Search Results
For Shaft Diameter For Shaft Diameter |
|---|
OD OD |
|---|
ID ID |
|---|
|
For Load Direction For Load Direction |
|---|
 | Thrust |
 | Combined Radial and Thrust |
Thickness Thickness |
|---|
Dynamic Thrust Load Capacity Dynamic ThrustLoad Capacity |
|---|
|
Static Thrust Load Capacity Static Thrust Load Capacity |
|---|
|
Maximum Speed Maximum Speed |
|---|
|
For Shaft Surface Smoothness (Ra) For Shaft SurfaceSmoothness (Ra) |
|---|
|
Specifications Met Specifications Met |
|---|
|
Dynamic Radial Load Capacity Dynamic RadialLoad Capacity |
|---|
|
|
Static Radial Load Capacity Static Radial Load Capacity |
|---|
|
|
About Ball and Roller Bearings
More
Needle-Roller Thrust Bearings
Thinner rollers allow these bearings to fit in tighter spaces than tapered-roller thrust bearings. Because of the large contact area between the rollers and washers (not included), these bearings are great for medium to heavy duty, low-friction jobs. For use on hardened and ground surfaces.
Washers allow you to use the bearing on unhardened and unground surfaces.
For technical drawings and 3-D models, click on a part number.
Bearings
Bearing
Thrust Load Cap., lbs. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | OD | Thick. | Dynamic | Static | Max. Speed, rpm | Lubrication | For Shaft Surface Smoothness (Ra), microns | Temp. Range, °F | Specifications Met | Each | |
Steel Rollers | |||||||||||
Open | |||||||||||
| 1/4" | 11/16" | 5/64" | 1,350 | 3,000 | 20,000 | Required | 16 | 0° to 240° | __ | 0000000 | 00000 |
| 5/16" | 3/4" | 5/64" | 1,150 | 2,950 | 24,000 | Required | 0.2 | 0° to 240° | __ | 0000000 | 0000 |
| 3/8" | 13/16" | 5/64" | 1,600 | 4,000 | 16,000 | Required | 16 | 0° to 240° | __ | 0000000 | 0000 |
| 1/2" | 15/16" | 5/64" | 1,900 | 5,300 | 13,000 | Required | 16 | 0° to 240° | __ | 0000000 | 0000 |
| 9/16" | 1" | 0.0781" | 1,700 | 4,800 | 18,000 | Required | 0.2 | 0° to 240° | __ | 00000000 | 0000 |
| 5/8" | 1 1/8" | 5/64" | 2,150 | 6,600 | 11,000 | Required | 16 | 0° to 240° | __ | 0000000 | 0000 |
| 3/4" | 1 1/4" | 5/64" | 2,400 | 8,000 | 9,500 | Required | 16 | 0° to 240° | __ | 0000000 | 0000 |
| 7/8" | 1 7/16" | 5/64" | 2,900 | 10,500 | 8,000 | Required | 16 | 0° to 240° | __ | 0000000 | 0000 |
| 7/8" | 1 11/16" | 5/64" | 4,400 | 18,600 | 7,500 | Required | 16 | 0° to 240° | __ | 0000000 | 0000 |
| 1" | 1 9/16" | 5/64" | 3,150 | 12,100 | 7,500 | Required | 16 | 0° to 240° | __ | 0000000 | 0000 |
| 1 1/16" | 1 5/8" | 5/64" | 3,400 | 13,700 | 8,400 | Required | 0.2 | 0° to 240° | __ | 00000000 | 0000 |
| 1 1/8" | 1 3/4" | 5/64" | 3,850 | 16,400 | 6,500 | Required | 16 | 0° to 240° | __ | 0000000 | 0000 |
| 1 1/4" | 1 15/16" | 5/64" | 4,500 | 20,500 | 6,000 | Required | 16 | 0° to 240° | __ | 0000000 | 0000 |
| 1 3/8" | 2 1/16" | 5/64" | 4,600 | 21,600 | 5,500 | Required | 16 | 0° to 240° | __ | 0000000 | 0000 |
| 1 1/2" | 2 3/16" | 5/64" | 4,850 | 23,800 | 5,000 | Required | 16 | 0° to 240° | __ | 0000000 | 0000 |
| 1 3/4" | 2 1/2" | 5/64" | 5,600 | 30,100 | 4,400 | Required | 16 | 0° to 240° | __ | 0000000 | 0000 |
| 2" | 2 3/4" | 5/64" | 5,800 | 32,600 | 4,000 | Required | 16 | 0° to 240° | __ | 0000000 | 0000 |
| 2 1/8" | 2 7/8" | 0.0781" | 5,450 | 30,800 | 5,800 | Required | 0.2 | 0° to 240° | __ | 00000000 | 0000 |
| 2 1/4" | 3" | 0.0781" | 5,550 | 31,900 | 5,600 | Required | 0.2 | 0° to 240° | __ | 00000000 | 0000 |
| 2 1/4" | 3" | 5/64" | 5,550 | 32,000 | 5,600 | Required | 0.2 | 0° to 240° | __ | 0000000 | 0000 |
| 2 1/2" | 3 1/4" | 5/64" | 6,200 | 37,500 | 3,300 | Required | 16 | 0° to 240° | __ | 0000000 | 00000 |
| 2 3/4" | 3 5/8" | 1/8" | 10,700 | 57,500 | 4,600 | Required | 0.2 | 0° to 240° | __ | 00000000 | 00000 |
| 3" | 3 3/4" | 5/64" | 6,600 | 42,500 | 2,800 | Required | 16 | 0° to 240° | __ | 0000000 | 00000 |
| 3 1/4" | 4 1/8" | 1/8" | 11,600 | 66,200 | 4,000 | Required | 0.2 | 0° to 240° | __ | 00000000 | 00000 |
| 3 3/4" | 4 5/8" | 1/8" | 12,600 | 77,400 | 3,500 | Required | 0.2 | 0° to 240° | __ | 00000000 | 00000 |
| 4 1/8" | 5 1/16" | 1/8" | 14,300 | 93,100 | 3,200 | Required | 0.2 | 0° to 240° | __ | 00000000 | 00000 |
| 4mm | 14mm | 2mm | 1,000 | 1,800 | 21,000 | Required | 16 | 0° to 240° | DIN 5405-2 | 000000 | 0000 |
| 5mm | 15mm | 2mm | 1,050 | 2,050 | 21,000 | Required | 16 | 0° to 240° | DIN 5405-2 | 000000 | 0000 |
| 6mm | 19mm | 2mm | 1,500 | 3,500 | 19,000 | Required | 16 | 0° to 240° | DIN 5405-2 | 0000000 | 0000 |
| 8mm | 21mm | 2mm | 1,750 | 4,350 | 18,000 | Required | 16 | 0° to 240° | DIN 5405-2 | 000000 | 0000 |
| 10mm | 24mm | 2mm | 2,050 | 5,700 | 17,000 | Required | 16 | 0° to 240° | DIN 5405-2 | 0000000 | 0000 |
| 12mm | 26mm | 2mm | 2,200 | 6,500 | 15,000 | Required | 16 | 0° to 240° | DIN 5405-2 | 0000000 | 0000 |
| 15mm | 28mm | 2mm | 2,550 | 8,050 | 13,000 | Required | 16 | 0° to 240° | DIN 5405-2 | 0000000 | 0000 |
| 17mm | 30mm | 2mm | 2,700 | 8,850 | 12,000 | Required | 16 | 0° to 240° | DIN 5405-2 | 0000000 | 0000 |
| 20mm | 35mm | 2mm | 2,950 | 10,450 | 10,000 | Required | 16 | 0° to 240° | DIN 5405-2 | 0000000 | 0000 |
| 25mm | 42mm | 2mm | 3,300 | 13,000 | 8,500 | Required | 16 | 0° to 240° | DIN 5405-2 | 0000000 | 0000 |
| 30mm | 47mm | 2mm | 3,650 | 15,700 | 7,500 | Required | 16 | 0° to 240° | DIN 5405-2 | 0000000 | 0000 |
| 35mm | 52mm | 2mm | 4,000 | 18,200 | 6,500 | Required | 16 | 0° to 240° | DIN 5405-2 | 0000000 | 0000 |
| 40mm | 60mm | 3mm | 6,300 | 25,500 | 6,000 | Required | 16 | 0° to 240° | DIN 5405-2 | 000000 | 00000 |
| 45mm | 65mm | 3mm | 6,700 | 28,700 | 5,000 | Required | 16 | 0° to 240° | DIN 5405-2 | 0000000 | 00000 |
| 50mm | 70mm | 3mm | 7,200 | 32,100 | 4,800 | Required | 16 | 0° to 240° | DIN 5405-2 | 0000000 | 00000 |
| 55mm | 78mm | 3mm | 8,500 | 41,800 | 4,300 | Required | 16 | 0° to 240° | DIN 5405-2 | 0000000 | 00000 |
| 60mm | 85mm | 3mm | 10,000 | 53,000 | 4,000 | Required | 16 | 0° to 240° | DIN 5405-2 | 000000 | 00000 |
| 65mm | 90mm | 3mm | 10,400 | 57,000 | 3,700 | Required | 16 | 0° to 240° | DIN 5405-2 | 0000000 | 00000 |
| 70mm | 95mm | 4mm | 12,100 | 57,000 | 3,500 | Required | 16 | 0° to 240° | DIN 5405-2 | 000000 | 00000 |
| 75mm | 100mm | 4mm | 12,400 | 60,000 | 3,300 | Required | 16 | 0° to 240° | DIN 5405-2 | 000000 | 00000 |
| 80mm | 105mm | 4mm | 12,500 | 63,000 | 3,100 | Required | 16 | 0° to 240° | DIN 5405-2 | 000000 | 00000 |
| 85mm | 110mm | 4mm | 13,000 | 65,100 | 2,950 | Required | 0.2 | 0° to 240° | DIN 5405-3, ISO 303 | 00000000 | 00000 |
| 90mm | 120mm | 4mm | 16,400 | 91,000 | 2,700 | Required | 0.2 | 0° to 240° | DIN 5405-3, ISO 303 | 00000000 | 00000 |
| 100mm | 135mm | 4mm | 20,400 | 125,850 | 2,420 | Required | 0.2 | 0° to 240° | DIN 5405-3, ISO 303 | 00000000 | 00000 |
| 110mm | 145mm | 4mm | 21,800 | 139,300 | 2,230 | Required | 0.2 | 0° to 240° | DIN 5405-3, ISO 303 | 00000000 | 000000 |
| 120mm | 155mm | 4mm | 22,900 | 152,800 | 2,070 | Required | 0.2 | 0° to 240° | DIN 5405-3, ISO 303 | 00000000 | 000000 |
| 130mm | 170mm | 5mm | 29,900 | 188,800 | 1,900 | Required | 0.2 | 0° to 240° | DIN 5405-3, ISO 303 | 00000000 | 000000 |
| 140mm | 180mm | 5mm | 31,000 | 202,300 | 1,780 | Required | 0.2 | 0° to 240° | DIN 5405-3, ISO 303 | 00000000 | 000000 |
| 150mm | 190mm | 5mm | 32,100 | 215,800 | 1,680 | Required | 0.2 | 0° to 240° | DIN 5405-3, ISO 303 | 00000000 | 000000 |
| 160mm | 200mm | 5mm | 33,200 | 229,300 | 1,590 | Required | 0.2 | 0° to 240° | DIN 5405-3, ISO 303 | 00000000 | 000000 |
Washers
Washer
| For Shaft Dia. | OD | Thick. | Washer Material | Specifications Met | Each | |
| 1/4" | 11/16" | 0.032" | Steel | __ | 00000000 | 00000 |
| 5/16" | 3/4" | 0.032" | Steel | __ | 00000000 | 0000 |
| 3/8" | 13/16" | 0.032" | Steel | __ | 00000000 | 0000 |
| 1/2" | 15/16" | 0.032" | Steel | __ | 0000000 | 0000 |
| 9/16" | 1" | 1/32" | Steel | __ | 00000000 | 0000 |
| 9/16" | 1" | 1/16" | Steel | __ | 00000000 | 0000 |
| 5/8" | 1 1/8" | 0.032" | Steel | __ | 0000000 | 0000 |
| 3/4" | 1 1/4" | 0.032" | Steel | __ | 0000000 | 0000 |
| 3/4" | 1 1/4" | 0.126" | Steel | __ | 0000000 | 0000 |
| 7/8" | 1 7/16" | 0.032" | Steel | __ | 0000000 | 0000 |
| 7/8" | 1 7/16" | 0.126" | Steel | __ | 0000000 | 0000 |
| 7/8" | 1 11/16" | 0.032" | Steel | __ | 0000000 | 0000 |
| 7/8" | 1 11/16" | 0.126" | Steel | __ | 0000000 | 0000 |
| 1" | 1 9/16" | 0.032" | Steel | __ | 0000000 | 0000 |
| 1" | 1 9/16" | 0.126" | Steel | __ | 0000000 | 0000 |
| 1 1/8" | 1 3/4" | 0.032" | Steel | __ | 0000000 | 0000 |
| 1 1/8" | 1 3/4" | 0.126" | Steel | __ | 0000000 | 0000 |
| 1 1/4" | 1 15/16" | 0.032" | Steel | __ | 0000000 | 0000 |
| 1 1/4" | 1 15/16" | 0.126" | Steel | __ | 0000000 | 0000 |
| 1 3/8" | 2 1/16" | 0.032" | Steel | __ | 0000000 | 0000 |
| 1 3/8" | 2 1/16" | 0.126" | Steel | __ | 0000000 | 00000 |
| 1 1/2" | 2 3/16" | 0.032" | Steel | __ | 0000000 | 0000 |
| 1 1/2" | 2 3/16" | 0.126" | Steel | __ | 0000000 | 0000 |
| 1 3/4" | 2 1/2" | 0.032" | Steel | __ | 0000000 | 0000 |
| 2" | 2 3/4" | 0.032" | Steel | __ | 0000000 | 0000 |
| 2" | 2 3/4" | 0.126" | Steel | __ | 0000000 | 00000 |
| 2 1/8" | 2 7/8" | 1/32" | Steel | __ | 00000000 | 0000 |
| 2 1/8" | 2 7/8" | 1/16" | Steel | __ | 00000000 | 0000 |
| 2 1/4" | 3" | 1/32" | Steel | __ | 00000000 | 0000 |
| 2 1/4" | 3" | 0.032" | Steel | __ | 00000000 | 0000 |
| 2 1/4" | 3" | 3/32" | Steel | __ | 00000000 | 00000 |
| 2 1/4" | 3" | 0.126" | Steel | __ | 00000000 | 0000 |
| 2 1/2" | 3 1/4" | 0.032" | Steel | __ | 00000000 | 0000 |
| 2 3/4" | 3 5/8" | 1/32" | Steel | __ | 00000000 | 0000 |
| 2 3/4" | 3 5/8" | 1/16" | Steel | __ | 00000000 | 00000 |
| 3" | 3 3/4" | 0.032" | Steel | __ | 00000000 | 00000 |
| 3" | 3 3/4" | 0.126" | Steel | __ | 00000000 | 00000 |
| 3 1/4" | 4 1/8" | 1/32" | Steel | __ | 00000000 | 00000 |
| 3 1/4" | 4 1/8" | 1/8" | Steel | __ | 00000000 | 00000 |
| 3 3/4" | 4 5/8" | 1/32" | Steel | __ | 00000000 | 00000 |
| 3 3/4" | 4 5/8" | 3/32" | Steel | __ | 00000000 | 00000 |
| 4 1/8" | 5" | 1/32" | Steel | __ | 00000000 | 00000 |
| 4 1/8" | 5" | 3/32" | Steel | __ | 00000000 | 00000 |
| 4mm | 14mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 0000 |
| 5mm | 15mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 0000 |
| 6mm | 19mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 0000 |
| 6mm | 19mm | 2.75mm | Steel | __ | 00000000 | 00000 |
| 8mm | 21mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 0000 |
| 8mm | 21mm | 2.75mm | Steel | __ | 00000000 | 0000 |
| 10mm | 24mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 10mm | 24mm | 2.75mm | Steel | __ | 0000000 | 0000 |
| 12mm | 26mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 12mm | 26mm | 2.75mm | Steel | __ | 0000000 | 0000 |
| 15mm | 28mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 15mm | 28mm | 2.75mm | Steel | __ | 0000000 | 0000 |
| 17mm | 30mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 17mm | 30mm | 2.75mm | Steel | __ | 0000000 | 00000 |
| 20mm | 35mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 20mm | 35mm | 2.75mm | Steel | __ | 0000000 | 00000 |
| 25mm | 42mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 25mm | 42mm | 3mm | Steel | __ | 0000000 | 00000 |
| 30mm | 47mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 30mm | 47mm | 3mm | Steel | __ | 0000000 | 00000 |
| 35mm | 52mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 35mm | 52mm | 3.5mm | Steel | __ | 0000000 | 00000 |
| 40mm | 60mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 0000 |
| 40mm | 60mm | 3.5mm | Steel | __ | 00000000 | 00000 |
| 45mm | 65mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 45mm | 65mm | 4mm | Steel | __ | 0000000 | 00000 |
| 50mm | 70mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 50mm | 70mm | 4mm | Steel | __ | 0000000 | 00000 |
| 55mm | 78mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 55mm | 78mm | 5mm | Steel | __ | 0000000 | 00000 |
| 60mm | 85mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 0000 |
| 60mm | 85mm | 4.75mm | Steel | __ | 00000000 | 00000 |
| 65mm | 90mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 0000 |
| 65mm | 90mm | 5.25mm | Steel | __ | 00000000 | 00000 |
| 70mm | 95mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 0000 |
| 70mm | 95mm | 5.25mm | Steel | __ | 00000000 | 00000 |
| 75mm | 100mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 00000 |
| 75mm | 100mm | 5.75mm | Steel | __ | 00000000 | 00000 |
| 80mm | 105mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 00000 |
| 80mm | 105mm | 5.75mm | Steel | __ | 00000000 | 00000 |
| 85mm | 110mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 00000 |
| 85mm | 110mm | 5.75mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 00000 |
| 90mm | 120mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 00000 |
| 90mm | 120mm | 6.5mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 00000 |
| 100mm | 135mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 00000 |
| 100mm | 135mm | 7mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 00000 |
| 110mm | 145mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 00000 |
| 110mm | 145mm | 7mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 000000 |
| 120mm | 155mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 00000 |
| 120mm | 155mm | 7mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 000000 |
| 130mm | 170mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 00000 |
| 130mm | 170mm | 9mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 000000 |
| 140mm | 180mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 00000 |
| 150mm | 190mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 000000 |
| 160mm | 200mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 000000 |
Washers for Needle-Roller Thrust Bearings
Washer
Adapt needle-roller thrust bearings to use on unhardened, unground surfaces.
For technical drawings and 3-D models, click on a part number.
| For Shaft Dia. | OD | Thick. | Washer Material | Specifications Met | Each | |
| 1/4" | 0.687" | 0.095" | Steel | __ | 00000000 | 00000 |
| 1/4" | 11/16" | 0.032" | Steel | __ | 00000000 | 0000 |
| 5/16" | 3/4" | 0.032" | Steel | __ | 00000000 | 0000 |
| 5/16" | 3/4" | 1/16" | Steel | __ | 00000000 | 0000 |
| 3/8" | 0.812" | 0.063" | Steel | __ | 00000000 | 0000 |
| 3/8" | 13/16" | 0.032" | Steel | __ | 00000000 | 0000 |
| 1/2" | 0.937" | 0.063" | Steel | __ | 00000000 | 0000 |
| 1/2" | 0.937" | 0.095" | Steel | __ | 00000000 | 0000 |
| 1/2" | 15/16" | 0.032" | Steel | __ | 0000000 | 0000 |
| 9/16" | 1" | 1/32" | Steel | __ | 00000000 | 0000 |
| 9/16" | 1" | 1/16" | Steel | __ | 00000000 | 0000 |
| 5/8" | 1 1/8" | 0.032" | Steel | __ | 0000000 | 0000 |
| 5/8" | 1 1/8" | 0.063" | Steel | __ | 00000000 | 0000 |
| 5/8" | 1 1/8" | 0.095" | Steel | __ | 00000000 | 0000 |
| 3/4" | 1 1/4" | 0.032" | Steel | __ | 0000000 | 0000 |
| 3/4" | 1 1/4" | 0.126" | Steel | __ | 0000000 | 0000 |
| 7/8" | 1 7/16" | 0.032" | Steel | __ | 0000000 | 0000 |
| 7/8" | 1 7/16" | 0.126" | Steel | __ | 0000000 | 0000 |
| 7/8" | 1 11/16" | 0.032" | Steel | __ | 0000000 | 0000 |
| 7/8" | 1 11/16" | 0.126" | Steel | __ | 0000000 | 0000 |
| 1" | 1 9/16" | 0.032" | Steel | __ | 0000000 | 0000 |
| 1" | 1 9/16" | 0.126" | Steel | __ | 0000000 | 0000 |
| 1 1/8" | 1 3/4" | 0.032" | Steel | __ | 0000000 | 0000 |
| 1 1/8" | 1 3/4" | 0.126" | Steel | __ | 0000000 | 0000 |
| 1 1/4" | 1 15/16" | 0.032" | Steel | __ | 0000000 | 0000 |
| 1 1/4" | 1 15/16" | 0.126" | Steel | __ | 0000000 | 0000 |
| 1 3/8" | 2 1/16" | 0.032" | Steel | __ | 0000000 | 0000 |
| 1 3/8" | 2 1/16" | 0.126" | Steel | __ | 0000000 | 00000 |
| 1 1/2" | 2 3/16" | 0.032" | Steel | __ | 0000000 | 0000 |
| 1 1/2" | 2 3/16" | 0.126" | Steel | __ | 0000000 | 0000 |
| 1 3/4" | 2 1/2" | 0.032" | Steel | __ | 0000000 | 0000 |
| 1 3/4" | 2 1/2" | 0.063" | Steel | __ | 00000000 | 0000 |
| 1 3/4" | 2 1/2" | 0.126" | Steel | __ | 00000000 | 0000 |
| 2" | 2 3/4" | 0.032" | Steel | __ | 0000000 | 0000 |
| 2" | 2 3/4" | 0.126" | Steel | __ | 0000000 | 00000 |
| 2 1/8" | 2 7/8" | 1/32" | Steel | __ | 00000000 | 0000 |
| 2 1/8" | 2 7/8" | 1/16" | Steel | __ | 00000000 | 0000 |
| 2 1/4" | 3" | 1/32" | Steel | __ | 00000000 | 0000 |
| 2 1/4" | 3" | 0.032" | Steel | __ | 00000000 | 0000 |
| 2 1/4" | 3" | 3/32" | Steel | __ | 00000000 | 00000 |
| 2 1/4" | 3" | 0.126" | Steel | __ | 00000000 | 0000 |
| 2 1/2" | 3 1/4" | 0.032" | Steel | __ | 00000000 | 0000 |
| 2 3/4" | 3 5/8" | 1/32" | Steel | __ | 00000000 | 0000 |
| 2 3/4" | 3 5/8" | 1/16" | Steel | __ | 00000000 | 00000 |
| 3" | 3 3/4" | 0.032" | Steel | __ | 00000000 | 00000 |
| 3" | 3 3/4" | 0.126" | Steel | __ | 00000000 | 00000 |
| 3 1/4" | 4 1/8" | 1/32" | Steel | __ | 00000000 | 00000 |
| 3 1/4" | 4 1/8" | 1/8" | Steel | __ | 00000000 | 00000 |
| 3 3/4" | 4 5/8" | 1/32" | Steel | __ | 00000000 | 00000 |
| 3 3/4" | 4 5/8" | 3/32" | Steel | __ | 00000000 | 00000 |
| 4 1/8" | 5" | 1/32" | Steel | __ | 00000000 | 00000 |
| 4 1/8" | 5" | 3/32" | Steel | __ | 00000000 | 00000 |
| 4mm | 14mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 0000 |
| 5mm | 15mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 0000 |
| 6mm | 19mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 0000 |
| 6mm | 19mm | 2.75mm | Steel | __ | 00000000 | 00000 |
| 8mm | 21mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 0000 |
| 8mm | 21mm | 2.75mm | Steel | __ | 00000000 | 0000 |
| 10mm | 24mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 10mm | 24mm | 2.75mm | Steel | __ | 0000000 | 0000 |
| 12mm | 26mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 12mm | 26mm | 2.75mm | Steel | __ | 0000000 | 0000 |
| 15mm | 28mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 15mm | 28mm | 2.75mm | Steel | __ | 0000000 | 0000 |
| 17mm | 30mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 17mm | 30mm | 2.75mm | Steel | __ | 0000000 | 00000 |
| 20mm | 35mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 20mm | 35mm | 2.75mm | Steel | __ | 0000000 | 00000 |
| 25mm | 42mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 25mm | 42mm | 3mm | Steel | __ | 0000000 | 00000 |
| 30mm | 47mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 30mm | 47mm | 3mm | Steel | __ | 0000000 | 00000 |
| 35mm | 52mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 35mm | 52mm | 3.5mm | Steel | __ | 0000000 | 00000 |
| 40mm | 60mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 0000 |
| 40mm | 60mm | 3.5mm | Steel | __ | 00000000 | 00000 |
| 45mm | 65mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 45mm | 65mm | 4mm | Steel | __ | 0000000 | 00000 |
| 50mm | 70mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 50mm | 70mm | 4mm | Steel | __ | 0000000 | 00000 |
| 55mm | 78mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 55mm | 78mm | 5mm | Steel | __ | 0000000 | 00000 |
| 60mm | 85mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 0000 |
| 60mm | 85mm | 4.75mm | Steel | __ | 00000000 | 00000 |
| 65mm | 90mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 0000 |
| 65mm | 90mm | 5.25mm | Steel | __ | 00000000 | 00000 |
| 70mm | 95mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 0000 |
| 70mm | 95mm | 5.25mm | Steel | __ | 00000000 | 00000 |
| 75mm | 100mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 00000 |
| 75mm | 100mm | 5.75mm | Steel | __ | 00000000 | 00000 |
| 80mm | 105mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 00000 |
| 80mm | 105mm | 5.75mm | Steel | __ | 00000000 | 00000 |
| 85mm | 110mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 00000 |
| 85mm | 110mm | 5.75mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 00000 |
| 90mm | 120mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 00000 |
| 90mm | 120mm | 6.5mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 00000 |
| 100mm | 135mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 00000 |
| 100mm | 135mm | 7mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 00000 |
| 110mm | 145mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 00000 |
| 110mm | 145mm | 7mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 000000 |
| 120mm | 155mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 00000 |
| 120mm | 155mm | 7mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 000000 |
| 130mm | 170mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 00000 |
| 130mm | 170mm | 9mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 000000 |
| 140mm | 180mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 00000 |
| 150mm | 190mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 000000 |
| 160mm | 200mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 000000 |
Combination Ball/Needle-Roller Bearings
A built-in thrust ball bearing reduces wear from adjacent shaft components, while the needle rollers support high radial loads. Install anywhere you would use separate bearings for radial and thrust loads.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | Thrust Load Cap., lbs. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ball Bearing OD, mm | Ball Bearing Wd., mm | Ring Material | Dynamic | Static | Dynamic | Static | Max. Speed, rpm | Lubrication | For Shaft Surface Smoothness (Ra), microinch | Temp. Range, °F | Each | |
Open | |||||||||||||||
| 12 | 21 | 23 | 27 | 9 | Steel | 1,650 | 1,900 | 2,170 | 2,490 | 9,000 | Required | 8 | -20° to 230° | 00000000 | 000000 |
| 15 | 24 | 23 | 29 | 9 | Steel | 2,150 | 2,800 | 2,230 | 2,740 | 8,500 | Required | 8 | -20° to 230° | 00000000 | 00000 |
| 17 | 26 | 25 | 31 | 9 | Steel | 2,550 | 3,600 | 2,420 | 3,250 | 8,500 | Required | 8 | -20° to 230° | 00000000 | 00000 |
| 20 | 30 | 30 | 36 | 10 | Steel | 3,300 | 5,300 | 3,190 | 4,420 | 7,000 | Required | 8 | -20° to 230° | 00000000 | 00000 |
| 25 | 37 | 30 | 43 | 11 | Steel | 4,250 | 6,700 | 4,050 | 6,670 | 6,300 | Required | 8 | -20° to 230° | 00000000 | 00000 |
| 30 | 42 | 30 | 48 | 11 | Steel | 4,550 | 7,750 | 4,200 | 7,550 | 5,600 | Required | 8 | -20° to 230° | 00000000 | 000000 |
| 35 | 47 | 30 | 53 | 12 | Steel | 4,950 | 9,150 | 4,500 | 8,450 | 5,300 | Required | 8 | -20° to 230° | 00000000 | 000000 |
| 40 | 52 | 32 | 61 | 13 | Steel | 5,350 | 10,600 | 6,045 | 11,240 | 4,500 | Required | 8 | -20° to 230° | 00000000 | 000000 |
| 45 | 58 | 32 | 66.5 | 14 | Steel | 5,600 | 11,600 | 6,250 | 12,380 | 4,500 | Required | 8 | -20° to 230° | 00000000 | 000000 |
| 50 | 62 | 35 | 71.5 | 14 | Steel | 6,750 | 15,400 | 6,450 | 13,510 | 4,300 | Required | 8 | -20° to 230° | 00000000 | 000000 |