Choose these locks if you need several that open with the same key. Locks arrive ready for single-point latching; for more holding power, add a latch kit for two-point latching or two latch kits for three-point latching (latch kits sold separately).

The T-handle on mortise-mount locks lifts and then folds out of the way when not in use.

Multiple-point latch kits have a rod and two rod guides. One guide attaches to the inside surface of your door, while the other attaches to your frame to create a latching point.

For technical drawings and 3-D models, click on a part number.

Choose these L-handle locks if you need several that open with the same key. Use them for single-point latching, or add latch kits (sold separately) for multiple-point latching to create additional holding power.

Multiple-point latch kits have a rod and two rod guides. One guide attaches to the inside surface of your door, while the other attaches to your frame to create a latching point.

For technical drawings and 3-D models, click on a part number.

Use these latches alone for single-point latching. Add latch kits (sold separately) for multiple-point latching and extra holding power.

Multiple-point latch kits have a rod and two rod guides. One guide attaches to the inside surface of your door, while the other attaches to your frame to create a latching point.

For technical drawings and 3-D models, click on a part number.

Design a latching system that fastens doors at multiple points—for extra security, these L-handle latches have a spot for a padlock. The L-handle latch acts as your base. Then add the included cam latch adapter to connect to additional latch points. For each new latch point, you need an inline or 90° cam latch, a rod, and two rod adapters. Weld cam latches to the inside of your enclosure door. These L-handle latches come with multiple cams, so you can change their fixed latching distance.

Inline cam latches come with multiple cams to accommodate different latching distances.

Inline roller cam latches rotate more smoothly than standard inline cam latches, making them easier to open and close. The cam won’t scratch or flake enclosure surfaces to protect electronics inside from paint or metal chips. Good for jobs when precise distances are unknown, they have an adjustable latching distance. Adjust the position of the cam before installing.

90° redirect cam latches mount to corners, so you can add latch points to the top or bottom of your door. To accommodate different latching distances, they come with multiple cams.

Rods connect latches to each other. Cut them to the length you need.

Rod adapters connect rods to latches. You need one for each rod end.

For technical drawings and 3-D models, click on a part number.

The ring handle is recessed to stay out of the way when not in use. This latch arrives ready for single-point latching; for more holding power, add a latch kit for two-point latching or two latch kits for three-point latching (latch kits sold separately). Select the turn direction of the latches when mounting the cam.

Multiple-point latch kits have a rod, two bushings, and two rod guides.

For technical drawings and 3-D models, click on a part number.

Choose these keyed alike locks when you need several that open with the same key. The ring handle is recessed to stay out of the way when not in use. These locks arrive ready for single-point latching; for more holding power, add a latch kit for two-point latching or two latch kits for three-point latching (latch kits sold separately). Select the turn direction of the locks when mounting the cam.

For technical drawings and 3-D models, click on a part number.

Create a keyed locking system that fastens doors at multiple points. The swing-handle lock rotates smoothly when you lift the handle to latch and unlatch the door. The handle lies flat when locked, which means it won’t snag anything passing by. This lock is often installed on server cabinets and electrical panels. It comes with multiple cams, so you can change its fixed latching distance.

You first need a swing-handle lock, which acts as the base for these locks. Add a latch point by connecting an inline or 90° cam latch using a cam latch adapter (sold separately). For each latch point, you’ll need a cam latch, a rod, and two rod adapters. Weld cam latches to the inside of your enclosure door.

Choose keyed alike locks when you need several locks that open with the same key. Choose keyed differently locks when you need locks that each open with a separate key.

For technical drawings and 3-D models, click on a part number.

Side, top, and bottom latching points secure large, heavy doors that are subject to strenuous use, such as those on trucks and large access doors. This padlockable latch has two handles; an outside handle with a spindle that mounts through the door and an inside safety-release handle that opens the latch even if the outside handle is locked. It has a straight cam for side latching. For top and bottom latching, rods connect the top and bottom slide bolts. Use a hacksaw to cut rods and spindle to size. Select the turn direction of the latch when mounting the cam.

Choose this keyed alike lock if you need several that open with the same key. Side, top, and bottom latching points secure large, heavy doors that are subject to strenuous use, such as those on trucks and large access doors. The lock has two handles; an outside handle with a spindle that mounts through the door and an inside safety-release handle that opens the latch even if the outside handle is locked. It has a straight cam for side latching. For top and bottom latching, rods connect the top and bottom slide bolts. Use a hacksaw to cut rods and spindle to size. Select the turn direction of the lock when mounting the cam.

Pair a handle with a cam latch and rod to create a keyed latching system that securely fastens doors at multiple points. Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal. Turn the handle a quarter turn to lock, then turn it another quarter turn to create compression and minimize rattling from vibration. The handle lies flat when locked, which means it won’t snag anything passing by. Choose these locks if you need several locks that open with the same key.

Add a padlock to keyed/padlockable handles for an added layer of security. These handles are often used in lockout-tagout procedures to ensure equipment is properly shut off.

Weld cam latches to the inside of your enclosure door. All come with multiple cams, so you can change their fixed latching distance. Latches for one rod can be used as the main latch with a handle to control one additional latch point. You can also use them as a final latch point along a line in your multipoint system. Latches for two rods can be used as the main latch with a handle that controls two additional latch points. Or use them as a midpoint latch that is controlled by the main latch for operating yet another latch along your multipoint system. Use 90° redirect cam latches on the inside corners of your door to redirect your multi-point latching system 90° and add additional points along other edges of the door.

Rods connect latches to each other. Cut them to the length you need.

For technical drawings and 3-D models, click on a part number.

Join a handle with a cam latch and rod to create a padlockable latching system that securely fastens doors at multiple points. The handle lies flat when locked, which means it won’t snag anything passing by. Also known as compression cam latches, these latches create a tighter hold than a traditional cam latch, making them useful for doors that have a seal. Turn the handle a quarter turn to lock, then turn it another quarter turn to create compression and minimize rattling from vibration. Add a padlock for extra security.

Weld cam latches to the inside of your enclosure door. All come with multiple cams, so you can change their fixed latching distance. Latches for one rod can be used as the main latch with a handle to control one additional latch point. You can also use them as a final latch point along a line in your multipoint system. Latches for two rods can be used as the main latch with a handle that controls two additional latch points. You can also use them as a midpoint latch that is controlled by the main latch for operating yet another latch along your multipoint system. Use 90° redirect cam latches on the inside corners of your door to redirect your multi-point latching system 90° and add additional points along other edges of the door.

Rods connect latches to each other. Cut them to the length you need.

For technical drawings and 3-D models, click on a part number.

Turn your existing quarter-turn cam locks or latches into a latching system that securely fastens doors at multiple points. Start by connecting a cam latch adapter to your lock or latch to create additional latch points. Then, add a cam latch, two rod adapters, and a rod for each latch point you’ll need. All cam latches weld to the inside of your enclosure door.

Inline cam latches come with multiple cams, so you can change their fixed latching distance.

Inline roller cam latches rotate more smoothly than standard inline cam latches, making them easier to open and close. The cam won't scrape paint or metal chips off the frame that can damage items in your enclosures. It also compresses a bit to help minimize rattling from vibration. Good for jobs when precise distances are unknown, these latches have an adjustable latching distance. Adjust the position of the cam before installing.

Use 90° redirect cam latches on the inside corners of your door to redirect your multi-point latching system 90° and add additional points along other edges of the door. They come with multiple cams, so you can change their fixed latching distance.

Rod adapters connect rods to latches. You need one for each rod end. Rods connect latches to each other. Cut them to the length you need.

For technical drawings and 3-D models, click on a part number.