/4" | No | Steel | 1 | 0000000 | 000000 |
Suspension Beams for Threaded Rod
Mount these beams across parallel roof joists to hang threaded rod and route pipe, duct, and other overhead systems in areas where there’s no anchoring point. Beams are shaped to fit beneath corrugated roofing. They include a threaded rod anchor for supporting a single threaded rod. Add more threaded rod anchors to support additional threaded rod and customize your setup.
For technical drawings and 3-D models, click on a part number.
| For Joist-to-Joist Lg., ft. | Cap. with 1 Threaded Rod Anchor, lbs. | Cap. with 2 Threaded Rod Anchors, lbs. | For Thread Size | Threaded Rod Included | Color | Includes | Each | |
Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
| 4 | 1,000 | 2,000 | 5/8"-11, 5/8"-18 | No | Black | 1 Threaded Rod Anchor, 2 Joist Brackets | 0000000 | 0000000 |
| 5 | 1,000 | 2,000 | 5/8"-11, 5/8"-18 | No | Black | 1 Threaded Rod Anchor, 2 Joist Brackets | 0000000 | 000000 |
| 6 | 1,000 | 2,000 | 5/8"-11, 5/8"-18 | No | Black | 1 Threaded Rod Anchor, 2 Joist Brackets | 0000000 | 000000 |
| 7 | 1,000 | 1,800 | 5/8"-11, 5/8"-18 | No | Black | 1 Threaded Rod Anchor, 2 Joist Brackets | 0000000 | 000000 |
| 8 | 1,000 | 1,550 | 5/8"-11, 5/8"-18 | No | Black | 1 Threaded Rod Anchor, 2 Joist Brackets | 0000000 | 000000 |
| Threaded Rod Anchors | 0000000 | Each | 000000 |