These metric Grade B7 threaded rods meet the pressure and temperature requirements of ASTM A193 and are often used to secure pressure tanks, valves, and flanges.

An economical alternative to Grade B7 and Grade B16 threaded rods, these metric Class 8.8 rods are suitable for fastening most machinery and equipment.

About half the strength of medium-strength steel threaded rods, use these metric fine-thread rods for light duty hanging, mounting, and fastening.

These metric 316 stainless steel threaded rods are more corrosion resistant than 18-8 and 410 stainless steel threaded rods and have excellent resistance to chemicals and salt water.

These metric brass threaded rods are corrosion resistant in wet environments, electrically conductive, and nonmagnetic.

These steel studs are zinc plated to resist corrosion in wet environments.

These metric 316 stainless steel studs have excellent resistance to chemicals and salt water. Also known as hanger bolts, use them to hang, mount, and fasten parts to wood structures.

For light duty applications, choose these metric-sized coupling nuts.

These metric coupling nuts have good chemical resistance.

One-third the weight of steel, aluminum coupling nuts resist corrosion in wet environments.

Brass coupling nuts are corrosion resistant in wet environments and electrically conductive.

Known for their strength, steel coupling nuts are available with a corrosion-resistant finish.

Often called sleeve nuts, these thread adapters fasten parts with right-hand threads to parts with left-hand threads.

Designed for use with right-hand, internally threaded rod ends, these rods have right-hand threads on both ends. Use them for remote valve operators, throttle controllers, shifting mechanisms, and virtually any push/pull assembly.

Similar to turnbuckles, these rods have right-hand threads on one end and left-hand threads on the other so you can make a linkage that adjusts for tension. Add right- and left-hand threaded rod ends to build your linkages.

Mount these externally threaded shafts into tapped holes rather than using a shaft support, or attach a hex nut, shaft collar, or other threaded accessory.

A shoulder near the end of the shaft allows for easy positioning of housings, shaft supports, and collars.

Attach threaded accessories, such as mixer propellers and fan blades, to the end of these shafts.

A flat surface area allows set screws to dig into the shaft for securely mounting gears, sprockets, and bearings.

Combine with a machine key to transmit torque to gears, sprockets, and other power transmission components.